Calibration of IRI–ITU-R peak density and height over the oceans with topside sounding data

Accuracy of IRI electron density profile depends on the F2 layer peak density and height converted by empirical formulae from the critical frequency and M3000F2 factor provided by the ITU-R (former CCIR). The CCIR/ITU-R maps generated from ground-based ionosonde measurements suffer from model assumptions, in particular, over the oceans where relatively few measurements are available due to a scarcity of ground-based ionosondes. In the present study a grid-point calibration of IRI/ITU-R maps for the foF2 and hmF2 over the oceans is proposed using modeling results based on the topside true-height profiles provided by ISIS1, ISIS2, IK-19 and Cosmos-1809 satellites for the period of 1969–1987. Topside soundings results are compared with IRI and the Russian standard model of ionosphere, SMI, and grouped to provide an empirical calibration coefficient to the peak density and height generated from ITU-R maps. The grid-point calibration coefficients maps are produced in terms of the solar activity, geodetic latitude and longitude, universal time and season allowing update of IRI–ITU-R predictions of the F2 layer peak parameters.     

一种改进的跨声速旋成体壁面脉动压力经验预测公式

使用大涡模拟（LES）方法对典型整流罩旋成体结构进行非定常数值模拟研究,结果表明引起壁面压力脉动的流场结构随时间和空间变化,不同的流场结构之间相互干扰。同时研究发现,旋成体折角膨胀会造成流动在较短的距离内迅速加减速,同样引起壁面压力脉动。基于上述流动现象,重新划分压力脉动产生区域,通过引入空间修正项,提出一套改进的跨声速旋成体壁面脉动压力经验公式。算例表明,该方法能够显著提高旋成体在跨声速条件下的脉动压力分布的预测精度。     

利用TDLAS技术评估火箭基组合循环发动机试验性能

针对宽范围工作的火箭基组合循环（RBCC）发动机推力、比冲和燃烧效率等性能难以通过关键参数的实时测量直接计算的问题,提出利用可调谐二极管激光器吸收光谱（TDLAS）技术实现发动机燃气温度、H2O组分浓度和速度多参数同时实时在线非接触式激光光谱测量方法,搭建用于RBCC地面试验性能分析的时分复用-扫描波长TDLAS系统。通过试验获得的(7444.352+7444.371)/7185.597cm -1 谱线附近吸收光谱,从而得到燃气温度、H2O组分浓度和速度参数,并结合数值模拟方法确定的流场参数纵向分布,实现基于关键参数在线测量的发动机性能直接计算。该方法有助于评判燃烧组织和结构改变对发动机性能的影响。     

固体火箭发动机冲击响应分析中改进的Wilson－θ法

在Ｗｉｌｓｏｎ－θ法基础上引入参数γ，提出了修正的振动平衡方程和初始条件表达式。研究了新方法的稳定性和γ系数的取值范围，并以某些导弹的发动机壳体为算例和实验对象，验证了新方法的正确性和在抑制超调现象方面的有效性。     

Multi-disciplinary design optimization with fuzzy uncertainties and its application in hybrid rocket motor powered launch vehicle

In this paper, an Uncertainty-based Multi-disciplinary Design Optimization (UMDO) method combining with fuzzy theory and Multi-Discipline Feasible (MDF) method is developed for the conceptual design of a Hybrid Rocket Motor (HRM) powered Launch Vehicle (LV). In the method proposed, membership functions are used to represent the uncertain factors, the fuzzy statistical experiment is introduced to analyze the propagation of uncertainties, and means, standard deviations and credibility measures are used to delineate uncertain responses. A geometric programming problem is solved to verify the feasibility of the Fuzzy-based Multi-Discipline Feasible (F-MDF) method. A multi-disciplinary analysis of a three-stage HRM powered LV involving the disciplines of propulsion, structure, aerodynamics and trajectory is implemented, and the mathematical models corresponding to the F-MDF method and the MDF method are established. A two-phase optimization method is proposed for multi-disciplinary design optimization of the LV, including the orbital capacity optimization phase based on the Ziolkowski formula, and the scheme trajectory verification phase based on the 3-degree-of-freedom point trajectory simulation. The correlation coefficients and the quadratic Response Surface Method (RSM) based on Latin Hypercube Sampling (LHS) are adopted for sensitive analysis of uncertain factors, and the Multi-Island Genetic Algorithm (MIGA) is adopted as the optimization algorithm. The results show that the F-MDF method is applicable in LV conceptual design, and the design with the F-MDF method is more reliable and robust than that with the MDF method.     

