基于ESO的DGVSCMG双框架伺服系统不匹配扰动抑制

针对双框架变速率控制力矩陀螺（DGVSCMG）两种工作模式下内、外框架系统存在的不匹配干扰抑制问题,提出一种基于扩张状态观测器与状态反馈的扰动抑制方法。在对飞轮工作模式和陀螺工作模式下内、外框架系统的干扰进行建模和分析的基础上,针对其不匹配干扰设计了扩张状态观测器,通过坐标变换减小框架系统扰动对不匹配通道的影响,并结合状态反馈控制设计了复合控制器,同时对全局系统稳定性进行了分析。对框架系统进行的仿真结果验证了所提复合控制方法的有效性。实验结果表明,所提出的控制方法能有效减小耦合力矩对内外框架角速率带来的影响,在飞轮模式下使得内外框架的角速率跳动量分别降低了85%和78%,且在陀螺模式下使外框架角速率跳动量降低了75%。     

曲锥前体/三维内转进气道一体化设计与分析

对圆锥流场在不同攻角条件下的气动特征进行分析,以流线追踪技术为基础,发展了一种曲锥前体/三维内转进气道一体化设计方法,获得了三个几何参数对一体化方案外形和性能的影响规律。研究发现,三维内转进气道侧壁外扩角对进气道流量捕获系数影响明显,而捕获形状圆心角对进气道的影响主要表现在几何特征上。此外,进气道流量捕获系数随外压缩段总长度的增大而减小。基于对捕获形状的研究,设计了一种曲锥前体/三维内转进气道,并通过数值模拟对该方案进行研究。结果表明:在设计点来流马赫数为6.0时,该方案进气道流量捕获系数能够达到0.93,且具有0.61的总压恢复系数;在非设计点来流马赫数为5.0时,流量捕获系数能够保持在0.86,总压恢复系数为0.77。      

A step deformation method for superplasticity improvement of coarse-grained Ti–15V–3Cr-3Sn-3Al

Ti–15V–3Cr–3Sn–3Al(Ti–15–3), a kind of metastable beta titanium which has high specific strength and good cold-formability, is highlighted for applications in the aerospace manufacture industry. However, the technique for improving its formability at elevated temperatures is still a challenge at present. In this work, a step deformation method is proposed for superplasticity improvement of coarse grained Ti–15–3 plates at temperatures around its beta transus. The effects of the strain rate and the strain at the first stage on the superplasticity are investigated. The results show an increase of the strain rate sensitivity and a decrease of the flow stress under the step deformation mode compared to those obtained under constant strain rates at 780℃. The maximum strain to failure obtained in the step mode is 93% higher than that deformed in the constant strain rate mode. Strain rates, strains at the first stage, and temperatures have influences on the superplasticity improvement. The deformation mechanism is concluded as subgrain formation accommodated by grain boundary sliding rate-controlled by dislocation climb. The improved m value in the step deformation is accounted to the extra dislocation density produced during the strain rate reduction.     

流动应力计算对铝合金板材充液热成形性能影响

为研究流动应力计算对铝合金板材充液热成形性能的影响,进行了板材热态胀形试验,得到了不同直径的胀形高度-压力曲线。结合三坐标测量仪测得的胀形零件轮廓数据,拟合出了最小二乘圆（LSCF）半径,发现在高径比（h/a）范围（0.18 < h/a≤0.68）内,对应的曲率半径与圆形半径之间的圆形度误差为5%。为获取更为精确的应力-应变曲线,通过对现有曲率半径和厚度理论模型进行比较,结合流动应力计算,发现Hill及Panknin曲率半径模型的平均值及Kruglov-Hill厚度模型最符合试验数据。利用组合模型计算胀形试验所得到的胀形高度-压力曲线,得到了不同温度、不同压力率下的应力-应变曲线。结果表明,210℃时方向异性（轧制方向及垂直方向）对铝合金7075-O胀形件曲率半径的影响很小;同时,压力率可影响其应力-应变曲线。      

大气噪声条件下VLF／LF通信系统仿真

影响甚低频／低频（VLF／LF）通信效果的主要因素是雷电引起的大气噪声,其发生具有随机性,理论分析比较困难。文章利用噪声特征经典分析模型,采用其低通等效形式在Simulnk仿真平台下建立了仿真模型,并对大气噪声条件下的甚低频／低频（VLF／LF）通信系统误码性能进行了仿真研究。     

方位多波束星载SAR系统的模糊特性研究

文章在介绍方位多波束合成孔径雷达（SAR,Synthetic Aperture Radar）系统的基本原理的基础上,深入分析了方位多波束SAR系统模糊信号的来源。从系统总体角度给出了方位多波束SAR系统距离模糊的一种度量方法及计算公式,并给出了仿真计算实例。文章的分析结果对高分辨宽测绘带SAR系统设计具有一定的参考价值。     

A fatigue damage-cumulative model in peridynamics

While the present structural integrity evaluation method is based on the philosophy of assumed similitude, Fatigue and Damage Tolerance (F&DT) evaluations for next generation of air-vehicles require high-fidelity physical models within cyberspace. To serve the needs of F&DT evaluation in digital twin paradigm, a fatigue damage-cumulative model within peridynamic framework is proposed in this paper. Based on the concept of fatigue element block and damage accumulation law in form of Coffin-Manson relationship, the proposed model applies to both fatigue crack initiation and fatigue crack growth; fatigue crack growth rates under constant-amplitude and simple variable-amplitude block loading cases can be well predicted for three common structural materials without inputs of Paris law parameters. Additionally, the proposed model can also be easily extended to a probabilistic version; for verification, multiple-site-damage problems are simulated and the statistic nature of fatigue process in experiments can be well captured. In the end, main features of the proposed model are summarized, and distinctions from the other models are discussed. There may be a potential for the peridynamic damage-cumulative model proposed in this work to numerically predict fatigue problems in digital twin paradigm for future generations of aerospace vehicles.     

Neck-spinning quality analysis and optimization of process parameters for plunger components: Simulation and experimental study

The plunger component is a key part of the plunger pump in the aircraft hydraulic system. Neck-spinning process is commonly used to fabricate plunger components, of which the quality of the spinning process significantly affects the performance of plunger pumps. One of the bottlenecks faced by the industry in the spinning process is to choose a suitable neck-spinning process so as to ensure the quality of plunger components. It is necessary to propose a reliable method to optimize the process parameters which affect the neck-spinning quality of plunger components. In this study, a calculable finite element analysis (FEA) model is established to simulate the three-roller neck-spinning process of the plunger component, which includes six typical slipper structures, two roller structures, and two spinning parameters. The FEA model is then validated by comparing the simulated spinning forces with the corresponding experimental results. The influence of the process conditions on the neck-spinning quality is investigated. And the orthogonal simulation results are analyzed by a combination of range method and fuzzy mathematical analysis method to recommend a reasonable slipper structure, roller structure and neck-spinning parameters. This study provides a promising method to improve the manufacturing quality of the typical plunger components.     

高速远紫外光子计数成像读出电路设计

远紫外光子计数成像探测技术通过探测微弱的单光子信息,记录每个单光子位置,在一定时间累积之后达到总体成像的目的.单光子的计数率限制着信息的获取,在分析影响计数率因素的基础上,需要设计前端模拟电路对探测器信号进行放大和整形,具体实现采用A225芯片作为前置放大器,并设计相应的整形电路.仿真和实验结果表明,电路设计合理,计数率可达到200kHz.