Overview of current capabilities and research and technology developments for planetary protection

The pace of scientific exploration of our solar system provides ever-increasing insights into potentially habitable environments, and associated concerns for their contamination by Earth organisms. Biological and organic-chemical contamination has been extensively considered by the COSPAR Panel on Planetary Protection (PPP) and has resulted in the internationally recognized regulations to which spacefaring nations adhere, and which have been in place for 40 years. The only successful Mars lander missions with system-level “sterilization” were the Viking landers in the 1970s. Since then different cleanliness requirements have been applied to spacecraft based on their destination, mission type, and scientific objectives. The Planetary Protection Subcommittee of the NASA Advisory Council has noted that a strategic Research & Technology Development (R&TD) roadmap would be very beneficial to encourage the timely availability of effective tools and methodologies to implement planetary protection requirements. New research avenues in planetary protection for ambitious future exploration missions can best be served by developing an over-arching program that integrates capability-driven developments with mission-driven implementation efforts. This paper analyzes the current status concerning microbial reduction and cleaning methods, recontamination control and bio-barriers, operational analysis methods, and addresses concepts for human exploration. Crosscutting research and support activities are discussed and a rationale for a Strategic Planetary Protection R&TD Roadmap is outlined. Such a roadmap for planetary protection provides a forum for strategic planning and will help to enable the next phases of solar system exploration.     

Influence of atmospheric turbulence on planetary transceiver laser ranging

In this paper we investigate the influence of atmospheric turbulence on the performance of the uplink of a planetary transceiver laser ranging system using a single photon detector. We numerically combine the influence of turbulence in the mean intensity profile variations, scintillation, beam-wander induced pointing errors and stochastic time-of-flight variations, using the Hufnagel–Valley turbulence profile to model the ground turbulence behavior. We map the intensity variations due to turbulence to variations in the probability distribution of the arrival time of the 1st photon in a laser pulse, which influences the range measurement error probability distribution. The turbulence models are applied to assess the influence on single-pass range accuracy and precision statistics, as well as the parameter estimation quality of a Phobos Laser Ranging (PLR) mission.     

The statistical treatment implemented to obtain the planetary protection bioburdens for the Mars Science Laboratory mission

NASA Planetary Protection Policy requires that Category IV missions such as those going to the surface of Mars include detailed assessment and documentation of the bioburden on the spacecraft at launch. In the prior missions to Mars, the approaches used to estimate the bioburden could easily be conservative without penalizing the project because spacecraft elements such as the descent and landing stages had relatively small surface areas and volumes. With the advent of a large spacecraft such as Mars Science Laboratory (MSL), it became necessary for a modified—still conservative but more pragmatic—statistical treatment be used to obtain the standard deviations and the bioburden densities at about the 99.9% confidence limits. This article describes both the Gaussian and Poisson statistics that were implemented to analyze the bioburden data from the MSL spacecraft prior to launch. The standard deviations were weighted by the areas sampled with each swab or wipe. Some typical cases are given and discussed.     

Application of HF Doppler measurements for the investigation of internal atmospheric waves in the ionosphere

We present results of the spectral analysis of data series of Doppler frequency shifted signals reflected from the ionosphere, using experimental data received at Kazan University, Russia. Spectra of variations with periods from 1 min to 60 days have been calculated and analyzed for different scales of periods. The power spectral density for spring and winter differs by a factor of 3–4. Local maxima of variation amplitude are detected, which are statistically significant. The periods of these amplitude increases range from 6 to 12 min for winter, and from 24 to 48 min for autumn. Properties of spectra for variations with the periods of 1–72 h have been analyzed. The maximum of variation intensity for all seasons and frequencies corresponds to the period of 24 h. Spectra of variations with periods from 3 to 60 days have been calculated. The maxima periods of power spectral density have been detected by the MUSIC method for the high spectral resolution. The detected periods correspond to planetary wave periods. Analysis of spectra for days with different level of geomagnetic activity shows that the intensity of variations for days with a high level of geomagnetic activity is higher.     

Classification of Geostationary Objects

This paper lists all geostationary and near-geostationary objects contained in ESA's DISCOS database.     

