基于数据包络分析的民航发动机维修效果评价

对民航发动机维修效果进行评价可以为发动机承修厂的选择提供决策支持,同时有助于发现发动机承修厂的潜在问题。为了实现发动机维修效果的评价,首先提出了评价指标选择的原则,在此基础上给出了发动机维修效果评价指标体系,建立了基于数据包络分析的C2WH模型的发动机维修效果评价模型,并对模型的构建过程进行了描述。针对决策单元输入输出...     

基于高斯伪谱法的飞机下降段轨迹优化

以大型运输机为研究对象,进行风干扰下的飞机下降段轨迹优化.通过对飞机下降过程的分析,建立了飞机的运动学模型、油耗模型和大气模型,得出了问题的目标函数和约束.运用高斯伪谱法把最优控制问题转化为非线性规划问题,并用序列二次规划求解非线性规划问题.仿真计算得到飞机最短下降时间的最优轨迹,讨论了不同的成本指数对下降时间和燃油消耗的影响.仿真结果表明,成本指数越大,飞机下降时间越短,燃油消耗越多.     

航磁补偿技术及补偿质量的评价方法

航磁补偿的目的是要消除飞机平台引入的干扰磁场,对于高精度航空磁探来说,磁补偿质量直接制约了探测效果。文章按照航磁补偿的执行步骤进行了飞机平台磁干扰建模、模型参数求解方法、补偿飞行方案。另外,为了对补偿飞行的质量进行有效控制,采用量化指标对磁补偿效果进行评价,判定补偿效果的优劣。最后,基于 MFC软件平台开发了航磁补偿系数求解及补偿质量评价软件。     

舰载机着舰指标体系构建

舰载机着舰的难度很大、要求很高,而着舰系统的复杂性又使得指标要求涉及很多方面。为了从整体上明确着舰的指标要求,从而有利于着舰理论和工程等研究,整理了公开文献中分散的指标要求,并梳理了指标间的逻辑关系,最终构建了着舰指标体系,将指标归纳到总体框架中。研究结果对着舰的控制与分析等具有一定的参考价值。     

Microstructure and Optical Characterization of Magnetron Sputtered NbN Thin Films

Some fundamental studies on the preparation, structure and optical properties of NbN films were carried out. NbN thin films were deposited by DC reactive magnetron sputtering at different N2 partial pressures and different substrate temperatures ranging from –50 ℃ to 600 ℃. X-ray diffraction analysis (XRD) and scanning electron microscopy (SEM) were employed to characterize their phase com- ponents, microstructures, grain sizes and surface morphology. Optical properties inclusive of refractive indexes, extinction coefficients and transmittance of the NbN films under different sputtering conditions were measured. With the increase in the N2 partial pressure, δ-NbN phase structure gets forming and the grain size and lattice constant of the cubic NbN increasing. The deposited NbN film has relatively high values of refractive index and extinction coefficient in the wavelength ranging from 240 nm to 830 nm. Substrate tem- perature exerts notable influences on the microstructure and optical transmittance of the NbN films. The grain sizes of the δ-NbN film remarkably increase with the rise of the substrate temperature, while the transmittance of the films with the same thickness decreases. Ultra-fine granular film with particle size of several nanometers forms when the substrate is cooled to –50 ℃, and a remarkable aug- mentation of transmittance could be noticed under so low a temperature.     

A Novel Onboard-gateway-based Mechanism to Improve TCP Performance in Aeronautical Satellite Networks

The IP-based networks on aircraft serve to support Internet services via satellites. However, in aeronautical satellite hybrid net- works,the TCP protocol performance often deteriorates due to improper decreases and slow recovery of the congestion window. This paper proposes a window size determination and notification mechanism, onboard-gateway-based mechanism (OGBM), which is based on the onboard gateway in the networks on aircraft. A cross-layer approach is adopted by the onboard gateway to obtain the satellite link bandwidth information. And then, by the gateway, through changing the receiver’s advertised window field in ACK packets, TCP sources are notified of the window size of each TCP source calculated on the ground of bandwidth delay product and flow numbers. The mechanism is able to avoid improper changes of TCP window and serve multiple users. Simulation results show that the mechanism with the fairness index close to 1 improves TCP performance in aeronautical satellite networks.     

卫星遥测功率谱分析和调制度测量方法研究

残余载波调制是卫星测控中的常用调制体制。文章从理论上给出了该体制下信号的功率谱密度表达式,得到奇次谐波谱线展宽等结论,并通过仿真和实验进行了验证。利用所得结论讨论了遥测调制度测量方法,提出通过功率谱的2阶边带进行测量可以使结果得到改善。     

两种质量多元诊断理论(英文)

工厂中,多工序、多指标系统是常见的。在该系统中推行质量控制与诊断必须考虑下列两点：上工序对下工序的影响以及指标间的相关性。由于这两点是同时存在的,使得问题更加复杂。我们需要应用张公绪教授在１９９６年提出的两种质量多元诊断理论来解决此复杂问题。本文介绍了其基本原理和具体应用,实际应用结果与理论是一致的。     

基于数值模拟的超塑成形压力—时间曲线计算机辅助设计

确定压力随时间变化的关系曲线对于超塑成形工艺设计非常重要,本文在超塑成形压力计算时引入能量消耗控制策略,提出了一种压力－时间（Ｐ－Ｔ）曲线设计方法即恒能耗率法,实现了基于有际元数值模拟的超塑成形Ｐ－Ｔ曲线计算机辅助设计,文中对有关的压力控制算法及算式进行了较详细的介绍和推导,分别给出了半球壳自由胀形和圆筒形凹模约束成形过程的Ｐ－Ｔ曲线设计计算实例,并对计算结果进行了讨论,本文的研究拓宽了刚粘塑性有     

基于季节特性的航材备件定量订货模型

为达到降低库存费用、保障飞机持续适航的目的,建立定量订货模型,并通过对部分航材消耗数据的分析,提出利用中心移动平均法求得季节指数的方法,将其作为权系数对该模型进行修正,以提高航材采购数量的精确性。实验证明,该模型能有效地为航材备件的计划采购提供理论指导和决策支持。