SPOT-5卫星系统性能概述

概要介绍SPOT - 5卫星的主要成像传感器 ,精确定位技术及数据格式。介绍分析卫星数据的应用前景     

管理效率、技术进步与生产率增长——基于中美航空公司的比较

运用Malmquist生产率指数方法，对中美15个航空公司2000～2006年期间的全要素生产率的变化作了测算与对比。分析结果显示，2000—2006年这些公司的生产效率总体上都有所提高，中国航空公司的全要素生产率的平均增长率为4.3％，美国的平均增长率为6．1％；综合效率改善与技术进步对中美两国航空公司生产率的影响程度并不相同，美国航空公司的主要驱动因素为技术变革与创新，中国航空公司的发展动力主要为对已有技术的运用以及组织管理效率的提升。中国航空公司全要素生产率水平的提高，除继续强调综合效率的重要性之外，也要进一步加强对技术进步的重视。     

时滞系统内模控制器参数整定方法研究

针对内模原理对时滞系统控制的局限性,利用一阶泰勒级数逼近模型的时 滞部分, 推导了工业上常见的一阶时滞和二阶时滞模型的内模控制参数表达式, 结合 ITAE 指标和系统鲁棒性设计了新的目标函数, 通过对目标函数的寻优实现了内模控制 器参数的整定。仿真结果表明,该方法具有较好的动态跟踪性能、较强的抗干扰性和鲁 棒性,具有一定的工程应用价值。     

混合动力学中一种综合控制指标

本文从环境流体力学角度，结合混合动力学机理，导出了一种新混合综合控制指标。     

ADS-B监视报文参数统计及其所需性能

基于广播式自动相关监视（ADS-B）报文的位置导航不确定性指标（NUC_P）的监视质量备受关注。针对位置导航不确定性参数好、监视质量却不高的问题，深入研究广播式自动相关监视报文数据项及其与基于性能的通信与监视的相关性。在充分考虑通信导航监视相关性及全球卫星导航系统（GNSS）广域增强等因素基础上，推导、构建了监视所需性能估计模型，并给予合理简化。在测试空域利用2个具有运行资质的生产商ADS-B接收站，连续采集近2亿条ADS-B报文，统计分析报文各信息项的状态参数，并应用到所需性能估计模型评估计算这两个ADS-B站的所需监视性能。此外还将参考文献报文参数代入模型评估所需性能。结果显示，当考虑报文各信息项统计状态及具备广域增强服务支撑时，ADS-B所需监视性能参数估计值未达到99.9%要求。若缺乏广域增强服务及相关性因素等，系统所需性能与国际民航组织（ICAO）监视要求的差距则更大。     

电动式磁悬浮动量球电磁场耦合分析

本文针对电动式磁悬浮动量球(Electrodynamic suspension reaction sphere, EDSRS)的电磁场耦合进行分析，采用定子绕组的感应电动势评判耦合强度，提出了耦合强度评判指标，作为EDSRS的结构设计约束，以降低电磁场耦合的影响。首先，结合EDSRS的具体结构特点，对多定子之间的电磁场耦合问题进行分析，采用定子电磁场在另一个定子绕组中产生的感应电动势评判耦合强度。然后，对感应电动势产生规律进行分析，提出了耦合强度评判指标，并基于所提评判指标，建立了耦合约束验证流程，作为EDSRS的结构设计约束，最后，通过有限元仿真和实验验证了上述电磁场耦合分析。     

