MAP-CA在视频压缩中的应用

信息时代的重要特征是信息的数字化,但数字化的视频数据量是非常巨大的。为了使数字化的视频信号更有效地传输,对其进行压缩势在必行。应用MAP-CA这个DSP芯片可以对视频图像进行MPEG-4标准的压缩,压缩比可以达到1000:1。在公用电话线上就可以连续传输视频,并能保持图像的质量,最高图像清晰度为768×576,可以达到接近DVD的画面效果。     

双模式高度表的测高系统设计与研究

将恒定差频和恒定周期两种体制用于一个调频式高度表测高是一次新的尝试。本文介绍了一种基于C8051F330单片机与RS422总线的某型无人机双模式高度表的测高系统。在测高系统原理分析的基础上，建立了延迟时间可随高度数据而改变的测高系统。从测量方法和测试结果上分析，测量数据结果准确且稳定性好。     

RF communications subsystem for the Radiation Belt Storm Probes mission

The NASA Radiation Belt Storm Probes (RBSP) mission, currently in Phase B, is a two-spacecraft, Earth-orbiting mission, which will launch in 2012. The spacecraft's S-band radio frequency (RF) telecommunications subsystem has three primary functions: provide spacecraft command capability, provide spacecraft telemetry and science data return, and provide accurate Doppler data for navigation. The primary communications link to the ground is via the Johns Hopkins University Applied Physics Laboratory's (JHU/APL) 18 m dish, with secondary links to the NASA 13 m Ground Network and the Tracking and Data Relay Spacecraft System (TDRSS) in single-access mode. The on-board RF subsystem features the APL-built coherent transceiver and in-house builds of a solid-state power amplifier and conical bifilar helix broad-beam antennas. The coherent transceiver provides coherency digitally, and controls the downlink data rate and encoding within its field-programmable gate array (FPGA). The transceiver also provides a critical command decoder (CCD) function, which is used to protect against box-level upsets in the C&DH subsystem. Because RBSP is a spin-stabilized mission, the antennas must be symmetric about the spin axis. Two broad-beam antennas point along both ends of the spin axis, providing communication coverage from boresight to 70°. An RF splitter excites both antennas; therefore, the mission is designed such that no communications are required close to 90° from the spin axis due to the interferometer effect from the two antennas. To maximize the total downlink volume from the spacecraft, the CCSDS File Delivery Protocol (CFDP) has been baselined for the RBSP mission. During real-time ground contacts with the APL ground station, downlinked files are checked for errors. Handshaking between flight and ground CFDP software results in requests to retransmit only the file fragments lost due to dropouts. This allows minimization of RF link margins, thereby maximizing data rate and thus data volume.     

基于CompactPCI总线的红外目标跟踪系统

红外目标跟踪方法的理论研究较多,而通用的实时跟踪系统较少。给出了具有CompactPCI总线、并行分布式结构的系统方案,核心是基于标准总线的实时系统,上位机实现卡尔曼预测,DSP并行完成频域转换与相关,CPLD实现总线接口控制。所实现的系统具有运算能力强、通信带宽大、可扩展性和通用性强的特点,实用表明了它的可行性。     

基于STFRFT的LFM引信抗欺骗干扰方法

针对线性调频脉冲压缩引信易受转发式假目标欺骗干扰问题,提出了基于短时分数阶傅立叶变换(STFRFT)的抗欺骗干扰方法。首先,通过分数阶傅立叶变换将回波信号与欺骗干扰各分量信号进行分离;再利用相同调频率的LFM信号经短时分数阶傅立叶变换后最大幅值与窗函数宽度成线性关系,而不同调频率的最大幅值不随窗函数宽度变化的特点,有效分辨假目标欺骗干扰,正确检测目标回波信号;最后,通过仿真证明了方法的正确性,并验证所提方法具有良好的抗欺骗干扰效果。     

Fabrication of Diamond-like Carbon Films by Ion Assisted Middle Frequency Unbalanced Magnetron Sputtering

Diamond-like carbon （DLC） films are deposited by the Hall ion source assisted by the mid-frequency unbalanced magnetron sputtering technique. The effects of the substrate voltage bias, the substrate temperature, the Hall discharging current and the argon/nitrogen ratio on the DLC film＇s performance were studied. The experimental results show that the film＇s surface roughness, the hardness and the Young＇s modulus increase firstly and then decrease with the bias voltage incrementally increases. Also when the substrate temperature rises, the surface roughness of the film varies slightly, but its hardness and Young＇s modulus firstly increase followed by a sharp decrease when the temperature surpassing 120 ℃. With the Hall discharging current incrementally rising, the hardness and Young＇s modulus of the film decrease and the surface roughness of the film on 316L stainless steel firstly decreased and then remains constant.     

雷达信息显示中扫描线抑制问题分析

根据在混合显示方式下原始视频和综合信息显示的特点，分析了在综合信息显示时间不足的情况下，增大其显示时间的方法，如何保证固定的刷新频率，及自适应扫描线抑制方法中相应控制信号的产生过程，还分析了减少扫描线对原始视频信息显示的影响。     

光线示波器振子的选用

为了准确地测量记录各种被测信号,应当正确地选用振子的固有频率和阻尼,适当地选取被测信号的大小,保持信号源内阻Ri与振子的内阻rg相匹配,同时要正确地调整光点位置,以减小圆弧误差.     

频率域鲁棒性分析方法及其在飞控中的应用

主要研究了频率域鲁棒稳定性分析的新方法及其在收音机横侧控制系统中的应用。为了提高计算效率，基于Ｎｙｑｕｉｓｔ判据，提出了对数和鲁棒稳定性的新判据，为了简化多变量频率域鲁棒性分析和设计方法，进一步提出了递Ｎｙｑｕｉｓｔ阵对占优势判别式，使计算量大大减少，所提出的鲁棒性新判据在飞机横侧向控制中的应用表明，该方法可以得到讼人满意的结果。     

外差式侦察接收机对频率捷变信号进行侦察的可行性

根据频率捷变信号的特点,分析了几种侦察体制下接收频率捷变信号需要的中频带宽、扫描步进频宽和截获时间,给出了对频率捷变信号侦察的可行性方案。