基于多核并行计算的超燃冲压发动机一维模型实时性研究

在发动机控制系统设计中,为了缩短设计周期、降低研发成本,需要建立面向控制的、较为精确的、实时性高的超燃冲压发动机性能计算模型,以保证模型精度、提高计算速度为研究目标,基于多核高性能计算仿真平台,开展了面向控制的超燃冲压发动机一维模型实时性优化工作。运用简化计算流程、改进C语言程序、开拓缓存区等方法有效提高了一维模型计算速度。创新性地尝试了计算流体力学并行化方法,对隔离段和燃烧室一维模型进行结构分解。计算网格平衡分配至多个中央处理器,并借助核间数据通讯实现多核并行计算。与串行模型计算结果对比,七核并行计算模型性能参数偏差不超过0.1%,全工况仿真时间小于30ms,计算耗时较优化前缩短了75%以上。实时性优化后的多核并行模型计算精度高、速度快、收敛性好,可以作为超燃冲压发动机控制系统设计和半实物仿真验证平台。     

实时数据驱动的生产线状态监控与效能评估技术研究

数字化车间的建设是航天产品制造企业实现智能制造的关键环节,为了实现车间的自主决策和自组织生产,设备互联、自动感知、虚拟监控以及实时分析等技术已经在工业界得到了广泛的重视。结合我国航天领域首个数字化车间建设项目,利用虚拟现实(VR)技术与车间信息通信技术(ICT),研发车间现场实时数据的采集与管理、生产线效能评估建模、人机交互式三维/二维集成可视化等功能模块。通过与其他信息系统如MES等进行数据集成,构建基于实时数据驱动的生产线运行状态监控平台,实现透明化生产,提高生产运营管理水平。     

基于虚拟无线电技术的航天测控系统设计

为了适应未来航天测控系统的发展趋势,提出了VRTCS（虚拟无线电测控系统）硬件平台和软件系统的基本结构。以通用高性能计算机作为系统的硬件平台,采用分层结构模型设计系统体系结构,使得航天测控系统具备更好的通用性和灵活性。阐述了VRTCS的基本概念和总体结构,对系统各组成部分的功能、组成和用途进行了分析;对测控系统中构件进行分层设计,开发原型软件实现测控系统的核心应用;以统一载波测控系统为模型,通过测控信号接入试验,验证了VRTCS的可行性。     

靶场实时测控软件系统现状与发展趋势

实时测控软件系统是航天测控系统的信息处理中心,在航天任务中担负着实时信息处理、设备数字引导、指挥显示和安全控制等任务。随着计算机与通信技术的飞速发展,实时测控软件系统向信息融合、分布处理、高可靠性和逼真的多媒体显示等方向发展。本文介绍了实时测控软件在航天任务中的地位厦作用,详细阐明了实时测控软件系统的发展历程、系统组成、功能特点和未来的发展趋势。     

Data storage and real time observations at the Mexican Array Radio Telescope

The tracking of large-scale interplanetary (IP) disturbances traveling from the Sun to the Earth is a key issue in space weather studies. The Mexican Array Radio Telescope (MEXART) applies the Interplanetary Scintillation (IPS) technique to detect these solar wind disturbances and it will participate in a global warning network of space weather forecasting. We describe the data storage and computational processes carried out to manage the instrument’s real time data. These procedures are important for the MEXART calibration, operation and the scientific data reduction.     

Network based real-time precise point positioning

Network based real-time precise point positioning system includes two stages, i.e. real-time estimation of satellite clocks based on a reference network and real-time precise point positioning thereafter. In this paper, a satellite- and epoch-differenced approach, adopted from what is introduced by Han et al. (2001), is presented for the determination of satellite clocks and for the precise point positioning. One important refinement of our approach is the implementation of the robust clock estimation. A prototype software system is developed, and data from the European Reference Frame Permanent Network on September 19, 2009 is used to evaluate the approach. Results show that our approach is 3 times and 90 times faster than the epoch-difference approach and the zero-difference approach, respectively, which demonstrates a significant improvement in the computation efficiency. The RMS of the estimated clocks is at the level of 0.1 ns (3 cm) compared to the IGS final clocks. The clocks estimates are then applied to the precise point positioning in both kinematic and static mode. In static mode, the 2-h estimated coordinates have a mean accuracy of 3.08, 5.79, 6.32 cm in the North, East and Up directions. In kinematic mode, the mean kinematic coordinates accuracy is of 4.63, 5.82, 9.20 cm.     

保证速率的AFDX交换机实时调度算法

针对AFDX(Avionics Full Duplex Switched Ethernet)网络关键技术——交换机实时调度算法,提出一种保证速率的优先级实时调度算法(PRTRG,Priority Real Time sched-uling algorithm based on Rate-Guaranteed),并运用网络演算理论分析了此调度算法的实时性.在AFDX网络典型配置下,与(FIFO,First In First Out)结果进行分析对比,证明PRTRG算法有效地减少了高优先级数据的端到端延迟上界,同时保证了低优先级数据端到端延迟的确定性,并且阻止了数据流拥塞的扩散,在交换机内部实现了流量隔离.     

椭圆轨道卫星编队燃料最优机动实时算法

文章针对椭圆轨道编队卫星最优燃料机动的实时计算问题进行研究。利用LGL伪谱法对问题进行快速求解。由于最优燃料控制为非连续控制,如直接采用伪谱法则只有当离散点数目很大时,才能实现较高精度的编队机动控制,而这会影响算法的实时计算效率。为了克服这方面的不足,文章提出了一种时间尺度变换策略,并结合模型预测的滚动优化方法,设计了一种编队实时机动控制算法。该算法在兼顾解的全局最优性的同时改善了解的局部精确性,最后通过数值仿真验证了所设计算法的有效性。     

A compact, light-weight high data-rate antenna system for remote-sensing orbiters and space exploration

Upcoming space missions utilizing hyperspectral or other high-resolution sensors will generate a vast amount of data in orbit. The average communication duration between a spacecraft in low Earth orbit (LEO) to a dedicated ground station is short and in addition, due to the high amount of data to be transferred at link times, a high-performance communication system on board of the satellite is indispensable.A solution that provides longer acquisition times with the ground station is to employ a high data-rate inter-satellite link to a geostationary relay satellite, which requires a flat, compact, steerable, light-weight yet robust antenna. Such an antenna system (antenna module plus pointing module) was developed for S-Band at the Institute of Astronautics (Technische Universität München), in cooperation with German space companies, research institutes and the German Aerospace Center (DLR). Its successful operation via the geostationary relay satellite Artemis was demonstrated in cooperation with ESA in 2007.This paper describes the evaluation of an antenna system in the Ka-Band, as a successor to be developed in the next two years for high data rates and the various applications of such an antenna system.     

利用GPS载波相位实时测定动态飞行器姿态

本文阐述了利用GPS载波相位信号进行实时飞行器姿态测定的基本思想,建立了整个系统实时确定载体姿态的数学模型;给出了动态整周模糊单差的求解过程,阐明了其物理意义．