Aerodynamic optimization of rotor airfoil based on multi-layer hierarchical constraint method

Rotor airfoil design is investigated in this paper. There are many difficulties for this high-dimensional multi-objective problem when traditional multi-objective optimization methods are used. Therefore, a multi-layer hierarchical constraint method is proposed by coupling principal component analysis (PCA) dimensionality reduction and e-constraint method to translate the orig-inal high-dimensional problem into a bi-objective problem. This paper selects the main design objectives by conducting PCA to the preliminary solution of original problem with consideration of the priority of design objectives. According to the e-constraint method, the design model is estab-lished by treating the two top-ranking design goals as objective and others as variable constraints. A series of bi-objective Pareto curves will be obtained by changing the variable constraints, and the favorable solution can be obtained by analyzing Pareto curve spectrum. This method is applied to the rotor airfoil design and makes great improvement in aerodynamic performance. It is shown that the method is convenient and efficient, beyond which, it facilitates decision-making of the high-dimensional multi-objective engineering problem.     

A dimension reduced INS/VNS integrated navigation method for planetary rovers

Inertial navigation system/visual navigation system (INS/VNS) integrated navigation is a commonly used autonomous navigation method for planetary rovers. Since visual measurements are related to the previous and current state vectors (position and attitude) of planetary rovers, the performance of the Kalman filter (KF) will be challenged by the time-correlation problem. A state augmentation method, which augments the previous state value to the state vector, is commonly used when dealing with this problem. However, the augmenting of state dimensions will result in an increase in computation load. In this paper, a state dimension reduced INS/VNS integrated nav-igation method based on coordinates of feature points is presented that utilizes the information obtained through INS/VNS integrated navigation at a previous moment to overcome the time rel-evance problem and reduce the dimensions of the state vector. Equations of extended Kalman filter (EKF) are used to demonstrate the equivalence of calculated results between the proposed method and traditional state augmented methods. Results of simulation and experimentation indicate that this method has less computational load but similar accuracy when compared with traditional methods.     

一种鲁棒的概率核主成分分析模型

大数据时代面临的数据维数越来越高,对数据降维处理越发显得重要。经典的主成分分析模型已被证明是一种有效的数据降维方法。但它在处理非线性、存在噪声和异常点的数据时存在效果较差的问题。对此,文章提出了一种鲁棒概率核主成分分析模型。该模型将核方法与基于高斯隐变量模型的极大似然框架相结合,用多元 t分布作为先验分布,以同时解决主成分分析在这 3个方面的弊端。提出混合鲁棒概率核主成分分析模型,使其可直接用于对混合的非线性数据进行降维和聚类分析。在不同数据集上进行的实验结果表明,与标准的混合概率核主成分分析模型相比,文中模型在数据聚类方面有更高的准确率。     

三浮陀螺伺服测试误差系数估计方法

为了更好地解决工程实际中三浮陀螺极轴伺服测试时误差系数估计问题,采用了Kalman滤波和递推最小二乘的方法.试验结果证明,Kalman滤波方法能够有效地估计出极轴伺服测试时的陀螺误差系数.用统计检验的方法分析了该模型以及各系数的显著性,结果显示对Dvz和Dzz的估计是显著的.     

基于嵌套网格的CHN-T1标模数值模拟

为响应第一届航空CFD可信度研讨会(AeCW-1),对CHN-T1标模翼身-尾翼组合体构型采用两种RANS求解器进行了基于结构化嵌套网格的网格收敛性研究和抖振特性计算,并与对接网格结果进行了对比分析。参考AeCW-1网格生成指南自主研发了一族以约3.3倍规模增长的稀-中等-密-特密嵌套网格系列。相比于分区点对接网格,融合了贴体网格和笛卡尔网格优势的嵌套网格从根本上降低了网格生成难度,单块网格拓扑形式更为合理且正交性较好,同时能够有效地平衡近场和远场的网格量。对于跨音速运输机构型,同等规模下嵌套网格的物面网格密度较对接网格更大,能够对激波和分离等复杂流动进行更理想的预测。对比计算过程中,自研求解器OFS3D表现出了较高的嵌套网格计算效率和可靠性,而NASA CFL3D求解器的嵌套网格计算能力有待进一步挖掘和验证。计算还发现,不同湍流模型得到的表面压力分布、分离区大小以及最大升力系数存在差别,而风洞模型支撑和机翼静气弹变形对飞行器力矩特性预测影响较大。     

