空乘专业大学生的人格特征与职业素质分析

采用16PF和UPI量表对176名空乘专业大学生进行测评,发现有中度以上心理障碍的人数占8．40％;焦虑值偏高的人数占20．45％;适应性和成长性偏低的人数占33．50％。该群体的职业素质不能适应现代民航空服职业发展的要求。其主要问题是：缺乏认真负责的精神、意志水平不高、对社会信任不足、感情用事、自律不足、依赖性强、缺乏独立工作和应变能力。对该专业大学生加强责任意识、培养合作精神、树立人生目标的职业素质教育显得尤为重要。     

风洞试验中风剖面的模拟及近流场特性分析

首先简单介绍了日本东京工艺大学风工程研究中心新建的开环流低速边界层风洞中风剖面模拟的试验情况.基于试验结果,采用被广泛应用的三角尖劈加上布置粗糙元的方法,成功地模拟出日本建筑学会定义的四类不同场地对应的风剖面.通过对试验数据的比较分析,就所采用的立方体粗糙元及三角尖劈对最终模拟得到的风剖面特性的影响进行了比较分析.其次,对风剖面模拟及特性判定中的几个重要问题,如三角尖劈的形状优化、风速功率谱的一致性、积分尺度的分析方法等进行了分析.最后,基于以上分析,对在边界层风洞中模拟预定的风剖面提出几点参考意见.     

求解大型对称特征值问题的迭代Chebyshev-Lanczos方法

本文研究计算大型对称矩阵极端(几个最大或最小)特征值及相应特征向量的问题,讨论了Chebyshev迭代法对Lanczos方法的应用,提出了Chebyshev-Lanczos方法。计算实践表明迭代Chebyshev-Lanczos方法比迭代Lanczos方法优越。     

一类变结构控制系统滑动模态的特征值条件

在单输入双线性常值变结构控制和比例变结构控制及一般双线性常值变结构控制系统的基础上，将系统推广到一般多输入双线性系统的比例变结构控制，引入排序截尾算子取变结构控制律与状态变量中ｍ个绝对值较大的分量成比例实现对ｎ个被控变量的控制，采用李亚普诺夫方法研究这类系统的滑动模态，得出此类系统产生稳定滑模运动的条件，并对该条件进行讨论和简化，将其表述成系统矩阵与双线性矩阵特征值之间的关系式。同时给出了一个三阶     

飞机液压能源管路系统的振动特性分析

论述了液压能源管路网络系统的建模，着重建立了液体输管路及有关元件的传递矩阵，并给出了如何用特性阻抗法对系统进行求解，最后对飞机液压能源管路系统的动态特性进行了仿真，并指出了一些重要的影响因素。     

A comprehensive study of the 2016 Mw 6.0 Italy earthquake based on high-rate (10 Hz) GPS data

The 2016 M_w 6.0 Italy earthquake is successfully recorded by the near-field 10?Hz GPS and 200?Hz Strong Motion (SM) stations, providing valuable data for this study. A comprehensive study of this earthquake is carried out based on GPS data, which contains coseismic deformations analysis, noise analysis, seismic wave picking, and magnitude determination. The noise of most GPS-derived displacement waveforms can be described as a combination of white noise, flicker noise, and random walk noise after the earthquake occurrence, and the spectral indices vary significantly for most stations, implying that the seismic signals have affected the noise characteristic of GPS-derived displacement waveforms. S-transform is employed to assess the GPS capability to detect the seismic arrival time. The SM station AMT and the GPS station AMAT are in good agreement in seismic wave picking, and the difference is only 1.2?s in the north component, suggesting that the outcome of seismic wave picking using GPS data is reliable. Then, a classic empirical formula is employed to determine the moment magnitude. A robust moment magnitude (Mw 5.90) can be estimated by the nine GPS stations with about 23.9?s. If four GPS stations near the epicenter is chosen to determine the magnitude, it only take 13.0?s to retrieve a reliable preliminary (Mw 5.82) magnitude, which is 5.4?s ahead of nine stations. In addition, Cross Wavelet Transform (XWT) is adopted to measuring the correlation and phase relationship between GPS and SM records. The result of XWT analysis indicates 10?Hz GPS is capable of capturing reliable and accurate coseismic dynamic deformations, as evidenced by the XWT-based semblance being close to 1 between GPS and SM records. The above results confirm the capability of 10?Hz GPS to capture coseismic dynamic deformations, detect seismic arrival time, and determine earthquake magnitude. Moreover, rapid magnitude determination based on 10?Hz GPS data can be regarded as an important supplement to Earthquake Early Warning (EEW).     

