大气行星波对LF和VLF无线电波传播的影响

本文采用最大熵谱估计方法,对1985-1987年三个冬天,在东半球(20°S—65°N、13°E—141°E)白天观测的LF和VLF电波相位、幅度、卫星观测的Ly-α射线通量及高纬上空的行星波活动等大量资料,进行了熵谱分析。观测及分析结果表明:(1)LF和VLF电波的相位具有2—2.2天、3—4天、6—12天、12—20天、20—32天周期范围的行星尺度扰动.Ly-α射线辐射通量主要具有20—32天周期范围内的波动.(2)发现在中纬地区冬天观测的LF电波幅度大的扰动与高纬60°N上空观测的行星波H_1的变化规律非常一致. 波形结构的主要峰和谷几乎完全对应,仅在时间上前者约滞后3—4天.计算给出两者的相关系数在0.65—0.85之间.根据观测事实和谱分析结果对比,作者认为LF和VLF电波相位、幅度周期在20天以上的扰动主要受太阳Ly-α辐射通量变化的控制.冬天其周期在2—20天范围内的扰动,主要受来自对流层和下平流层中激发的大气行星波的影响.     

柔性多层冲击空间碎片防护结构设计与试验

充气展开密封结构是未来空间站以及大型空间居住舱的理想构建形式,其外蒙皮由气密层、增强层、微流星体和空间碎片防护层、辐射保护层以及热控层组成。为了既满足对空间碎片的防护,又满足折叠、收纳以及展开的要求,空间碎片防护层需要采用多层冲击防护结构设计。基于多层冲击防护结构,采用国产的玄武岩纤维材料和芳纶织物的特性参数,根据弹道极限方程设定了柔性空间碎片防护层的设计参数,并通过高速撞击试验对根据设计参数生产的试验件进行了试验验证,试验结果与柔性多层冲击防护结构的弹道极限方程吻合较好。     

针栓式推力室冷却特性试验研究

针栓式发动机具有推力调节简单、声学燃烧稳定性好和成本低廉等一系列优点,但目前对针栓式推力室的冷却特性掌握还不够深入,研制过程中曾多次出现因推力室冷却组织不好而烧蚀的问题。采用针栓式推力室试验件,对身部的冷却特性进行了深入研究,结果表明:推力室圆柱段前端的温度较低,无需采用专门的冷却措施;末端内侧气壁温度会达到约1650℃,局部存在明显的烧蚀现象,必须采取有效的热防护措施;下游冷却液膜量的变化对圆柱段的冷却特性影响较小。     

Simulating planetary wave propagation to the upper atmosphere during stratospheric warming events at different mountain wave scenarios

Parameterization schemes of atmospheric normal modes (NMs) and orographic gravity waves (OGWs) have been implemented into the mechanistic Middle and Upper Atmosphere Model (MUAM) simulating atmospheric general circulation. Based on the 12-members ensemble of runs with the MUAM, a composite of the stratospheric warming (SW) has been constructed using the UK Met Office data as the lower boundary conditions. The simulation results show that OGW amplitudes increase at altitudes above 30 km in the Northern Hemisphere after the SW event. At altitudes of about 50 km, OGWs have largest amplitudes over North American and European mountain systems before and during the composite SW, and over Himalayas after the SW. Simulations demonstrate substantial (up to 50–70%) variations of amplitudes of stationary planetary waves (PWs) during and after the SW in the mesosphere-lower thermosphere of the Northern Hemisphere. Westward travelling NMs have amplitude maxima not only in the Northern, but also in the Southern Hemisphere, where these modes have waveguides in the middle and upper atmosphere. Simulated variations of PW and NM amplitudes correspond to changes in the mean zonal wind, EP-fluxes and wave refractive index at different phases of the composite SW events. Inclusion of the parameterization of OGW effects leads to decreases in amplitudes (up to 15%) of almost all SPWs before and after the SW event and their increase (up to 40–60%) after the SW in the stratosphere and mesosphere at middle and high northern latitudes. It is suggested that observed changes in NM amplitudes in the Southern Hemisphere during SW could be caused by divergence of increased southward EP-flux. This EP-flux increases due to OGW drag before SW and extends into the Southern Hemisphere.     

A drilling tool design and in situ identification of planetary regolith mechanical parameters

The physical and mechanical properties as well as the heat flux of regolith are critical evidence in the study of planetary origin and evolution. Moreover, the mechanical properties of planetary regolith have great value for guiding future human planetary activities. For planetary subsurface exploration, an inchworm boring robot (IBR) has been proposed to penetrate the regolith, and the mechanical properties of the regolith are expected to be simultaneously investigated during the penetration process using the drilling tool on the IBR. This paper provides a preliminary study of an in situ method for measuring planetary regolith mechanical parameters using a drilling tool on a test bed. A conical-screw drilling tool was designed, and its drilling load characteristics were experimentally analyzed. Based on the drilling tool-regolith interaction model, two identification methods for determining the planetary regolith bearing and shearing parameters are proposed. The bearing and shearing parameters of lunar regolith simulant were successfully determined according to the pressure-sinkage tests and shear tests conducted on the test bed. The effects of the operating parameters on the identification results were also analyzed. The results indicate a feasible scheme for future planetary subsurface exploration.     

