长矩形盒零件超塑性胀形工艺加载规律的优化

本文通过对长矩形盒零件的力学解析，得到了优化加载规律的数学表达形式。按此规律进行气压胀形，与恒压胀形实验结果相比，能有效地提高成形极限，并使厚度分布情况有明显的改善。     

交会对接载人飞船返回舱结构优化设计

为减轻飞船返回舱结构重量、使结构形式更为合理,对返回舱主要部件进行了结构优化设计。在不降低结构可靠性、满足与其他设备接口匹配性等4项优化原则的基础上,合理选取优化对象,确定了优化目的和约束条件,并以前端框、滚动发动机舱和贮箱隔舱3个主要部件为例分别进行阐述。通过优化设计,3个主要部件的结构重量减轻了0.25～10kg,...     

薄壁内、外半管冲压成形工艺参数模拟优化设计

针对内、外半管的结构特点,分析计算冲压成形主要工艺参数及毛坯尺寸,运用有限元分析软件ANSYS/LS-DYNA,对内、外半管的成形过程进行了模拟。研究了不同压边力及不同冲压速度对零件拉深成形的影响,分析了零件的成形工艺及其起皱缺陷,优化了毛坯形状,避免了成形过程中的缺陷,获得了理想的毛坯形状和工艺参数。     

平面交叉口混合交通流建模与仿真

在混合交通条件下，交通参与者成分复杂，各种交通方式速度各异，交通冲突频繁。特别是在交叉口机动车与非机动车相互干扰，带来了安全、效率、污染等多方面问题。本文首先介绍我国混合交通流的特点，然后对自行车个体微观行为进行定性的描述分析。通过对实际信号交叉口的调查研究，和对机动车流率与非机动车到达与释放规律的模型建立与定量计算。分析总结出平面交叉口机非干扰的一般规律和冲突避让原则。根据实测数据，结合视频处理和统计软件的使用通过计算直行与左转非机动车换算系数，提出了改进的机动车延误时间模型，并通过使用VISSIM3．6进行微观仿真验证了模型的有效性。     

Optimization of entry-vehicle shapes during conceptual design

During the conceptual design of a re-entry vehicle, the vehicle shape and geometry can be varied and its impact on performance can be evaluated. In this study, the shape optimization of two classes of vehicles has been studied: a capsule and a winged vehicle. Their aerodynamic characteristics were analyzed using local-inclination methods, automatically selected per vehicle segment. Entry trajectories down to Mach 3 were calculated assuming trimmed conditions. For the winged vehicle, which has both a body flap and elevons, a guidance algorithm to track a reference heat-rate was used. Multi-objective particle swarm optimization was used to optimize the shape using objectives related to mass, volume and range. The optimizations show a large variation in vehicle performance over the explored parameter space. Areas of very strong non-linearity are observed in the direct neighborhood of the two-dimensional Pareto fronts. This indicates the need for robust exploration of the influence of vehicle shapes on system performance during engineering trade-offs, which are performed during conceptual design. A number of important aspects of the influence of vehicle behavior on the Pareto fronts are observed and discussed. There is a nearly complete convergence to narrow-wing solutions for the winged vehicle. Also, it is found that imposing pitch-stability for the winged vehicle at all angles of attack results in vehicle shapes which require upward control surface deflections during the majority of the entry.     

应用模糊变权的启发式搜索进行飞行轨迹优化

回顾了军机轨迹优化问题的提出及研究历史，介绍了几种主要方法的特点，特别是启发式搜索算法应用于飞行轨迹优化问题时存在的主要问题。提出为了得到较好的近优路径而采取的模糊变权处理方法。通过计算不同加权下解的情况，说明模糊变权方法是使加权随具体情况作相应调整的有效手段，为提高飞行路径规划系统的有效性开辟了一个新思路。     

Improved NSGA-II Multi-objective Genetic Algorithm Based on Hybridization-encouraged Mechanism

To improve performances of multi-objective optimization algorithms, such as convergence and diversity, a hybridization- encouraged mechanism is proposed and realized in elitist nondominated sorting genetic algorithm （NSGA-Ⅱ）. This mechanism uses the normalized distance to evaluate the difference among genes in a population. Three possible modes of crossover operators--＂Max Distance＂, ＂Min-Max Distance＂, and ＂Neighboring-Max＂--are suggested and analyzed. The mode of ＂Neighboring-Max＂, which not only takes advantage of hybridization but also improves the distribution of the population near Pareto optimal front, is chosen and used in NSGA-Ⅱ on the basis of hybridization-encouraged mechanism （short for HEM-based NSGA-Ⅱ）. To prove the HEM-based algorithm, several problems are studied by using standard NSGA-Ⅱ and the presented method. Different evaluation criteria are also used to judge these algorithms in terms of distribution of solutions, convergence, diversity, and quality of solutions. The numerical results indicate that the application of hybridization-encouraged mechanism could effectively improve the performances of genetic algorithm. Finally, as an example in engineering practices, the presented method is used to design a longitudinal flight control system, which demonstrates the obtainability of a reasonable and correct Pareto front.     

一种高效的基于可靠性的多学科设计优化方法(英文)

Design for modem engineering system is becoming multidisciplinary and incorporates practical uncertainties; therefore, it is necessary to synthesize reliability analysis and the multidisciplinary design optimization （MDO） techniques for the design of complex engineering system. An advanced first order second moment method-based concurrent subspace optimization approach is proposed based on the comparison and analysis of the existing multidisciplinary optimization techniques and the reliability analysis methods. It is seen through a canard configuration optimization for a three-surface transport that the proposed method is computationally efficient and practical with the least modification to the current deterministic optimization process.     

电火花加工计算机辅助工艺过程设计系统

介绍电火花计算机辅助工艺过程设计系统（ＣＡＰＰＳ），用于为一个给定目标选择最佳操作。同时，还考虑了其它的会影响ＥＤＭ加工过程的加工方法（如铣削等）。系统的输入信息是在已有的ＣＡＤ信息的基础上产生的基于ＣＡＰＰ特征的工件描述。每个特征类对应于一个特定的一般工艺规程，并由系统对其进行评价，然后基于最低成本的原则，计算出最优工艺规程。同时还介绍了一种计算工时的通用方法。     

基于hp伪谱同伦凸优化的火箭垂直回收在线轨迹规划方法

针对可重复使用运载火箭垂直回收轨迹优化问题,提出了一种带有最优终端时间估计策略的hp伪谱同伦凸优化在线轨迹规划算法。首先,考虑状态约束和过程约束的非凸性,采用无损凸化处理推力幅值约束;然后,结合同伦方法与不动点迭代思想将气动力与非凸质量约束转化为线性时变剖面,完成问题凸化;进一步基于hp flipped Radau伪谱法对问题进行离散化处理,将最优控制问题转化为参数优化问题,进而采用原-对偶内点法求解;最后,为进一步减少燃料消耗,提升经济效益,考虑最优终端时间难以在线确定的问题,结合解析推导与二次插值法,设计了最优终端时间快速估计策略。仿真结果表明所设计的轨迹优化算法最优终端时间估计速度快,收敛性能良好,具有较高的精度和计算效率,具备在线应用的潜力。