空中电场传感器

为了监测雷雨云下或云中电荷层的形成和演变,研制了一种空中电场传感器,它利用对金属定子采用交替屏蔽的原理来测量准稳态的大气电场。对仪器的工作原理,结构特点和技术指标作了较详细的介绍,并对该仪器的应用作了简短论述。     

用加速度计的积分遥测量计算弹道参数及轨道要素

文章提供利用运载火箭特征点(关机点,入轨点等)的有关加速度计的积分遥测量计算该点的弹道参数和轨道要素的计算方法。     

Aerospike nozzle contour design and its performance validation

A simplified design and optimization method of aerospike nozzle contour and the results of tests and numerical simulation of aerospike nozzles are presented. The primary nozzle contour is approximated by two circular arcs and a parabola; the plug contour is approximated by a parabola and a third-order polynomial. The maximum total impulse from sea level to design altitude is adopted as objective to optimize the aerospike nozzle contour. Experimental studies were performed on a 6-cell tile-shaped aerospike nozzle, a 1-cell linear aerospike nozzle and a 3-cell aerospike nozzle with round-to-rectangle (RTR) primary nozzles designed by method proposed in present paper. Three aerospike nozzles achieved good altitude compensation capacities in the tests and still had better performance at off-design altitudes compared with that of the bell-shaped nozzle. In cold-flow tests, 6-cell tile-shaped aerospike nozzle and 1-cell linear aerospike nozzle obtained high thrust efficiency at design altitude. Employing gas H₂/gas O₂ (GH₂/GO₂) as propellants, hot-firing tests were carried out on a 3-cell aerospike nozzle engine with RTR primary nozzles. The performance was obtained under two nozzle pressure ratios (NPR) lower than design altitude. Efficiency reached 92.0–93.5% and 95.0–96.0%, respectively. Pressure distribution along plug ramp was measured and the effects of variation in the amount of base bleed on performance were also examined in the tests.     

RBCC引射/亚燃模态过渡工作过程数值模拟

针对模态过渡过程中的瞬变特性,开展了引射/亚燃模态过渡工作过程中的RBCC进气道/燃烧室一体化数值模拟,计算比较了四种不同的模态过渡方案,分析了模态过渡工作过程中流动、燃烧模式和进气道状态的瞬变过程,研究结果表明:(1)推力产生较大波动的主要原因是燃烧室内燃烧/流动参数匹配性差和在流动方向上燃烧放热间断引起的;(2)主火箭保留的燃气在模态过渡过程中起到了火焰稳定和自持燃烧的作用,保留合理流量的燃气不仅可以缩短模态过渡时间,而且可以提高发动机的比冲;(3)提出了通过调节燃料喷注策略和主火箭节流方式实现模态平稳过渡的方案,并对该方案进行了数值验证,可望为进一步的实验研究提供了燃烧控制方法。     

Ionospheric oscillations caused by geomagnetic Pi2 pulsations and their observations by multipoint continuous Doppler sounding; first results

In 2004, we started operating a continuous Doppler sounding system to investigate ionospheric signatures of infrasonic, short period acoustic gravity waves and geomagnetic pulsations. Since January 2007, four stable 3.59 MHz transmitters have been in operation in the western part of the Czech Republic. Multipoint measurements enable us to investigate horizontal propagation of waves and disturbances in the ionosphere and to estimate horizontal distances over which these waves (disturbances) are correlated.