基于立体视觉的孔探分析系统及其应用

孔探分析在现代航空发动机故障诊断中一直发挥着重要的作用，开发基于立体视觉的孔探分析系统，对提高故障诊断水平和预测准确度，节约发动机维护成本有着重要的现实意义，系统利用立体视觉技术以及图像处理技术，完成了对双目视觉左右图像的标定和匹配，实现了对实体表面的三维测量和立体重建，本文介绍了基于立体视觉的孔探分析系统的基本原理与主要功能，并结合应用实例验证了系统的有效性。     

串置双五分量天平的研制

本文介绍风洞应变天平中首次研制成功的一台串置双五分量天平。串置双天平由一块钢材制成。O_1天平固定在 O_2天平的受力端。O_2天平既能测量左平尾载荷,又能传递由 O_1天平测量的右平尾载荷。正确分析两台天平的受力传力路线和弹性变形的综合位移量,用严谨的数学公式描述两台天平测量的力和传递的力。对这两种力进行数学分解,形成数学模型,写出天平静校公式的数学表达式,并据此研制天平静校设备,分析天平在各分力作用下的弹性位移,写出弹性角公式。上述各点是串置双天平的核心问题。最后经风洞引导性实验证明,串置双天平的原理、方案、受力分析、静校公式等都是正确的。在国内外,串置双天平第一次用于风洞实验,获得了初步成功。     

卫星优化热设计方法

试图把最优化技术应用于卫星工程的热设计中,提出一种优化热设计的方法,并以14个节点模型作为实例进行了计算分析,采用Hooke-Jeeves 的直接搜索法得到了满意的结果。初步编制的计算机程序,可作为卫星热设计方案计算的基础。     

卫星通信的产业化

回顾了中国发展卫星通信的简要历史，介绍了中国卫星通信的现状和作用。在调查国内用户需求的基础上，预测了１９８８－２００２年国内用户对卫星通信转发器需要的数量。     

Online scheduling of distributed Earth observation satellite system under rigid communication constraints

This paper focused on online scheduling of distributed Earth observation satellite system in a dynamic environment. The objective was to maximize the total profit of the overall system by efficiently coordinating the different satellites with stochastic arrival of urgent tasks, subject to rigid communication and observation time window constraints. We formulated this problem as a single-task, single-robot, time-extended assignment problem with intra-schedule dependency using the multi-robot task assignment taxonomy and formulated the sub-problem after releasing urgent tasks in a mixed-integer linear programming model. We first described the online scheduling algorithm for a single satellite, then we proposed the modified consensus-based bundle algorithm (m-CBBA) and modified asynchronous consensus-based bundle algorithm (m-ACBBA) with synchronous and asynchronous communication, respectively. Compared with initial versions of CBBA and ACBBA, the modified versions added the communication loop prediction phases to efficiently utilize scarce communication opportunities and reduce the communication requirements. Additionally, we introduce two contract net protocol (CNP)-based algorithms for comparison, respectively SingleItem-CNP-based (SI-CNP) algorithm and Batch-CNP-based (BA-CNP) algorithm. Computational experiments indicated that both the total profit and percentage of scheduled urgent tasks achieved by the m-ACBBA and m-CBBA algorithms were much higher than those achieved by both SI-CNP and BA-CNP. Additionally, the number of communications needed by either m-ACBBA or m-CBBA algorithm was lower than that by SI-CNP. When the communication cost in the system is high, the m-CBBA algorithm is preferred because it balances the profit and the required number of communications. When the communication cost is low, the m-ACBBA algorithm is preferred because it achieves high total profit and high percentage of scheduled urgent tasks.     

飞机V型外倾双垂尾载荷校准技术

根据垂尾载荷校准及建模需求,对飞机V型外倾双垂尾结构受载情况进行了分析和简化,确定了校准试验载荷,研制了垂尾载荷校准试验专用龙门梁架。采用液压协调加载技术,完成了外倾双垂尾载荷校准试验,建立了满足测载要求的载荷模型。此种方法充分利用了左右垂尾外倾、双垂尾之间空间较大的特点,对左右垂尾对称施加向外的单点、多点载荷,加载载荷侧向分量左右自平衡,垂向分量依靠飞机自身重量即可平衡,飞机不需要复杂的固定与约束。试验中采用先搭建龙门框架,再停放飞机的方法,降低了试验风险、加快了试验进度,取得了良好的试验结果,对其他此类结构的载荷校准具有一定的借鉴作用。     

Adaptive suppression of passive intermodulation in digital satellite transceivers

For the performance issues of satellite transceivers suffering passive intermodulation interference,a novel and effective digital suppression algorithm is presented in this paper.In con trast to analog approaches,digital passive intermodulation (PIM) suppression approaches can be easily reconfigured and therefore are highly attractive for future satellite communication systems.A simplified model of nonlinear distortion from passive microwave devices is established in consid eration of the memory effect.The multiple high-order PIM products falling into the receiving band can be described as a bilinear predictor function.A suppression algorithm based on a bilinear poly nomial decorrelated adaptive filter is proposed for baseband digital signal processing.In consideration of the time-varying characteristics of passive intermodulation,this algorithm can achieve the rapidness of online interference estimation and low complexity with less consumption of resources.Numerical simulation results show that the algorithm can effectively compensate the passive intermodulation interference,and achieve a high signal-to-interference ratio gain.     

基于Visual Basic的互感器负荷箱测量仪校准系统的实现

为解决互感器负荷箱测量仪同相分量和正交分量的校准问题,在分析互感器负荷箱测量仪工作原理的基础上,设计了基于电子/电工组合式的互感器负荷箱测量仪校准装置,并简要说明装置电工部分、电子部分以及上位机软件的实现。经省级计量研究院验证结果表明,该装置校准结果符合0.2级要求,可作为标准装置解决1级互感器负荷箱测量仪量值溯源问题。     

Geometric calibration of Colour and Stereo Surface Imaging System of ESA’s Trace Gas Orbiter

There are many geometric calibration methods for “standard” cameras. These methods, however, cannot be used for the calibration of telescopes with large focal lengths and complex off-axis optics. Moreover, specialized calibration methods for the telescopes are scarce in literature. We describe the calibration method that we developed for the Colour and Stereo Surface Imaging System (CaSSIS) telescope, on board of the ExoMars Trace Gas Orbiter (TGO). Although our method is described in the context of CaSSIS, with camera-specific experiments, it is general and can be applied to other telescopes. We further encourage re-use of the proposed method by making our calibration code and data available on-line.