An Integer Precise Point Positioning technique for sea surface observations using a GPS buoy

GPS data dedicated to sea surface observation are usually processed using differential techniques. Unfortunately, the precision of resulting kinematic positions is baseline-length dependent. So, high precision sea surface observations using differential GPS techniques are limited to coasts, lakes, and rivers. Recent improvements in GPS satellite products (orbits, clocks, and phase biases) make phase ambiguity fixing at the zero difference level achievable and opens up the observation of the sea surface without geographical constraints. This paper recalls the concept of the Integer Precise Point Positioning technique and discusses the precision of GPS buoy positioning. A sequential version of the GINS software has been implemented to achieve single epoch GPS positioning. We used 1 Hz data from a two week GPS campaign conducted in the Kerguelen Islands. A GPS buoy has been moored close to a radar gauge and 90 m away from a permanent GPS station. This infrastructure offers the opportunity to compare both kinematic Integer Precise Point Positioning and classical differential GPS positioning techniques to in situ radar gauge data. We found that Precise Point Positioning results are not significantly biased with respect to radar gauge data and that horizontal time series are consistent with differential processing at the sub-centimetre precision level. Nevertheless, standard deviations of height time series with respect to radar gauge data are typically [4–5] cm. The dominant driver for noise at this level is attributed to errors in tropospheric estimates which propagate into position solutions.     

预先危险分析方法在航管二次雷达站运行管理中的应用

本文对预先危险分析方法作了简单介绍。重点研究了PHA在航管二次雷达站运行管理中的应用，找出了广汉机场航管二次雷达站运行管理中存在的危险源，采用定性和定量的方法从危险的后果严重程度和发生可能性两方面对风险进行了分析，提出了控制危险性的有效措施。     

Time and phase synchronization using clutter observations in airborne distributed coherent aperture radars

Airborne Distributed Coherent Aperture Radar(ADCAR) is one of the most promising next-generation radars to significantly improve target detection and discrimination abilities. However, time and phase synchronization among unit radars should be done before an ADCAR is intended to cohere on a potential target. To address this problem, a time and phase synchronization technique using clutter observations is proposed in this paper. Clutter returns from different azimuths and elevations on the surfac...     

Using altimetry and seafloor pressure data to estimate vertical deformation offshore: Vanuatu case study

Measuring ground deformation underwater is essential for understanding Earth processes at many scales. One important example is subduction zones, which can generate devastating earthquakes and tsunamis, and where the most important deformation signal related to plate locking is usually offshore. We present an improved method for making offshore vertical deformation measurements, that involve combining tide gauge and altimetry data. We present data from two offshore sites located on either side of the plate interface at the New Hebrides subduction zone, where the Australian plate subducts beneath the North Fiji basin. These two sites have been equipped with pressure gauges since 1999, to extend an on-land GPS network across the plate interface. The pressure series measured at both sites show that Wusi Bank, located on the over-riding plate, subsides by 11 ± 4 mm/yr with respect to Sabine Bank, which is located on the down-going plate. By combining water depths derived from the on-bottom pressure data with sea surface heights derived from altimetry data, we determine variations of seafloor heights in a global reference frame. Using altimetry data from TOPEX/Poseidon, Jason-1, Jason-2 and Envisat missions, we find that the vertical motion at Sabine Bank is close to zero and that Wusi Bank subsides by at least 3 mm/yr and probably at most 11 mm/yr.     

模糊控制在雷达天线控制系统中的应用

针对目前在雷达天线控制系统中采用数字PID控制存在超调量大、响应时间长等不足，分析比较了数字PID控制和模糊控制的不同特点，介绍了模糊控制在雷达天线控制系统中的应用。     

基于ATE技术的末制导雷达“天线对零”实现方案

在叙述“天线对零”过程重要性的基础上,介绍了基于ATE技术的末制导雷达“天线对零”自动过程的实现方案。该自动“天线对零”方案已经应用在“末制导雷达通用检测系统”中,保证了系统的高精度自动化测量。     

武装直升飞机雷达散射截面的估算方法

讨论了在预告不知道武装直升飞机详细外形数据的情况下，根据三视图及少量外形数据，对其外形进行拟合，对雷达散射截面进行估算的方法，并对一武装直升飞机进行了理论计算和实验测试，结果吻合较好。     

Design of an end-to-end demonstration mission of a Formation-Flying Synthetic Aperture Radar (FF-SAR) based on microsatellites

The paper focuses on space system design aspects related to an end-to-end demonstration mission, aiming at showing the feasibility of a Formation Flying Synthetic Aperture Radar (FF-SAR) with microsatellite class platforms (~100 kg). Trajectory design approaches that can fulfil payload requirements are addressed to enable selected FF-SAR applications. The exploitation of these applications relies on suitable combinations of FF-SAR techniques like Signal-to-Noise Ratio (SNR) enhancement, High-Resolution Wide Swath (HRWS) SAR imaging, and Coherence Resolution Enhancement (CRE). In this framework, a cluster of 3 micro-satellites, working in X-band, flying in a Low Earth Orbit (LEO) close-formation, has been designed as a candidate end-to-end system demonstration mission. One satellite embarks a Transmitting-Receiving (Tx/Rx) radar, i.e. it is a monostatic SAR. The other two satellites are Receiving-only platforms. Critical design aspects related to spacecraft subsystems and formation-flying analysis are addressed to confirm the technical feasibility of the spaceborne distributed system implementing the FF-SAR principle.     

机载巡航导弹外形隐身改进的电磁散射影响

隐身技术是提高巡航导弹突防能力的重要技术手段,为分析外形隐身对巡航导弹电磁散射特性影响,建立了隐身、常规巡航导弹电磁模型,基于物理光学法和RCS减缩值,研究了外形隐身RCS曲线分布影响、频率响应特性、俯仰角响应特性。结果表明,外形隐身可大幅降低前后向散射特性,改变RCS散射波峰位置,使前后向曲线向内收敛;频率增加,前向均值和减缩值分别在-32 dBsm、25 dB左右振荡变化,其他角域RCS均值降低而减缩值增加;俯仰角变化较小时不影响散射特性,各角域RCS均值和减缩值呈振荡趋势,前向减缩值约为35 dB左右,后向俯仰角0度时最大。     

理想缺陷目标电磁散射特性提取新方法

武器装备表面理想缺陷对缺陷目标的散射特性有重要影响。从电磁场叠加理论出发,以对应实际缺陷目标和载体为基础,提出一种理想缺陷目标电磁散射提取的计算新方法,采用该方法结合暗室测试和MLFMA数值计算,研究单列、多列缝隙和台阶理想缺陷的散射特性,验证该方法的正确性和实效性。结果表明:新方法计算过程简单高效,具有与MLFMA算法一致的计算精度,可快速实现单列、多列理想缺陷目标的电磁散射特性提取;理想缺陷在镜面散射区域外影响显著,理想台阶的影响相对明显,多列理想缺陷散射具有较强的耦合性,表现为更多的散射波峰,这是各列理想电磁缺陷的叠加效果。