失效概率矩独立全局灵敏度分析的高效算法

失效概率矩独立全局灵敏度分析对指导可靠性优化至关重要，本文从乘法降维及Edgeworth级数展开的角度提出一种失效概率矩独立全局灵敏度指标分析的高效算法。所提算法通过Edgeworth级数展开将失效概率矩独立全局灵敏度指标的求解转化为输出无条件及条件前四阶整数矩的求解。对于输出的无条件及条件四阶矩的计算，基于乘法降维的思想，本文推导了重复利用计算输出的无条件矩的输入输出样本来计算条件矩以及外层关于输入变量一维积分的计算公式，使得仅需重复利用输出无条件前四阶矩求解产生的积分网格内的数据即可同时求得输出的前四阶条件矩以及外层关于输入变量的一维积分。所提算法大大提高了失效概率矩独立全局灵敏度的分析效率。航空发动机涡轮盘以及汽车前轴的分析结果验证了所提算法的高效性及准确性。     

L-band nighttime scintillations at the northern edge of the EIA along 95°E during the ascending half of the solar cycle 24

The characteristics of nighttime ionospheric scintillations measured at the L-band frequency of 1.575 GHz over Dibrugarh (27.5°N, 95°E, MLAT ～ 17°N, 43° dip) during the ascending half of the solar cycle 24 from 2010 to 2014 have been investigated and the results are presented in this paper. The measurement location is within or outside the zone of influence of the equatorial ionization anomaly depending on solar and geomagnetic activity. Maximum scintillation is observed in the equinoxes irrespective of solar activity with clear asymmetry between March and September. The occurrence frequency in the solstices shifts from minimum in the June solstice in low solar activity to a minimum in the December solstice in high solar activity years. A significant positive correlation of occurrence of scintillations in the June solstice with solar activity has been observed. However, earlier reports from the Indian zone (～75°E) indicate negative or no correlation of scintillation in June solstice with solar activity. Scintillations activity/occurrence in solstices indicates a clear positive correlation with Es recorded simultaneously by a collocated Ionosonde. In equinoxes, maximum scintillations occur in the pre-midnight hours while in solstices the occurrence frequency peaks just after sunset. The incidence of strong scintillations (S₄ ≥ 0.4) increases with increase in solar activity. Strong (S₄ ≥ 0.4) ionospheric scintillations accompanied by TEC depletions in the pre-midnight period is attributed to equatorial irregularities whereas the dusk period scintillations are related to the sporadic-E activity. Present results thus indicate that the current location at the northern edge of the EIA behaves as low as well as mid-latitude location.     

高校委托工程审计的质量控制与评价指标体系构建

委托工程审计质量关系到高校工程审计职能的发挥和投资建设目标的实现.结合高校工程审计实践,探讨高校委托工程审计质量控制关键路径,并据此构建质量评价指标体系,以实现高校委托工程审计质量有效控制和科学评价.     

One-dimensional numerical investigation on multi-cylinder gasoline engine fueled by micro-emulsions,CNG, and hydrogen in dual fuel mode

This research work is the novel state-of-the-art technology performed on multi-cylinder SI engine fueled compressed natural gas, emulsified fuel, and hydrogen as dual fuel. This work predicts the overall features of performance, combustion, and exhaust emissions of individual fuels based on AVL Boost simulation technology. Three types of alternative fuels have been compared and analyzed. The results show that hydrogen produces 20% more brake power than CNG and 25% more power than micro-emulsion fuel at 1500 r/min, which further increases the brake power of hydrogen, CNG, and micro-emulsions in the range of 25%, 20%, and 15% at higher engine speeds of 2500–4000 r/min, respectively. In addition, the brake-specific fuel consumption is the lowest for 100% hydrogen, followed by CNG 100% and then micro-emulsions at 1500 r/min. At 2500–5000 r/min, there is a significant drop in brake-specific fuel consumption due to a lean mixture at higher engine speeds. The CO, HC, and NO_x emissions significantly improve for hydrogen, CNG, and micro-emulsion fuel. Hydrogen fuel shows zero CO and HC emissions and is the main objective of this research to produce 0% carbon-based emissions with a slight increase in NO_x emissions, and CNG shows 30% lower CO emissions than micro-emulsions and 21.5% less hydrocarbon emissions than micro-emulsion fuel at stoichiometric air/fuel ratio.