DSP技术在智能化引信中的应用

为提高无线电定高引信性能，将高速数字信号处理器(DSP)、复杂可编程器件(CPLD)、可编程门阵列(FPGA)和直接数字频率合成(DDS)等，应用于引信的时序产生、控制和信号处理电路。在不同空域采用变换时序和发射脉冲宽度的方法，可同时保证引信的灵敏度和相对精度。特别是在超低空时，充分利用微波泄漏信号和DSP的数字信号处理功能，能使定高引信在发射脉宽相同的情况下，获得更好的定高精度和超低空特性，并具有实时适应性和智能性。     

小型固体运载器起飞段姿态控制方法研究

针对控制系统,采用侧喷流发动机和栅格舵的新型小型多级固体运载火箭开展了起飞段姿态控制方法研究。给出了在低马赫数条件下侧喷流发动机的力放大因子和栅格舵的控制力矩,建立了运载器姿态控制模型。根据侧喷流和栅格舵的特点,设计了PID控制器与智能开关控制器相结合的新型控制器,运用神经网络算法实现了开关控制器参数的在线选择。仿真结果表明,所设计的控制器满足控制精度、稳定度和鲁棒性的要求,算法简便,具有工程可实现性,以侧喷流发动机和栅格舵为执行机构的控制系统能满足运载火箭起飞段姿态控制要求,为陆基或空射小型固体运载火箭姿态控制方法提供了一种新思路。     

姿控发动机试验热流参数测量系统设计

针对姿控发动机试验热流参数测试需求,在分析热流测量机理的基础上,提出了一种基于DT800的高性价比热流参数测试方案。着重论述了系统组成及工作原理、热流传感器安装工艺、数据记录仪选型、软件设计方法、数据处理方法、系统校准方法及系统调试工作。经多次试车验证:系统操作简便,性能稳定,测量数据完整可靠。     

对空间目标成像的伴随小卫星系统设计

对空间目标（神舟七号飞船）动态成像的伴随卫星系统的有关技术条 件和参数进行了分析和设计。设计双焦距光学系统适应大纵深范围成像,利用偏置动量稳定 减小释放后初始姿态扰动度,配合章动特点扩大观测视场,采用姿态导引律实现对观测 目标 的姿态指向跟踪,并给出满足清晰观测的相机参数设计。该卫星系统设计成功应用于神舟七 号载人飞行任务,并成功完成了首次对飞船在轨运行的全景照相观测,在轨试验结果表明伴 星系统各项技术条件和参数的设计是合理的,可以很好的完成对目标的清晰成像。
     

星敏感器光轴测量的锥面误差模型及其应用

星敏感器是卫星高精度姿态测量系统中的重要器件,根据其测量可以建立不同形式的星敏感器测量模型,准确分析测量模型中测量误差的特性是保证卫星姿态确定精度的重要条件。本文针对广泛采用的星敏感器光轴矢量测量方程,从几何角度出发,结合实际情况,提出了一种新颖的星敏感器光轴测量的锥面误差模型。在两个锥面参数分别服从一定的概率分布的条件下,对测量误差特性进行了深入分析,确定出新的测量误差协方差矩阵。上述研究能够在不增加算法计算量的前提下,从新的角度,更为直观地建立了星敏感器光轴矢量测量模型。最后在仿真实验中,将新的锥面误差测量模型应用于基于扩展卡尔曼滤波（EKF）的姿态确定方法中,结果表明了利用该测量模型进行姿态确定的有效性。     

基于模糊卡尔曼滤波的内阻尼姿态算法研究

在系统机动性不强的情况下，传统的平台内阻尼算法将系统本身的速度信息通过阻尼网络加到系统中，达到提高姿态角精度的目的。将这种平台内阻尼的思想引入到捷联惯性航姿系统中，在系统加速度较小的情况下，利用加速度计的输出估计系统姿态角，通过卡尔曼滤波的形式补偿系统姿态误差。由于加速度的大小直接影响滤波器精度，本文设计了模糊自适应卡尔曼滤波算法，根据三轴加速度计的输出调整内阻尼量测误差方差阵，从而避免了滤波器的发散。仿真和实验验证，内阻尼算法可明显抑制舒勒周期振荡和傅科周期振荡，避免了系统姿态漂移，有效提高了捷联惯性航姿系统的精度。     

