基于RTI的PDM框架实现策略

近年来,随着分布交互仿真技术的不断发展,解决仿真系统互操作和重用的高层体系结构的提出,以及ＰＤＭ技术的广泛应用和面临的新的挑战,提出了基于ＲＴＩ的ＰＤＭ框架技术,采用ＲＴＩ作为框架的运行支撑系统,以及通过联邦的运行方式,支持企业的动态联盟。阐述了基于ＲＴＩ的ＰＤＭ框架的特点,并对其实现的策略和应用作了有意义的研究。     

基于HLA的舰空导弹协同制导作战仿真系统方案

针对舰空导弹协同制导仿真系统的设计问题,通过给定舰舰协同和空舰协同这两种典型协同制导作战模式的作战流程,对仿真系统的组成及组成单元的模型构成进行了深入的分析。基于高层体系结构HLA(High Level Architecture)分布式仿真技术,对分布式半实物的协同制导仿真系统进行了方案设计,并且通过采用实时操作系统内核和半实物仿真代理联邦成员的方法,有效地解决了半实物仿真的实时性要求和半实物仿真与分布式仿真的互操作等关键问题。     

逻辑分析仪部分参数测量结果的不确定度评定

介绍了逻辑分析仪部分参数测量结果的不确定度分析评定方法，评定过程及结论，可应用在对于计量标准进行相应指标的不确定度评定分析上。     

结冰飞机着陆阶段飞行安全包线确定及操纵应对策略

结冰会导致飞行安全包线收缩、严重威胁飞行安全,研究结冰后安全包线变化对于操纵应对策略设计及提高飞行安全具有重要意义。以美国国家航空航天局（NASA）的项目飞机GTM（Generic Transport Model）为研究对象,通过对飞机的气动参数进行多项式拟合,建立了结冰飞机纵向通道的动力学模型。为了得到能随结冰程度变化的安全包线,将可达性分析理论引入到对结冰飞机着陆过程的安全性分析。提出将正向可达集与反向可达集的交集作为飞行安全包线,其中可达集的确定是基于水平集方法求解哈密尔顿-雅克比方程的最优解。最后针对不同程度的结冰条件进行了操纵时域验证,并提出了相应的操纵控制策略。研究结果表明,轻度结冰对安全包线影响较小,整个着陆过程的飞行状态始终能在最优控制指导下保持在安全包线以内;但对于重度结冰,飞行安全包线收缩严重,常规操纵已经很难使飞机达到着陆要求,需要进行飞行状态改出处理。研究结果为指导飞行操纵及实时包线保护打下基础。     

NNW-TopViz流场可视分析系统

流场可视化技术采用图形图像直观地表现CFD数值模拟的计算结果,使用户能够方便地对这些数据进行分析、比较和研究。然而,CFD数值模拟的流动复杂,其产生的流场数据规模巨大、数据类型复杂、特征提取困难,传统的串行可视化软件效率低、交互手段单一,难以满足数据分析的需求。国家数值风洞（NNW）工程研制了一套流场数据处理可视化软件系统（NNW-TopViz,简称TopViz）,具有对流场数据处理与特征提取、几何图形绘制等可视化与交互功能。根据可视分析效率需求,TopViz实现了线程并行,在多核计算环境下有效提高了可视化计算和交互效率;针对流场特征提取困难、常规方法效率低的问题,TopViz实现了基于卷积神经网络的流场旋涡特征提取方法,提升了特征提取准确率和效率;为提高软件交互效率并提供便捷的交互方式和体验,基于头戴式显示设备和体感控制器构建沉浸式虚拟显示与交互平台,TopViz实现了手势和眼球凝视2种交互方法,提供沉浸式环境下多视图、多角度流场探测方式。     

New trade tree for manned mars missions

Recent studies on human missions to Mars suggest revisiting the parameters that have the most important impact on the complexity, the initial mass in low Earth orbit, the risks and the development costs for the first journey to the red planet. In the last NASA reference mission, a trade tree is proposed.     

厦门机场低空风切变产生的地理成因分析

厦门机场航班飞行遭遇低空风切变的频次较高,危及飞行安全。产生风切变的原因主要有两大类,一是大气运动本身的变化,一是地理、环境因素。本文着重分析因厦门机场地理环境及环境变化导致风切变产生的原因。     

LEVEL DECISION-MAKING FOR AERO-ENGINE MODULES BASED ON INCREMENTAL KNOWLEDGE LEARNING

The maintenance of an aero-engine usually includes three levels, and the maintenance cost and period greatly differ depending on the different maintenance levels. To plan a reasonable maintenance budget program, airlines would like to predict the maintenance level of aero-engine before repairing in terms of performance parame- ters, which can provide more economic benefits. The maintenance level decision rules are mined using the histori- cal maintenance data of a civil aero-engine based on the rough set theory, and a variety of possible models of upda- ting rules produced by newly increased maintenance cases added to the historical maintenance case database are in- vestigated by the means of incremental machine learning. The continuously updated rules can provide reasonable guidance suggestions for engineers and decision support for planning a maintenance budget program before repai- ring. The results of an example show that the decision rules become more typical and robust, and they are more accurate to predict the maintenance level of an aero-engine module as the maintenance data increase, which illus- trates the feasibility of the represented method.     

Investigation on Thermal Contact Conductance Based on Data Analysis Method of Reliability

The method of reliability is proposed for the investigation of thermal contact conductance (TCC) in this study. A new definition is introduced, namely reliability thermal contact conductance (RTCC), which is defined as the TCC value that meets the reliability design requirement of the structural materials under consideration. An experimental apparatus with the compensation heater to test the TCC is introduced here. A practical engineering example is utilized to demonstrate the applicability of the proposed approach. By using a statistical regression model along with experimental data obtained from the interfaces of the structural materials GH4169 and K417 used in aero-engine, the estimate values and the confidence level of TCC and RTCC values are studied and compared. The results show that the testing values of TCC increase with interface pressure and the proposed RTCC model matches the test results better at high interface pressure.     

基于电子倍增CCD的微光成像遥感器焦面电路设计

文章介绍了一种以EMCCD为探测器件的星载遥感器焦面电路实现方案。利用FPGA基于VHDL语言设计了驱动时序发生模块,运用直接数字频率合成技术、LVDS总线传输技术和大幅值信号放大技术构建了EMCCD硬件驱动电路。为满足卫星在线配置的需求,电路设置了遥控遥测接口模块。在EMCCD读出模块和焦面电源模块设计中提出了一定的降噪方法。最后,对EMCCD焦面电路样机进行测试,证实了该设计的有效性和可行性。