小子样精度鉴定技术研究

讨论了小子样下的Bayes精度鉴定技术研究的一般方法,分析了考虑验前信息可信度时方差的检验,检验分为简单假设和复杂假设2种情况。给出了临界区域以及犯弃真和采伪两类错误的概率。仿真结果表明了方法的合理性。     

主星带辅星群干涉SAR编队设计的约束条件

针对主星带辅星群干涉SAR的星载双站、斜视、空间基线等特点,从系统工作过程和测高性能分析角度出发,分别对主星带辅星编队干涉SAR编队设计的几个变量(主星与辅星群的距离、基线的长度和指向角)提出设计约束条件。对辅星回波时序、信噪比进行分析,得到主、辅星间距离设计的约束条件;对干涉测高精度进行分析,重点考虑空间基线去相关对干涉相位误差进而对测高精度的影响,给出基线长度和指向角与干涉测高精度的关系,得到基线长度和指向角设计的约束条件。仿真分析表明,由于干涉车轮和干涉钟摆编队是基于正侧视干涉几何提出的,它们的测高性能不是最优的。     

转台伺服系统的无超调设计

本文通过分析国内外陀螺漂移测试转台伺服系统的现有设计方案,对其伺服系统的无超调设计进行了探讨。最后采用了粗精双回路切换方案,这为提高测试转台的精度和动态性能提供了新的途径。     

北斗/GPS双频载波相位单点定位模型及精度分析

针对海洋工程实时米级绝对定位需求,利用双频伪距、载波相位观测量和同时估计接收机位置、接收机钟差和载波相位模糊度,构建了一种双频载波相位实时单点定位方法.亚太区域14个测站试验结果显示:北斗水平和高程定位RMS分别为1.33m和1.81m,GPS为0.60m和0.85m,北斗/GPS组合为0.56m和0.72m;船载动态...     

Error modeling and compensating of a novel 6-DOF aeroengine rotor docking equipment

In the docking process of aeroengine rotor parts, docking accuracy that indicates the gaps between the end faces is strictly required. A key issue is improving docking accuracy using automated docking equipment. In this paper, a systematic study is carried out on the error modeling and compensation of a novel six-degrees-of-freedom(6-DOF) docking equipment for aeroengine rotors. First, a new model for indicating the main indexes of docking accuracy is proposed. Then, the error model of a special...     

Radially loading rotary extrusion for manufacturing large-size conical cylinders with inner transverse high ribs

The Large-size Conical Cylinders with Inner Transverse High Ribs (LCCWITHR) can reduce the weight of the parts while maintaining high rigidity and strength. Radially Loading Rotary Extrusion (RLRE) forming technology can achieve integral forming of LCCWITHR through the synergy of radial and rotary movements of dies. The flow law of the material during the forming process is the key to forming large-size inner ribs. At present, there is no unified understanding of the metal flow law of RLRE forming technology. An analytical expression was derived to predict the Radial Direction (RD) deformation loads. The FE simulation and process experiment were carried out to investigate the effects of the inclination angle, thickness factor and transition arc radius of the split top dies on the spacing of the metal diversion plane, the metal flow velocity of the rib area and the final radius of the inner rib. The influence of the split top dies loading distance and the bottom die rotation angle of each pass on the inner radius of the inner rib was verified. And the optimal combination of dies shape parameters and loading paths which can make the metal flow orderly was obtained: the inclination angle is 140°, the thickness factor is 3.64, the transition arc radius is 16 mm; the top dies loading distance is 15 mm, the bottom die rotation angle is 45°. The FE simulation results have been found to be in close agreement with physics experiment. The research results reveal the metal flow law of rib growth in the RLRE of LCCWITHR, which lays a theoretical foundation for subsequent thorough research and process optimization.     

有限元仿真模型V&V技术研究

仿真模型建模过程存在多种误差输入，将引起仿真预测结果的不精确性。采用仿真模型V&V（Verification and Validation,验证与确认）技术，进行仿真模型的建模误差分析与控制。利用物理试验数据进行仿真模型的精度评估，基于模型修正算法进行仿真建模参数的自动修正，提升仿真和试验结果的一致性，帮助设计师基于精确的仿真模型进行产品的虚拟性能预示，提升仿真技术在产品研制流程中的地位和作用。阐述了模型V&V的概念和流程，对模型V&V的关键技术和原理进行了详细论述,以NASA Rotor37转子验模为例进行了V&V案例说明。