空间相机摆扫成像立体定位精度仿真分析

为了验证空间相机摆扫成像立体定位的可行性,考虑成像比例尺变化、摆扫角测量精度、摆扫角稳定度和摆扫角速度等影响因素,建立了以总体设计中影响定位精度的各指标为参数的空间相机摆扫成像几何模型,推导了基于误差传播理论的定位精度计算方法,并对平面定位精度和高程精度进行了仿真,提出了摆扫成像方式条件下提高定位精度的有效措施。结果表明,在成像幅宽较大时,单线阵摆扫成像线阵长度较小情况下和双线阵推扫成像线阵长度较大情况下,可达到相近的定位精度,提高摆扫角测量精度、摆扫角稳定度及时间同步精度,可提高平面定位精度。摆扫成像立体定位精度仿真方法适用于大幅宽成像遥感卫星定位精度指标分配。     

Experimental characteristics of a two-electrode plasma synthetic jet actuator array in serial

Plasma Synthetic Jet (PSJ) actuators have shown wide and promising application prospects in high-speed flow control, due to their advantages including high exhaust speed, wide frequency band, rapid response, and non-moving components. Although previous studies on PSJ actuators are abundant, most of them have focused on the performance of a single actuator. However, in practice, an actuator array is very necessary for large-scale aerodynamic actuation on account of the small affected area of a single PSJ. In this paper, the characteristics of a two-electrode plasma synthetic jet actuator array in serial are investigated experimentally. Compared to a parallel actuator array, the serial actuator array requires simpler power supply design and is much easier to realize. High-speed photography of the discharge evolution, voltage-current measurement, and shadowgraphy visualization are used in the investigation. Experimental results show that, for the serial actuator array, weak discharges happen firstly between energized and suspending electrodes, and then a strong pulse arc discharge is triggered. The breakdown voltage in serial is irrelevant to such factors as the number of actuators, the maximum or minimum gap in serial, the connection sequence, etc. It is mainly determined by the sum of gaps. For serial actuators with the same anode-to-cathode spacing, the energy deposition is the same, and the jet is synchronous and similar. Because of the entrainment and merging of adjacent jet vortices, the jet front speed of an aligned synchronous jet array increases as the orifice distance decreases. To achieve the highest jet front velocity, the orifice of the actuator has an optimal diameter.     

基于JEC-FDTD算法的等离子体天线雷达散射截面计算

采用电流密度卷积FDTD算法(JEC-FDTD)计算了等离子体天线的散射特性, 分析了等离子体天线处于工作状态时等离子体参数(密度、碰撞频率)及天线外部约束腔体对天线雷达散射截面(RCS)的影响. 数值结果表明, 等离子体天线的RCS会随等离子体密度的减小及碰撞频率的增大而减小. 而约束腔体只有在高频段时才会对等离子体天线的RCS值产生较大的影响. 因此, 在不影响天线性能的情况下, 可以根据信号频率调节等离子体参数、选取合适的腔体材料以达到增强等离子体天线隐身性能的目的.      

电子称防作弊方法和监管系统的研究

目前我国在用的电子秤存在严重的作弊现象,监管部门对电子秤的监管难度很大,虽有许多防作弊方法研究,但收效甚微。本文从电子秤防作弊的总体架构、监管流程设计等方面提出一个电子秤防作弊的整体解决方案,通过软硬件配合的方法,实现电子秤的全生命周期管理,提出需解决的几个关键问题,以期研究人员做进一步的研究。     

基于激光测距的飞艇净重在线计算方法研究

通过对三维建模软件CATIA中的飞艇副气囊模型进行切片分割,获得了不同副气囊高度下的对应体积值,使用最小二乘法建立了副气囊中心点高度与副气囊体积的三次曲线拟合公式,采用相位式激光测距仪对副气囊中心高度测量,使用该公式可以估算出副气囊的实时体积大小,从而推算飞艇净重大小,掌握飞艇的压力高度和起降能力。使用某次飞行试验对副气囊高度测量的数据计算出的飞艇净重值,与多次地面称重数据一致性较好,验证了使用激光测距仪对大型飞艇净重进行在线评估的可行性,并使用该方法对某飞艇某次飞行试验过程中的净重进行了分析,对飞艇的压力高度进行了核算。     