基于结构随机跳变系统的反干扰信息处理方法

为了解决在复杂的干扰对抗环境中提高信息处理的准确性问题(例如,对具有多种干扰对抗手段的机动目标的跟踪问题),基于结构随机跳变系统理论提出了一种反干扰信息处理的新方法,该方法针对干扰环境的随机剧烈变化,适时地辨识干扰环境的当前状态,并作出相应的决策来优化和利用系统的资源(例如传感器的优化重组、信息融合算法的转换等),最大限度地降低干扰对信息处理精度的影响.以有效地提高信息优化处理的精确度.在本文中就该方法的性能与其它算法做了仿真比较,其仿真结果证实了该方法的有效性.      

深空探测对航天器热控技术的推动

工程热物理学广泛应用于航天领域,一方面解决了具体航天工程问题,另一方面逐步发展成为交叉学科——空间热物理。随着我国在深空探测领域不断拓展,以深空探测器研制中的工程热物理问题为需求背景,推动着航天器热控制技术、防热技术等取得新的发展。文章在介绍深空探测器技术体系的基础上,分析了热设计、热分析、热试验、热控硬件、防热等方面的技术进步,并就深空探测领域进一步拓展对工程热物理发展的牵引进行了展望,分析了工程热物理学与航天技术间相互促进、相互推动的关系。     

High-adaption locomotion with stable robot body for planetary exploration robot carrying potential instruments on unstructured terrain

There is a strong demand for Planetary Exploration Mobile robots (PEMRs) that have the capability of the traversability, stability, efficiency and high load while tackling the specialized tasks on planet surface. In this paper, an electric parallel wheel-legged hexapod robot which has high-adaption locomotion on the unstructured terrain is presented. Also, the hybrid control framework, which enables robot to stably carry the heavy loads as well as to traverse the uneven terrain by utilizing both legged and wheeled locomotion, is also proposed. Based on this framework, robot controls the multiple DOF leg for performing high-adaption locomotion to negotiate obstacles via Gait Generator (GG). Additionally, by using Whole-Body Control (WBC) of framework, robot has the capability of flexibly accommodating the uneven terrain by Attitude Control (AC) kinematically adjusting the length of legs like an active suspension system, and by Force/torque Balance Control (FBC) equally distributing the Ground Reaction Force (GRF) to maintain a stable body. The simulation and experiment are employed to validate the proposed framework with the physical system in the planetary analog environments. Particularly, to smoothly demonstrate the performance of robot transporting heavy loads, the experiment of carrying 3-person load of about 240 kg is deployed.     

Attitude determination of planetary exploration rovers using solar panels characteristics and accelerometer

In this study, we propose a new attitude determination system, which we call Irradiance-based Attitude Determination (IRAD). IRAD employs the characteristics and geometry of solar panels. First, the sun vector is estimated using data from solar panels including current, voltage, temperature, and the normal vectors of each solar panel. Because these values are obtained using internal sensors, it is easy for rovers to provide redundancy for IRAD. The normal vectors are used to apply to various shapes of rovers. Second, using the gravity vector obtained from an accelerometer, the attitude of a rover is estimated using a three-axis attitude determination method. The effectiveness of IRAD is verified through numerical simulations and experiments that show IRAD can estimate all the attitude angles (roll, pitch, and yaw) within a few degrees of accuracy, which is adequate for planetary explorations.     

Polyhedron tracking and gravity tractor asteroid deflection

In the wake of the Chelyabinsk airburst, the defense against hazardous asteroids is becoming a topic of high interest. This work improves the gravity tractor asteroid deflection approach by tracking realistic small body shapes with tilted ion engines. An algorithm for polyhedron tracking was evaluated in a fictitious impact scenario. The simulations suggest a capability increase up to 38.2% with such improved tilting strategies. The long- and short-term effects within polyhedron tracking are illustrated. In particular, the orbital reorientation effect is influential when realistic asteroid shapes and rotations are accounted for. Also analyzed is the subject of altitude profiles, a way to tailor the gravity tractor performance, and to achieve a steering ability within the B-plane. A novel analytical solution for the classic gravity tractor is derived. It removes the simulation need for classic tractor designs to obtain comparable two body model Δv$\mathrm{\Delta }v$ figures. This paper corroborates that the asteroid shape can be exploited for maximum performance. Even a single engine tilt adjustment at the beginning of deflection operations yields more deflection than a fixed preset tilt.