Grinding temperature and energy ratio coefficient in MQL grinding of high-temperature nickel-base alloy by using different vegetable oils as base oil

Vegetable oil can be used as a base oil in minimal quantity of lubrication(MQL). This study compared the performances of MQL grinding by using castor oil, soybean oil, rapeseed oil, corn oil, sunflower oil, peanut oil, and palm oil as base oils. A K-P36 numerical-control precision surface grinder was used to perform plain grinding on a workpiece material with a high-temperature nickel base alloy. A YDM–III 99 three-dimensional dynamometer was used to measure grinding force,and a clip-type thermocouple was used to determine grinding temperature. The grinding force, grinding temperature, and energy ratio coefficient of MQL grinding were compared among the seven vegetable oil types. Results revealed that(1) castor oil-based MQL grinding yields the lowest grinding force but exhibits the highest grinding temperature and energy ratio coefficient;(2) palm oil-based MQL grinding generates the second lowest grinding force but shows the lowest grinding temperature and energy ratio coefficient;(3) MQL grinding based on the five other vegetable oils produces similar grinding forces, grinding temperatures, and energy ratio coefficients, with values ranging between those of castor oil and palm oil;(4) viscosity significantly influences grinding force and grinding temperature to a greater extent than fatty acid varieties and contents in vegetable oils;(5) although more viscous vegetable oil exhibits greater lubrication and significantly lower grinding force than less viscous vegetable oil, high viscosity reduces the heat exchange capability of vegetable oil and thus yields a high grinding temperature;(6) saturated fatty acid is a more efficient lubricant than unsaturated fatty acid; and(7) a short carbon chain transfers heat more effectively than a long carbon chain. Palm oil is the optimum base oil of MQL grinding, and this base oil yields 26.98 N tangential grinding force,87.10 N normal grinding force, 119.6 °C grinding temperature, and 42.7% energy ratio coefficient.     

基于中介理论与交通特性的终端区态势评价

终端区交通态势的准确度量是制定并实施流量管理措施的重要依据之一。通过提取终端区宏观与微观的交通特性,从进离场及总量3个维度构建态势的指标描述,并进一步采用中介理论中的真值程度度量与熵权法建立了一种客观的终端区飞行区交通态势模糊综合评价方法,实现客观、准确的交通态势判别与样本间量化比较。选取国内典型繁忙终端区的实测数据,验证了评价方法与特性指标的有效性。     

柴油发动机热管理系统的高度特性

基于空中和高原环境的特点,研究了柴油发动机散热器传热性能的高度特性;进一步建立了发动机热管理系统的流动和传热模型,研究了热管理系统的高度特性;给出了基于最小功耗原则的热管理系统运行参数匹配方法.在固定系统热负荷条件下的计算结果表明:随着海拔高度的增加,在空中环境下,散热器的散热性能先上升后下降,热管理系统中冷却液和润滑油温度先下降后上升,热管理系统所需的最小功耗先减小后增加;在高原环境下,散热器的散热性能随高度增加大幅下降,热管理系统中冷却液和润滑油温度大幅上升,发动机出现过热问题,为了给发动机提供足够的散热能力,热管理系统所需要的最小功耗随着海拔高度的增加而大幅增加.      

温度对飞机燃油射流泵工作特性影响

建立了射流泵数学模型,采用数值计算方法对其工作特性进行了模拟,搭建了实验台,采用RP-3燃油,通过实验数据验证了模型的正确性.在此基础上,分别选择了RP-3和JET-A两种燃油,计算了从-40℃~40℃温度下,不同操作压力对射流泵流量比的影响.结果表明:燃油温度高于0℃时,温度对射流泵工作特性影响并不明显,随着温度的降低,射流泵性能与标准温度下（20℃）偏差越来越大,且压比越高此偏差越明显.当温度高于0℃时,采用RP-3和JET-A燃油性能相差不大,RP-3燃油性能略优于JET-A燃油,但是在低温下,RP-3燃油性能远高于JET-A燃油.因此当燃油温度较低且压比较高时,必须充分考虑温度对射流泵特性的影响.