航空发动机空气系统和热分析的耦合计算与试验验证

针对航空发动机空气系统设计和热分析计算分开进行且不考虑发动机部件对空气系统换热影响的特点,结合热分析计算实际,通过计算空气与热端部件之间的热量交换,建立了空气系统和热分析的耦合计算方法,并通过试验予以了验证。计算结果和试验结果的对比表明,耦合与非耦合计算的腔室压力基本相同,但耦合计算的腔室温度更接近试验结果,耦合计算相比于非耦合计算与试验的温度误差减小9.7K,耦合计算方法有利于减小空气系统温度计算误差。     

Design and analysis of a truss deployable antenna mechanism based on a 3UU-3URU unit

Space deployable structures with large calibers, high accuracy, and large folding ratios are indispensable equipment in the aerospace field. Given that the single-DOF 3RR-3RRR deployable unit cannot be fully folded, this study proposes a 3UU-3URU deployable unit with two kinds of DOF: folding movement and orientation adjustment. First, based on the G-K formula, the DOF of the 3UU-3URU unit is analyzed. Then, the 3UU-3URU unit is used to construct a deployable truss antenna with a curved surface, and the DOF of the whole deployable antenna containing multiple 3UU-3URU units is calculated. The structural design of a deployable antenna with two loops is carried out with specific parameters and geometric relations. Next, a DOF simulation of a basic combination unit composed of three 3UU-3URU units is performed. Finally, a prototype of the basic combination unit is manufactured, and the DOF of the mechanism is experimentally verified.     

空间电动力绳系电流峰值点变化规律研究

为研究电流峰值点在几种影响因素下的变化规律,建立一种能够捕捉绳系电子发射与收集自洽平衡过程的新算法——电路空间耦合算法。为验证该方法的计算精度,以1.35kW霍尔推力器为等离子体源,在真空舱内开展绳系的电荷收集试验,在电路参数方面,计算精度约为12.8%,在场参数方面,计算精度约为3.6%。在此基础上,针对不同偏置电压、绳系长度以及绳系直径,对绳系的绳上电流分布、电势分布以及空间电势分布等参数进行数值计算。结果显示:电动力绳系的电流峰值点会随着偏置电压升高、绳系长度增加及绳系直径增大而发生比例上的向阳极端漂移,揭示了电子轨道运动限制的机制在各类壁面电荷输运机制中占优,导致电流峰值点漂移的产生。     

机匣处理作用下高负荷轴流压气机转/静子匹配设计研究

为了探索机匣处理作用下转/静子的轴向匹配方法以进一步提高压气机级的失速裕度,研究了静子的叶型安装角及"弯"、"掠"规律对压气机性能的影响,针对机匣处理与优化静子的组合结构进行了非定常数值模拟,阐述了该结构的扩稳机理以及压气机新的失速机制。研究结果表明,在机匣处理作用下,静子成为压气机失速的触发因素,通过对静子叶型安装角及"弯"、"掠"规律的优化均可进一步提高压气机级的失速裕度,其中改变静子"弯"型对压气机级失速裕度的改善最大。组合应用机匣处理与尖部反弯根部正弯静子后,压气机效率基本不变,失速裕度提升了80.2%,较单独使用机匣处理提升30.9%。在该组合结构作用下,压气机的失速由静子触发,静子叶根吸力面在激波作用下发生附面层分离,且与轮毂表面附面层相互作用形成角区涡,接近失速边界时,静子叶根形成"前缘溢流,尾缘反流"现象,造成静子通道的大范围堵塞,诱发压气机失速。压气机级的扩稳应充分考虑机匣处理的影响,对静子进行优化设计。     

反推力装置运动学与动力学仿真

为了研究叶栅式反推力装置各部件在工作过程中的运动学与动力学特性,根据机构运动原理对反推力装置进行简化并建立了运动学与动力学数学模型。以滑动整流罩位移与阻流门所受气动负荷为输入进行运动学与动力学仿真,得到了反推力装置各部件的位移、速度及受力特性曲线,并对比分析了在不同尺寸参数下各部件特征点的运动轨迹和反推力装置负载力变化。结果表明:运动学及动力学仿真结果与工程实际相符;反推力装置机构参数选择不合理时,各设计点会发生干涉现象并导致机构无法运动;机构参数变化对负载力最大值影响尤为突出,在阻流门AC段长度值增大6%,阻流门CB段长度值减小9%的情况下,负载力正向最大值将增大19.53%,负向最大值增大12.67%。研究方法及研究结果可为反推力装置运动学及动力学分析,以及为反推力装置机构优化设计提供参考。