矩形截面高超声速进气道气动设计及实验验证

首先对矩形截面高超声速进气道设计方法进行了研究,给出了设计流程,并据此设计了矩形截面高超声速进气道.接着对其进行了三维数值仿真研究,给出了进气道性能参数随来流马赫数、飞行迎角及飞行高度的变化规律.最后设计了实验模型,并进行了高焓风洞实验验证.数值模拟及高焓风洞实验验证均表明:本文采用的设计方法可达到预期的设计效果,设计的进气道达到了相应的设计要求,本文采用的数值仿真方法可以较为准确地模拟高超声速进气道内的流动,数值模拟结果可信.     

运动激波与气泡串相互作用的多介质数值模拟

通过对激波和流体界面相互作用而诱导的大变形界面演化的数值模拟,验证了Level set 方法精确模拟多个流体界面的有效性.采用间断有限元Galerkin方法求解欧拉方程得到流场解,采用5阶WENO格式求解Level set方程追踪多流体界面,界面附近的边界条件由虚拟流体方法处理.对运动激波和两个气泡相互作用过程进行了数值模拟,得到了不同时刻的压力和密度等值线分布,并分析了计算域中两个气泡同是氦气泡,以及一个是氦气泡,一个是R22气泡情况下的计算结果.计算结果表明:利用多界面Level set方程可高质量地捕捉多个流体界面,处理3种多介质流场数值模拟问题.     

基于无限元方法的直升机外部噪声仿真分析

为了准确地模拟直升机飞行中的外部噪声,建立了耦合计算流体力学/计算气动声学(Computational fluid dynamics/Computational aeroacoustics,CFD/CAA)的直升机机外噪声预测方法.气动计算采用CFD方法模拟旋翼、尾桨气动力以及气动干扰;噪声计算采用声学无限元方法,考虑...     

基于自适应模拟退火遗传算法的月球软着陆轨道优化

 将自适应遗传算法与模拟退火算法相结合,形成一种自适应模拟退火遗传算法。该算法不但具备了自适应遗传算法的强大全局搜索能力,也拥有模拟退火算法的强大局部搜索能力。针对月球软着陆轨道优化的特点,利用一种新的参数化方法将轨道优化问题转换为非线性规划问题,并应用提出的自适应模拟退火遗传算法进行优化。数值结果表明：该算法的收敛速度快,优化精度高,且避免了初值敏感、病态梯度和局部收敛等问题,能够搜索到全局最优轨道。     

基于传递函数方法的局部覆盖环状CLD圆柱壳动力学分析

 采用传递函数方法对局部覆盖环状约束层阻尼（CLD）圆柱壳进行了动力学分析。基于Donnell薄壳简化,由Hamilton原理导出了局部覆盖CLD圆柱壳的运动方程和边界条件,通过Laplace变换并引入状态向量后,建立了系统的状态空间方程,利用传递函数方法求解方程得到了系统的固有频率、〖JP2〗损耗因子和频响曲线。算例分析结果验证了该方法的有效性和精确性,且更适于处理黏弹性材料具有频变特性的问题。讨论了CLD覆盖率和黏弹层厚度对系统固有频率和损耗因子的影响,为局部覆盖CLD圆柱壳的优化设计奠定了基础。     

Periodic Error Compensation for Quartz MEMS Gyroscope Drift of INS

In order to improve the navigation accuracy of an inertial navigation system （INS）, composed of quartz gyroscopes, the existing real-time compensation methods for periodic errors in quartz gyroscope drift and the periodic error term relationship between sampled original data and smoothed data are reviewed. On the base of the results, a new compensation method called using former period characteristics to compensate latter smoothness data （UFCL for short） method is proposed considering the INS working characteristics. This new method uses the original data without smoothing to work out an error conversion formula at the INS initial alignment time and then compensate the smoothed data errors by way of the formula at the navigation time. Both theoretical analysis and experimental results demonstrate that this method is able to cut down on computational time and raise the accuracy which makes it a better real-time compensation approach for periodic error terms of quartz micro electronic mechanical system （MEMS） gyroscope＇s zero drift.     

模型烧蚀对尾迹电子特性影响的计算和实验研究

 基于气动物理研究的需要,针对高焓风洞的来流特点,采用计算和实验相结合的方法研究聚丙烯烧蚀对尾迹电子密度的影响。结果表明：计算结果可以有效模拟实验状态,电子密度的模拟精度有很大提高,误差在一个量级内;聚丙烯烧蚀可以降低尾迹的电子密度,但幅度不大,在2倍左右,其与选择模型材料的催化特性降低幅度相当;对电弧风洞的成功改进和非稀薄流静电探针诊断技术的应用,是尾迹电子密度测试的前提保障。     

New Cutting Force Modeling Approach for Flat End Mill

A new mechanistic cutting force model for flat end milling using the instantaneous cutting force coefficients is proposed. An in-depth analysis shows that the total cutting forces can be separated into two terms: a nominal component independent of the runout and a perturbation component induced by the runout. The instantaneous value of the nominal component is used to calibrate the cutting force coefficients. With the help of the perturbation component and the cutting force coefficients obtained above, the cutter runout is identified. Based on simulation and experimental results, the validity of the identification approach is demonstrated. The advantage of the proposed method lies in that the calibration performed with data of one cutting test under a specific regime can be applied for a great range of cutting conditions.     

Revisiting the space-time gradient method: A time-clocking perspective,high order difference time discretization and comparison with the harmonic balance method

This paper revisits the Space-Time Gradient(STG) method which was developed for efficient analysis of unsteady flows due to rotor–stator interaction and presents the method from an alternative time-clocking perspective. The STG method requires reordering of blade passages according to their relative clocking positions with respect to blades of an adjacent blade row. As the space-clocking is linked to an equivalent time-clocking, the passage reordering can be performed according to the alternativ...     

A spanwise loss model for axial compressor stator based on machine learning

In the early stage of aircraft engine design, the through-flow method is an important tool for designers. The accuracy of the through-flow method depends heavily on the accuracy of the loss model. However, most existing models cannot(or cannot well) provide the spanwise loss distribution. To construct an effective spanwise loss model, both turbomachinery knowledge and machine learning skills were used in this paper. A large number of numerical simulations were carried out to build a database con...