Hierarchical global search for fuel-optimal impulsive transfers between lunar libration orbits

The attention to the periodic orbit in the Earth-Moon restricted three-body system continues to grow due to its special environment and locations. This research investigates the feasibility of constructing fuel-optimal single and multiple impulse transfers between unstable periodic orbits at L₁ and L₂ points. Invariant manifolds, which could provide the appropriate initial trajectories for optimization, are analyzed deeply to enable previously unknown orbit options and potentially to reduce mission cost. A global search strategy based on comparing the orbital state of the unstable and stable manifolds, incorporated with low-thrust techniques, is performed to seek a suitable matching point for maneuver application. Then the sequential quadratic programming (SQP) is adopted to further optimize the velocity increment and obtain the single/multiple impulse optimal transfers. The associated constraint gradients are derived to achieve higher accuracy and rapidity of the algorithm. To highlight the effectivity of the transfer scheme, three-dimensional low-energy transfers between different types and spatial regions of performing single and multiple impulses are explored. The total Delta-V required varies between a few meters per second and tens of meters per second, and the related flight time is about several weeks, mainly depending on the energy of periodic orbits and the invariant manifold structure. The results obtained in this paper can provide a useful reference for the selection of escape and capture site along the manifolds, maneuver magnitude and transfer time.     

Planetary landings with terrain sensing and hazard avoidance: A review

The site selection and certification processes for planetary landers equipped with hazard avoidance capability are reviewed. The prior (large-scale) ‘landability’ of the target areas determined from orbital remote sensing can be only a few tens of per cent (～40 % for Perseverance, ～80–90 % for Apollo 11 and 60–70 % for subsequent Apollo landers) because on-board sensing is able to find safe areas at smaller scales (meters to tens of meters) than the delivery ellipse which may be several to several tens of kilometers across. This contrasts with the ‘blind’ landings of unguided missions, where safe terrain occupying 95–99 % of the landing ellipse are typically sought. The particulars of Apollo 11 and Perseverance/Ingenuity are discussed, together with the similar Chang-E-3 and Tianwen-1 Moon and Mars landers, and the Hayabusa-2 and OSIRIS-REx asteroid contacts, since these missions all used on-board terrain-relative navigation to steer relative to hazards either mapped previously or detected in real-time. These missions set the context for the application of these techniques to the Dragonfly mission to Titan, which has a more austere remote sensing basis on which to select a landing site, but whose rotor propulsion allows substantial divert capability.     

An in situ laser induced breakdown spectroscope (LIBS) for Chandrayaan-2 rover: Ablation kinetics and emissivity estimations

A miniaturized in situ laser induced breakdown spectroscope-LIBS is one of the two lunar rover payloads to be flown in India’s next lunar mission Chandrayaan-2, with an objective to carry-out a precise qualitative and quantitative elemental analyses of lunar regolith at the proximity of the landing region. As per the imposed mission constraints and the executed design optimization studies, a compact and light-weight LIBS prototype model is developed at our premises. This paper mainly concerns with the estimation of theoretical aspects; especially on evaluation of elemental ablation parameters and signal-to-noise ratio (SNR) calculations for the designed instrument. Theoretical estimations and simulations yielded an incident laser power density of the order of 5 × 10¹⁰ W/cm² on the target surface at a defined lens-to-surface distance (LTSD) of 200 mm and revealed an SNR > 100 for most of the elements under consideration. This paper also addresses the impact of LTSD variation on detection capability. The estimation of plasma-temperatures was carried out utilizing the emission spectra obtained under high vacuum environments employing the LIBS laboratory model. Experimental investigations and the performed theoretical estimations asserted the successful operation of the configured LIBS instrument for in situ elemental analyses on lunar surface.     

Robotic Instrument for Grinding Rocks Into Thin Sections (GRITS)

We have developed a rock grinding and polishing mechanism for in situ planetary exploration based on abrasive disks, called Grinding Rocks Into Thin Sections (GRITS). Performance characteristics and design considerations of GRITS are presented. GRITS was developed as part of a broader effort to develop an in situ automated rock thin section (ISARTS) instrument. The objective of IS-ARTS was to develop an instrument capable of producing petrographic rock thin sections on a planetary science spacecraft. GRITS may also be useful to other planetary science missions with in situ instruments in which rock surface preparation are necessary.     

Venus observations from ENVISAT–SCIAMACHY: Measurements and modeling

This work shows the capability of observing Venus with a sensor originally designed for Earth remote sensing. SCIAMACHY (SCanning Imaging Absorption spectroMeter for Atmospheric CHartographY), onboard ENVISAT, successfully observed visible and near-infrared spectra from the Venusian atmosphere. The Venus spectra were simulated using a line-by-line radiative transfer model. The single scattering approximation was applied in order to consider the effects of an approximately 20 km-thick haze layer above the main cloud deck, which was considered as a reflecting cloud located in the upper atmosphere of the planet. CO₂ absorption lines could be distinguished in both observed and simulated spectra and a good agreement between them was also found.     

