A hybrid attitude controller consisting of electromagnetic torque rods and an active fluid ring

In this paper, a novel hybrid actuation system for satellite attitude stabilization is proposed along with its feasibility analysis. The system considered consists of two magnetic torque rods and one fluid ring to produce the control torque required in the direction in which magnetic torque rods cannot produce torque. A mathematical model of the system dynamics is derived first. Then a controller is developed to stabilize the attitude angles of a satellite equipped with the abovementioned set of actuators. The effect of failure of the fluid ring or a magnetic torque rod is examined as well. It is noted that the case of failure of the magnetic torque rod whose torque is along the pitch axis is the most critical, since the coupling between the roll or yaw motion and the pitch motion is quite weak. The simulation results show that the control system proposed is quite fault tolerant.     

基于浴盆曲线故障率函数的FFOP预计方法

与传统可靠性指标中假设产品的随机失效不可避免不同,无故障工作期(FFOP)内产品不会发生任何故障(即零故障)。首先阐述了FFOP的概念内涵、与平均故障间隔时间(MTBF)的区别和联系,提出了一种FFOP的预计方法。该方法假设产品的故障率函数具有浴盆曲线特征、故障发生过程为泊松过程、产品具有固定的免维修工作期。然后以一种改进的Weibull分布函数描述具有浴盆曲线函数特征产品的故障率。基于泊松过程理论,给出了FFOP的预计算法、流程和仿真验证手段。最后以某型无人机舵机为案例对研究方法的可用性进行了验证。结果表明:FFOP与免维修工作期(MFOP)、置信度水平密切相关,及时维修的产品能够保证较长的FFOP。在工程应用时,FFOP的确定应综合考虑运行维护费用进行权衡。     

光致伸缩作动器对开口球壳的主动振动控制

基于电压源模型,推导出薄膜式光致伸缩作动器应变与光强的本构关系。建立光电层合球壳系统动力学方程及模态控制方程。利用规格化后的模态控制因子对球壳子午线方向及圆周方向的薄膜与弯矩效应进行评价,不同位置下的模态控制因子为作动器布局优化提供了依据。将LQR控制算法与光源激励策略相结合,确定光电层合球壳系统的主动控制策略。进行主动振动控制仿真,得到球壳位移及控制光强响应曲线。仿真结果表明,在较低能量的控制光强下,光致伸缩作动器可实现对球壳的主动振动控制,且振动抑制效果明显。
     

Structural Nonlinear Flutter Characteristics Analysis for an Actuator-fin System with Dynamic Stiffness

The flutter characteristics of an actuator-fin system are investigated with structural nonlinearity and dynamic stiffness of the electric motor. The component mode substitution method is used to establish the nonlinear governing equations in time domain and frequency domain based on the fundamental dynamic equations of the electric motor and decelerator. The existing describing function method and a proposed iterative method are used to obtain the flutter characteristics containing preload freeplay nonlinea...     

Acceleration sensors based modal identification and active vibration control of flexible smart cantilever plate

Some flexible appendages of spacecrafts, such as solar panels, are cantilever plate structures. Thus, vibration problem is unavoidable when there is slewing maneuver or external disturbance excitation. Vibration of such cantilever plate structures includes coupled bending and torsional motion. Furthermore, the low amplitude vibration near the equilibrium point is very difficult to be quickly suppressed due to nonlinear factors of the hardware in the system, which is harmful to stability and attitude control accuracy. To solve these problems, acceleration sensor-based modal identification and active vibration control methods are presented for the first two bending and the first two torsional modes vibration of the cantilever plate. Optimal placements of three acceleration sensors and PZT patches actuators are performed to decouple the bending and torsional vibration of such cantilever plate for sensing and actuating, and identifications are achieved by experiments. A nonlinear control method is presented to suppress both high and low amplitude vibrations of flexible smart cantilever plate significantly. Experimental comparison researches are conducted by using acceleration proportional feedback and the presented nonlinear control algorithms. The experimental results demonstrate that the presented acceleration sensor-based methods can suppress the vibration of cantilever plate effectively.     

电致动聚合物致动器材料及放大结构综述

为满足航天应用的需要,本文对EAP材料研究情况和它们典型的压电致动器放大结构发展趋势进行了综述。首先比较了干湿EAP材料的特性,提出了应用中需要注意的一些问题;其次,以典型的压电致动器放大结构为例,分析了其优缺点,强调了一些新颖的概念。最后指出,为克服航天应用中EAP致动器力和行程的限制,需要根据实际应用从材料和放大结构两方面展开深入研究。     

纯模态试验中的作动器/传感器优化配置

基于有效独立法,研究了逐步消减法在纯模态试验作动器/传感器优化配置中的应用。对一给定自由度的结构系统,由系统的模态动能可得系统的F isher信息阵。在优化过程中,根据F isher信息阵可得到各自由度节点所对应的E fI值,由E fI值的大小来确定每次要删除的作动器/传感器。在逐步消减的过程中,把E fI的值表示为一个矩阵的形式,使得优化过程清晰明了,提高了优化效率。最后,通过对一个20自由度的离散悬臂梁的激振器布设进行优化,验证了本文方法的有效性。     

一种民用飞机电作动舱门集中式控制方案研究

在未来飞机多/全电化和机电综合管理的发展趋势下,舱门作动器逐渐由机电作动取代了传统的液压、机械作动。针对目前民用飞机舱门分散式独立控制杂、乱、散的局面,提出一种用于电作动舱门的集中式控制方案。对该集中式控制方案下如何实现电机的伺服控制、舱门的并行控制以及接近传感器感应距离值的修改进行设计,并搭建舱门作动系统模拟装置及电机加载试验平台,对集中式控制的架构及电机伺服控制进行试验验证。结果表明：本文提出的电作动舱门集中式控制方案是可行的,该方案能够大幅减少舱门线缆数量,降低舱门系统的复杂度,提高系统可靠性及可维护性。     

利用压电自敏感致动器的挠性结构振动主动控制实验研究

以粘贴有压电自敏感致动器的挠性梁振动主动控制为例，论述了进行挠性结构传感器／致动器及控制一体化研究的方法，文中给出了压电自敏感致动器的电路模型及自敏感感器 变测量和应变速度测量电路，推导了测量公式，以玻璃钢材料的挠性梁为实验对象，并采用自适应滤波技术来实现振动主动控制，控制系统由ＴＭＳ３２０Ｃ２５及４８６计算机组成的主从机系统来实现，实验结果表明此种控制方法是有效的。     

基于压电智能结构飞机座舱振动噪声主动控制研究

针对在某些特殊情况下飞机座盘舱振动、噪声过大的实际情况，本文对其进行了振动、噪声抑制研究。以某飞机座舱模型为研究对象，利用压电智能结构，并结合振动主动控制方法和LMS自适应滤波算法，实现了一套完整的飞机座舱模型振动、噪声主动控制系统。最后本文给出实验结果，证明了此方法对飞机座舱模型振动、噪声抑制的有效性。