力约束管材自由胀形试验研究与材料性能测试

相较于单向拉伸试验,通过管材胀形试验(TBT,Tube Bulging Test)获得的材料性能参数能够更准确地反映材料在高压流体作用下的塑性成形性能,不同的管端边界将会严重影响管材胀形试验的测试结果.针对国际上现有试验方法和设备存在的不足,研制出了一套约束边界清晰、加载精确的管材自由胀形试验系统.在管材测试过程中,基于位移随动力主动加载的控制策略和比例伺服油缸,实现实时的轴向力、轴向位移和内压力的精确加载.端部约束的测试管材通过特殊设计的工装保证了其轴向自由滑动.实时内压力和胀形管材顶点处材料的壁厚和胀形高度信息通过超高压压力传感器、超声测厚仪和磁致伸缩位移传感器采集,进而基于Swift材料本构模型和采集到的数据拟合出材料应力应变曲线和材料性能参数.试验结果表明,管材两端侧推力与内压力对管材内腔端面的作用力和管材轴向自由对称收缩的平衡条件始终处于动态稳定中,试验设备能够准确获得实时胀形高度、顶点厚度、轴向收缩长度和内压力的信息,能够为材料性能测试和工艺设计提供可信的材料参数.      

Flight safety oriented ice shape modulation using distributed plasma actuator units

Ice accretion on the wings seriously threatens the flight safety of an aircraft. From the perspectives of ensuring flight safety and saving power consumption, the ice shape modulation method using distributed plasma is proposed. Distributed plasma actuator units are designed to modulate the spanwise continuous ice at the leading edge into periodically segmented ice pieces, forming a wavy leading edge. Both airfoil and scaled aircraft model, with continuous and modulated ice, are experimentally investigated and simulated. Compared with the continuous ice, ice shape modulation can significantly improve the aerodynamic performance, flight control characteristics and flight safety. This method can save about half electric power, which is very beneficial for application.     

Suppressing unsteady motion of shock wave by high-frequency plasma synthetic jet

Three Plasma Synthetic Jet Actuators (PSJA) under the high-frequency actuation are used to control the Shock Wave Boundary Layer Interaction (SWBLI), a high-speed schlieren image processing method based on spatial Fourier transform as well as snapshot proper orthogonal decomposition were used to study the control effect of high-frequency plasma synthetic jet on low-frequency unsteadiness of SWBLI. The analysis of the base flow shows that the separated shock wave actually has both large- and small-amplitude vibrations at low frequency. And the results revealed that the PSJA with an operating frequency of 2 kHz has the ability to reduce the energy of low-frequency component of shock wave motion, indicating that the 2 kHz actuation can effectively suppress low-frequency unsteadiness of the separated wave. Compared with the actuation frequency of 2 kHz, the energy of low-frequency component of the shock wave is enhanced under the 8 kHz actuation, which aggravates the low-frequency unsteady motion of the shock wave. It is likely that the actuation frequency is too high, thus the intensity of the precursor shock wave induced by PSJA becomes weaker. Additionally, as the 4 kHz actuation is applied, the pulsation of the separation region was enhanced, it is speculated that the actuation frequency is coupled with the oscillation frequency of the separation region.     

CS结构下的DVE规模扩展方法

针对分布式虚拟环境下的多服务器结构,将规模扩展问题转化为多节点与多服务器的最优分配问题,并提出了节点划分方案的评估方程.评估方程综合考虑系统负载、系统延迟,以达到对分配方案的有效评估.根据分布式虚拟环境实际应用的特点,将节点划分分为预分配和实时调节两个步骤.预分配通过密度优先策略和贪婪自适应搜索算法实现对预分配节点快速、有效地划分,利用评估方程对评估结果进行修订;实时调节严格限制节点分配的条件,达到实时分配的目的.相比于传统方法,很好的处理了分配的实时性和完备性之间的矛盾,具有较高的实用价值.通过实验比较,证明该方法的有效性,并得出结论.