Future spacelift projections

In 1996 the NASA Advisory Council asked for a comprehensive look at future launch projections out to the year 2030 and beyond. In response to this request NASA sponsored a study at The Aerospace Corporation to develop long-range space transportation models for future commercial and government applications, and to analyze the design considerations and desired characteristics for future space transportation systems. Follow-ons to present space missions as well as a wide array of potential new space applications are considered in the study. This paper summarizes the space transportation system characteristics required to enable various classes of future missions. High reliability and the ability to achieve high flight rates per vehicle are shown to be key attributes for achieving more economical launch systems. Technical, economic and policy implications are also discussed.     

导弹随机飞行仿真的建模研究

本文研究了导弹的六自由度（６ＤＯＦ）空间运动制导系统的基本特性，建立了导弹随机飞行模块化数字仿真结构。在随机干扰作用下，应用协方差分析描述函数技术（ＣＡＤＥＴ），分析弹着点的散布，获得了较满意的结果。文中主要讲述了方波控制的导弹的有关问题，但所给方法对其它类型的导弹也是同样适用的。     

有限空间轴对称射流流场的数值模拟

本文在к－ε紊流模型下，采用罚有限元法对有限空间轴对称射流流场进行数值模拟。引用罚函数优化迎风格式和退化积分，建立有限元解法的数值矩阵，在不同截面上求得工，压力和紊流参数分布，计算结果与实验数据十分接近。本文研究结果可应用于火箭发动机的喷射设计和射流量论的研究。     

跨大气层和空间区域飞行器的液体推进剂管理

根据大气层飞行环境与机动飞行特点,以及空间飞行环境与液体推进剂特点,分析了跨大气层和空间区域飞行器的保证重力场和失重状态下均无夹气液体输送、控制液体推进剂质心位移、剩余推进剂空间排放和重复使用等液体推进剂管理技术要求。阐述了相应的关键技术,如包括无夹气输送、液体质心位移控制、失重状态下的流体动力、参数确定和结构设计等管理模式确定,以及包括模型参数确定、模型、状态模拟和验证等的管理模式试验。     

A Geosynchronous Orbit Search Strategy

Since more than 10 years there is evidence that small-size space debris is accumulating in the geosynchronous orbit (GEO), probably as the result of breakups. Two break-ups have been reported in GEO. The 1978 break-up of an EKRAN 2 satellite, SSN 10365, was identified in 1992, and in 1992 a Titan 3C Transtage, SSN 3432, break-up produced at least twenty observable pieces. Subsequently several nations performed optical surveys of the GEO region in the form of independent observation campaigns. Such surveys suffer from the fact that the field of view of optical telescopes is small compared with the total area covered by the GEO ring. As a consequence only a small volume of the orbital element-magnitude-space is covered by each individual survey. Results from these surveys are thus affected by observational biases and therefore difficult to compare. This paper describes the development of a common search strategy to overcome these limitations. The strategy optimizes the sampling for objects in orbits similar to the orbits of the known GEO population but does not exclude the detection of objects with other orbital planes. A properly designed common search strategy clearly eases the comparison of results from different groups and the extrapolation from the sparse (biased) samples to the entire GEO environment.     

Tether Satellite System Collision Study

A study was performed to determine the probability of collision with resident space objects and untrackable debris for the tether component of the Tethered Satellite System (TSS) after it broke away from the Space Shuttle orbiter (mission STS-75) in February 1996. Both an analytical and a numerical approach were used in this study, and the results obtained with these two methods were found to be in good agreement. These results show that the deployed tether is expected to have been impacted by several particles 0.1mm or larger in size. The probability of collision with objects 10cm in size or larger was on the order of 10^–3 per month. Since the severed tether reentered within one month after deployment, the collision hazard to other objects while in orbit was small. The analytical methods used in this study are useful for tether collision evaluations in general.     

离散事件动态系统的GSMP模型及扰动分析

对离散事件动态系统（ＤＥＤＳ）的仿真过程建立了包含中断事件集和驱动事件集的广义半马尔可夫过程（ＧＳＭＰ）模型，对参数的无穷小扰动所引起的系统状态转移时刻进行了扰动分析，最后，讨论了扰动分析所需要的可变换条件和样本性能函数的关系，并提出值得进一步研究的问题。     

多协议多用户GPS/GSM监控系统网关的设计与实现

在多协议、多用户GPS(Global Position System)/GSM(Global System for Mobile communications)监控系统中,网关的设计对系统的性能、可用性和可扩展性有重要作用.讨论了在网关设计中需要注意的几个关键问题:通过分析不同短消息服务器的接口协议,提出使用协议管理器实现多协议接入;给出了与用户系统的通信指令格式,并分析了地址的转换流程.最后剖析了用多线程方式和消息驱动实现这种系统的优点,并给出了一个具体实现的消息循环流程.实践证明这种设计是可靠高效的.     

离散系统仿真输出数据的统计分析

概括了分析仿真产生的数据的方法，讨论了离散系统仿真输出分析的目的以及应用统计方法的要求，对单变量情形，给出了有关估计来自终态仿真和和稳态仿真参数的技术。对多变量情形，以终态仿真为例，给出了用于分析离散系统的仿真输出的某些多变量统计技术，并提出均值向量的估计方法。     

风挡防冰表面温度场计算

在研究国内外有关资料的基础上，采用了量纲分析的方法，建立了风挡外表面温度场的计算模型。回避了对自由流与射流相互干扰这一复杂问题的研究，同时对该计算模型进行了验证，并开发了相应的计算程序。该问题的解决，填补了国内在该领域中的空白。