Design method with controllable velocity direction at throat for inward-turning inlets

In the design of a hypersonic inward-turning inlet by applying the traditional basic flowfield, a reflected shock-wave is formed in the isolator due to the continuous reflection of the cowlreflected shock wave in the basic flow-field, which interacts with the boundary layer to produce a considerable influence on the performance of the inlet. Here, a basic flow-field design method that can control the velocity direction at the throat section is developed, and numerical simulations are conducted to demonstrate the effectiveness of this method. The method presented in this paper can achieve the absorption of the reflected waves at the shoulder of the basic flow-field by adjusting the variation law of the center radius in the basic flow-field, and a smooth transition between the compression surface and the isolator can also be produced. The Mach number and total pressure recovery coefficient of the inlet designed according to this method are 3.00 and 0.657, respectively, at design point(the incoming flow Mach number Ma1= 6.0). The results show that with this method, the inlet can efficiently weaken both the reflection of the shock wave and the interaction between the boundary layer and the reflected shock waves, which improves the aerodynamic performance of the inlet.     

空间太阳能电站姿态运动-结构振动耦合建模与分析

针对多旋转关节空间太阳能电站构型，利用基于能量等效原理的连续体等效方法将其等效为柔性梁模型，并考虑重力梯度影响，建立了姿态运动与结构振动的耦合动力学模型；结合Runge-Kutta 法和Newmark法的优点，提出了适用于求解姿态运动与结构振动耦合动力学方程的改进算法，相比于经典Runge-Kutta 法大幅提高了效率；利用改进算法得到了不同参数下的动力学响应。在此基础上，推导了结构振动量级随结构尺寸的六次方量级增加的规律，仿真结果表明尺寸过大引发不稳定现象；分析了姿态运动和重力梯度对结构振动频率和振幅的影响；发现了姿态运动周期受结构柔性影响而增大的现象，这种现象在低轨以及大初始姿态角下影响更为明显。     

Multiphysics simulation method of Lamb wavepropagation with piezoelectric transducers under load condition

Lamb Wave(LW) simulation under time-varying conditions is an effective and low cost way to study the problem of the low reliability of the structural health monitoring methods based on the LW and Piezoelectric Transducer(PT). In this paper, a multiphysics simulation method of the LW propagation with the PTs under load condition is proposed. With this method, two key mechanisms of the load influence on the LW propagation are considered and coupled with each other. The first mechanism is the acoustoelastic effect which is the main reason of the LW velocity change. The second key mechanism is the load influence on piezoelectric materials, which results in a change of the amplitude. Based on the computational platform of the COMSOL Multiphysics, a multiphysics simulation model of the LW propagation with the PTs under load condition is established. The simulation model includes two physical phenomena. The first one is called solid mechanics, which is used to simulate the acoustoelastic effect being combined with the hyperelastic material properties of the structure in which the LW propagates. The second one is called electromechanical coupling, which considers the simulation of the piezoelectric effect of the PTs for the LW excitation and sensing. To simulate the load influence on piezoelectric materials, a non-linear numerical model of the relationship between the load and the piezoelectric coefficient d31 is established based on an experiment of the load influence on the LW. The simulation results under uniaxial tensile load condition are obtained and are compared with the data obtained from the experiment. It shows that the variations of the phase velocity and amplitude of the LW obtained from the simulation model match the experimental results well.     

北京平原地区VS30估算模型适用性研究

本文使用基于钻孔测井数据的3类模型,即常速度外推模型、速度梯度模型、双深度参数外推模型,通过对北京地区460个深度超过30m的钻孔剪切波速资料进行分析,详细探究了V_(S30)估算模型在本研究区的适用性。研究结果表明双深度参数外推模型在估算V_(S30)上准确度很高,其不需要大量的数据进行回归分析,且不具有区域独立性,可以为全球包括北京地区场地类别划分提供依据,进而在震害快速评估中用于确定场地影响,是一种值得推广的估算模型。     

基于薄膜热电堆的新型高温瞬态热流密度传感器的研制

目前针对国内薄膜瞬态热流传感器一致性较差、制备工艺不成熟等问题，提出了一种基于光刻工艺和离子束溅射镀膜工艺的制备方法，200对T型金属薄膜热电偶沉积在10mm×10mm的水冷块上，测量1μm的氧化铝热阻层温差，从而得到瞬态热流密度值。对新型高温瞬态热流密度传感器进行比对法标定，一致性误差为0.211%，即工艺的一致性约为99.79%。实验表明，研制的新型高温瞬态热流密度传感器的一致性好,制备工艺具备良好重复性和可移植性，能够满足高温瞬态热流检测需要，为热流传感器的推广应用及标准化、批量化生产提供了良好的技术支撑。     

推力作用下变质量柔性自旋飞行器稳定性分析

针对变质量柔性自旋飞行器推力作用下稳定性问题，以Timoshenko梁为模型，考虑陀螺效应和剪切效应，基于有限元法建立系统振动方程，分析质量变化、推力作用和自旋转速对系统振动的影响，采用自适应Newmark法求解系统的振动响应。结果表明：质量和推力能够改变固有频率、进动频率和临界转速；受质量变化影响，自旋转速与临界转速相等时，飞行器发生短暂共振，共振响应峰值最大时刻与此重合时刻相比稍有延迟。     

A closed-form nonlinear model for spatial Timoshenko beam flexure hinge with circular cross-section

Beam flexure hinges can achieve accurate motion and force control through the elastic deformation. This paper presents a nonlinear model for uniform and circular cross-section spatial beam flexure hinges which are commonly employed in compliant parallel mechanisms. The proposed beam model takes shear deformations into consideration and hence is applicable to both slender and thick beam flexure hinges. Starting from the first principles, the nonlinear strain measure is derived using beam kinematics and expressed in terms of translational displacements and rotational angles. Second-order approximation is employed in order to make the nonlinear strain within acceptable accuracy. The natural boundary conditions and nonlinear governing equations are derived in terms of rotational Euler angles and subsequently solved for combined end loads. The resulting end load-displacement model, which is compact and closed-form, is proved to be accurate for both slender and thick beam flexure using nonlinear finite element analysis. This beam model can provide designers with more design insight of the spatial beam flexure and thus will benefit the structural design and optimization of compliant manipulators.     

基于时域有限差分法平面光波的一维吸收边界条件

吸收边界条件的选取在使用时域有限差分法分析设计衍射光学元件的过程中有着举足轻重的作用。文章从麦克斯韦方程组出发,推导出了一维吸收边界条件的解析解及该吸收边界对TEM波的反射系数,用数值模拟验证了在激励源分别处于讨论区域右边、中间,且在TEM波传播的同时一直存在的情况下,一维Mur一阶吸收边界条件和波延迟法的优质吸收效果。对两种边界条件的计算误差进行了对比和分析,结果表明Neum ann边界条件波形稳定早,数值精度高,Mur一阶边界条件波形稳定稍迟,有一定误差,但吸收效果很好。     

钢筋混凝土梁抗弯刚度公式修正及研究

使用过程中梁的刚度会发生退化,从而影响其使用性能.根据钢筋混凝土的基本性能,分析了各种损伤对刚度退化的影响因素,认为裂缝对刚度的影响最为直接也最为明显.进而从数学角度、物理意义角度对现行规范刚度公式进行分析,并提取出裂缝对刚度退化的影响参数--受拉钢筋应变不均匀系数φ.选择裂缝平均间距和裂缝开展高度作为裂缝统计参数,通过ANSYS有限元软件模拟和分析,建立了关于裂缝统计参数的抗弯刚度修正公式.