Wireless sensor networks for planetary exploration: Experimental assessment of communication and deployment

Planetary surface exploration is an appealing application of wireless sensor networks that has been investigated in recent years by the space community, including the European Space Agency. The idea is to deploy a number of self-organizing sensor nodes forming a wireless networked architecture to provide a distributed instrument for the study and exploration of a planetary body. To explore this concept, ESA has funded the research project RF Wireless for Planetary Exploration (RF-WIPE), carried out by GMV, SUPSI and UPM. The purpose of RF-WIPE was to simulate and prototype a wireless sensor network in order to assess the potential and limitations of the technology for the purposes of planetary exploration.     

太阳帆绕地球周期轨道研究

  地球同步和太阳同步卫星在各个领域有着广泛的应用。静止轨道是一种特殊的地球同步轨道,轨道资源有限。利用化学推进或电推进可以实现轨道高度不同的同步轨道,如悬挂轨道,但需要消耗较多的燃料,工程上无法承受。本文考虑利用太阳帆实现地球同步和太阳同步轨道。太阳光压力在轨道平面内沿拱线方向,选择光压力与平面的夹角使得轨道平面的旋转速率与太阳光同步。研究表明,设计合适的半长轴和偏心率可以使得轨道旋转速率与地球自转速率一致。假设太阳光与赤道平面平行,可以得到准静止轨道,太阳帆将在传统静止轨道的附近运动,星下点的经度将在一个固定值附近振动。实际上太阳光是与黄道面平行,黄道面与赤道面之间存在夹角。考虑黄赤交角的情况下,太阳帆将在一定纬度和经度范围内运动。适合于对某个区域进行长期观测任务。     

结合深空机动的多次行星借力轨道设计

行星借力技术是减小星际探测任务发射能量的有效途径,传统的行星借力模型不能保证探测器借力前后的速度矢量转角达到理想要求。为此,进行了行星借力建模,并基于该模型,推导了探测器飞出借力天体影响球的双曲线超速矢量。针对轨道设计参数的强耦合性,提出了一种全局-局部混合搜索算法,并对地球-金星-地球-火星-木星转移轨道进行了设计。仿真结果验证了轨道模型的正确性和有效性,表明该文方法可以有效地对多次行星借力轨道进行设计。     

Dynamical evolution of high area-to-mass ratio objects in Molniya orbits

For special demands, some notable orbit types have been developed by human, including the Molniya orbits, which have a relatively high eccentricity up to about 0.7, and a period of 12 h. Considering that space debris with high area-to-mass ratio (A/M) has been discovered, such objects may also exist in Molniya orbits due to spacecraft and upper stages fragmentation events. However, there are not sufficient studies of the complex dynamical phenomena of such orbits. These studies can enrich the knowledge about the long-term evolution of these orbits, be helpful to propose uncatalogued objects observation and identification, and also set the protected region as well as active debris removal. In this paper, the characteristics of 2:1 resonance of Molniya satellite orbits are studied. A large set of numerical simulations, including all the relevant perturbations, is carried out to further investigate the main characteristics, and special attention is payed to the dynamical evolution of objects with high A/M, particularly affected by the direct solar radiation pressure. The long-term dynamical evolution of orbital elements, as well as the dependency of lifetime on the A/M value, is discussed.     

Novel orbits of Mercury,Venus and Mars enabled using low-thrust propulsion

Exploration of the inner planets of the Solar System is vital to significantly enhance the understanding of the formulation of the Earth and other planets. This paper therefore considers the development of novel orbits of Mars, Mercury and Venus to enhance the opportunities for remote sensing of these planets. Continuous acceleration is used to extend the critical inclination of highly elliptical orbits at each planet and is shown to require modest thrust magnitudes. This paper also presents the extension of existing sun-synchronous orbits around Mars. However, unlike Earth and Mars, natural sun-synchronous orbits do not exist at Mercury or Venus. This research therefore also uses continuous acceleration to enable circular and elliptical sun-synchronous orbits, by ensuring that the orbit's nodal precession rate matches the planets mean orbital rate around the Sun, such that the lighting along the ground-track remains approximately constant over the mission duration. This property is useful both in terms of spacecraft design, due to the constant thermal conditions, and for comparison of images. Considerably high thrust levels are however required to enable these orbits, which are prohibitively high for orbits with inclinations around 90°. These orbits therefore require some development in electric propulsion systems before becoming feasible.