Efficient schedulability analysis for mixed-criticality systems under deadline-based scheduling

Safety-critical avionics systems which become more complex and tend to integrate multiple functionalities with different levels of criticality for better cost and power efficiency are subject to certifications at various levels of rigorousness. In order to simultaneously guarantee temporal constraints at all different levels of assurance mandated by different criticalities, novel scheduling techniques are in need. In this paper, a mixed-criticality sporadic task model with multiple virtual deadlines is built and a certification-cognizant dynamic scheduling approach referred as earliest virtual-deadline first with mixed-criticality（EVDF-MC） is considered, which exploits different relative deadlines of tasks in different criticality modes. As for the corresponding schedulability analysis problem, a sufficient and efficient schedulability test is proposed on the basis of demand-bound functions derived in the mixed-criticality scenario. In addition, a modified simulated annealing（MSA）-based heuristic approach is established for virtual deadlines assignment. Experiments performing simulations with randomly generated tasks indicate that the proposed approach is computationally efficient and competes well against the existing approaches.     

Impact of DORIS ground antennas environment on their radio signal quality

Among the factors which may disrupt the DORIS measurements quality, the ground antennas environment is of high importance. For a set of 15 selected DORIS beacon, the differences between the effective and theoretical power received on-board the satellites (SPOT-5 and Envisat) have been analyzed in terms of spatial direction around the antenna. Such antenna maps have also been established regarding the Doppler residuals of the least-square precise orbit adjustment. Thanks to 360° views from the antennas and aerial views of the sites, the impact of the signal obstructions (trees, roofs, antennas …) on power attenuation and Doppler residuals is discussed. Depending on the nature of the obstructed object, the attenuation level can reach more than 5 dB, and the residual RMS of the orbit adjustment may be doubled from the nominal value, reaching 1 mm/s locally. The nature of the ground at the foot of the antennas has been correlated to DORIS signal quality at high elevation: reflections on flat surfaces (e.g. roofs) affect the signal more significantly than reflections on natural ground (e.g. soil). In particular, a modeling of the multipath phenomenon affecting Fairbanks site has been established and fits remarkably with the observations. Finally, an evaluation of the direct impact of obstructing objects on the orbit has also been performed. The example of a scaffolding at Kauai site displays a few millimeters error in the along-track position of the satellite.     

New improved orbit solutions for the ERS-1 and ERS-2 satellites

Improved orbit solutions of the European Remote Sensing Satellites ERS-1 and ERS-2 have been computed in the ITRF2005 terrestrial reference frame using the recent models based mainly on IERS Conventions 2003. These solutions cover the periods 3 August 1991 to 8 July 1996 for ERS-1, and 3 May 1995 to 4 July 2003 for ERS-2. For each satellite, the final orbit solution is based on a combination of three separate orbit solutions independently computed at the Delft Institute of Earth Observation and Space Systems (DEOS) of the Delft University of Technology (The Netherlands), the Navigation Support Office of the European Space Operations Centre (ESOC, Germany) and the Helmholtz Centre Potsdam GFZ German Research Centre for Geosciences (Germany) using three different software packages for precise orbit determination, but using the same models in the same terrestrial reference frame within the European Space Agency (ESA) project ‘Reprocessing of Altimeter Products for ERS (REAPER)’. Validation using radar altimeter data indicates that the new combined orbits of ERS-1 and ERS-2 computed by us are significantly more accurate, approaching the 2–3 cm level in radial direction, than previously available orbit solutions.     

Inner Attitude Integration Algorithm Based on Fault Detection for Strapdown Inertial Attitude and Heading Reference System

This article proposes a new inner attitude integration algorithm to improve attitude accuracy of the strapdown inertial attitude and heading reference system(SIAHRS), which, by means of a Kalman filter, integrates the calculated attitude from the accelerometers in inertial measuring unit(IMU), called damping attitudes, with those from the conventional IMU. As vehicle's acceleration could produce damping attitude errors, the horizontal outputs from accelerometers are firstly used to judge the vehicle's motion so as to determine whether the damping attitudes could be reasonably applied. This article also analyzes the limitation of this approach. Furthermore, it suggests a residual chi-square test to judge the validity of damping attitude measurement in real time, and accordingly puts forward proper information fusion strategy. Finally, the effectiveness of the proposed algorithm is proved through the experiments on a real system in dynamic and static states.