Experimental results for Titan aerobot thermo-mechanical subsystem development

This paper describes experimental results from a development program focused on maturing Titan aerobot technology in the areas of mechanical and thermal subsystems. Results from four key activities are described: first, a cryogenic balloon materials development program involving coupon and cylinder tests and culminating in the fabrication and testing of an inflated 4.6 m long prototype blimp at 93 K; second, a combined lab experiment and numerical simulation effort to assess potential problems resulting from radioisotope power source waste heat generation near an inflated blimp; third, an aerial deployment and inflation development program consisting of laboratory and helicopter drop tests on a near full scale (11 m long) prototype blimp; and fourth, a proof of concept experiment demonstrating the viability of using a mechanically steerable high gain antenna on a floating blimp to perform direct to Earth telecommunications from Titan. The paper provides details on all of these successful activities and discusses their impact on the overall effort to produce mature systems technology for future Titan aerobot missions.     

基于特征模型的Halo轨道维持控制

平动点，尤其是共线平动点轨道在未来深空探测活动中具有重要的应用价值，但由于共线平动点轨道不稳定，运行在其上的航天器在无控情况下将很快偏离标称轨道，因此在实际任务中，轨道维持必不可少。针对地月系L₂点附近的Halo轨道维持问题，首先在圆型限制性三体模型下，利用Richardson三阶近似解析解、微分修正以及打靶法获得了用于维持控制的标称轨道；然后设计了基于特征模型理论的黄金分割控制器用于速度跟踪以及PD控制器用于位置跟踪；最后分别在圆型限制性三体模型和双圆限制性四体模型下进行了仿真分析。结果表明：在两种模型下，位置和速度的跟踪精度分别优于100 m和0.003 m/s，但双圆限制性四体模型下所需总的速度增量比圆型限制性三体模型下所需总的速度增量高一个数量级。     

Some features of the day-to-day MLT wind variability in winter 2017–2018 as seen with a European/Siberian meteor radar network

We present results of wind measurements near the mesopause carried out with meteor radars (MRs) at Collm (51°N, 13°E), Obninsk (55°N, 37°E), Kazan (56°N, 49°E), Angarsk (52°N, 104°E) and Anadyr (65°N, 178°E) from October 1, 2017 till March 31, 2018. The Collm and Kazan MRs are SKiYMET radars with vertical transmission and radio echo height finding, while the other radars operate with horizontal transmission and without height finding. We paid particular attention to the meridional wind variability with periods of 4–6 days and 9–11 days. The waves with these periods are seen as spots of the wave activity in the wavelet spectra and include oscillations with different periods and different discrete zonal wavenumbers. These wave packets successively propagate as a group of waves from one site to another one in such a way that they are observed at one site and almost disappear at the previous one. The 4–6 wave group includes planetary-scale oscillations (individual spectral components) which have eastward phase velocities and mostly zonal wavenumbers 2 and 3, and the vertical wavelength exceeds 70 km at middle latitudes. The source of the oscillations is the polar jet instability. The wave group itself propagates westward, and the amplitudes of wind oscillations are approximately 5–6 m/s as obtained from the wind data averaged over the meteor zone. The 9–11 day wave set propagates westward as a group and mainly consists of spectral components which have westward phase velocity and zonal wavenumber 1. Amplitudes of these wind perturbations strongly vary from station to station and can reach, approximately, 8 m/s. The vertical wavenumber is 0.014 km⁻¹ as taken from the Kazan and 0.05 km⁻¹ according to the Collm data. We obtained a global view on the waves by using the AURA MLS geopotential data. We found a good correspondence between wave features obtained from the MR wind measurements and the MLS data. To our knowledge, such a wave propagation of planetary wave in the mesosphere/lower thermosphere (MLT) region has so far not obtained much attention.     

Numerical modeling and optimization of bundled fiber optic FTIR probes for spectroscopy of small targets

Fiber optic probes coupled to a Fourier Transform Infrared (FTIR) spectrometer allow sample analysis without the need to place the sample directly into the instrument. This is particularly attractive for spacecraft lander/rover applications where the additional mechanics, mass and cost associated with excavating and placing a small sample in a sample bay is not desirable. This paper uses numerical modeling to analyze fiber bundle array configurations and fiber numerical apertures to determine their light gathering efficiency and sample size as a function of probe-to-sample distance. The model was validated against experimental measurements for a selection of off the shelf fiber optic probes. The collection efficiency of a probe can be optimized by using a hexagonal packing method, and by using fibers with high numerical apertures. By increasing the numerical aperture of the fibers used in our model probes from 0.2 to 0.5, we were able to increase the collection efficiency of a seven fiber probe from 4.5% to 9.5%, with the peak collection efficiency corresponding to a spot size of diameter 3 mm.