基于主成分的编队级网络对抗效能评估指标体系

分析建立编队级网络对抗评估指标体系的原则,用主成分分析法对指标进行处理,求得7个主成分.根据正交原则将20个指标分配到7个主成分中,赋予每个主成分以实际含义,最终建立了编队级网络对抗效能评估指标体系.     

计算机辅助的低空风切变改出优化控制

介绍了动态系统的计算机辅助直接优化方法的原理及其在低空风切变改出飞行中的应用，利用较真实的风切变工程化模型，选择适当的控制函数模型，性能准则及其约束条件，通过计算机直接地，系统地和迭代地探寻最优条件，对飞机改出低空风切变控制进行了优化，获得了最佳改出性能飞行参数曲线，并与没有优化的改出引导策略结果作了比较，结果表明，通过优化，飞机改出低空风切变的性能获得了明显的改善。     

民用飞机维修目标与要求的指标体系研究

维修目标与要求(MORs)是为了能够并便于对产品进行维修而对航空器设计、维修和保障所提出的目标与要求,是设计、使用、维修、成本、效率等多种因素的综合权衡结果,也是维修工程学要实现的具体要求和指标。本文立足民用飞机,结合自身民机维修经验,从MORs指标确定的风险、过程、指标的分类等方面对MORs及其指标进行了研究。     

波音737-800飞机起飞性能随襟翼放出量的变化特点

波音737飞机与其他民用机型的一个不同之处是前缘缝翼在起飞时可以使用开缝状态。分析了波音737-800飞机下列四个起飞性能参数与襟翼放出量的关系:场地长度限制的最大起飞重量;爬升梯度限制的最大起飞重量;障碍物限制的最大起飞重量;起飞决断速度。结果显示这四个参数在襟翼放出量为10时出现异常,原因是前缘缝翼状态发生了变化。在襟翼放出量由5增大到10的过程中,前缘缝翼由不开缝的放出状态变成开缝的完全放出状态,降低了升力系数。     

现代民机新型灭火剂性能研究

对新型灭火剂研究背景和种类进行了简要介绍,对具有开发潜力的新型灭火剂的理化性能、毒性、腐蚀性、灭火性能、环保性能进行深入分析与研究。通过对新型灭火剂性能的研究,得出每种灭火剂的优缺点,筛选出适用于现代民机灭火系统的灭火剂。     

扇区繁忙时段交通流的不均衡度量化研究

以容流量及拥挤度等指标进行的空中交通运行评价无法全面反映空中交通的实际运行状况.在依据重要点对航路段进行分组的基础上,通过计算超容比,确定了扇区繁忙时段,基于多项式二次拟合分析了超容比与基尼系数以及泰尔指数之间的数量关系,基于3σ原则确定了不同超容比情况下的理想不均衡度的取值范围.应用方法对厦门1号扇区的实际运行数据进行了计算分析,验证了不均衡度量化方法的适用性.     

Materials selection for electronic enclosures in space environment considering electromagnetic interference effect

Using low power electronic devices for space applications to reduce the mass and energy consumption has lead to electromagnetic interference (EMI) problem. Electronic enclosures are used to shield electronic devices against EMI. In the past, electromagnetic shielding has been mainly the only criteria considered in electronic enclosure design. However, there are several structural and thermal requirements for selection of shielding materials which should also be taken into account. In this research work, three quantitative materials selection methods, i.e. Digital Logic (DL), Modified Digital Logic (MDL), and Z-transformation, are employed to select the best material from among a list of candidate materials. Composite and metallic electronic enclosures are explored and the best material is selected. Z-transformation method is applicable to both of the considered case studies while DL and MDL can only be used for solving one of them. Z-transformation method ranks aluminum as the first choice among various metallic materials. The wide range of Z-transformation application and its practical results confirm the superiority of Z-transformation method over DL and MDL methods.     

Al—Mg系合金工艺性能试验及结果

本文介绍了几种常用的铝镁合金，通过若干工艺性能的对比试验，以实际的检测数据分析说明各自的特点及其共性，以供产品设计和工程应用时选材参考。     

The comprehensive aerospace index (CASI): Tracking the economic performance of the aerospace industry

In this paper, we described the Comprehensive AeroSpace Index (CASI), a financial index aimed at representing the economic performance of the aerospace industry. CASI is build upon a data set of approximately 20 years of daily close prices set, from January 1987 to June 2007, from a comprehensive sample of leading aerospace-related companies with stocks negotiated on the New York Exchange (NYSE) and on the over-the-counter (OTC) markets. We also introduced the sub-indices CASI-AERO, for aeronautical segment, and CASI-SAT, for satellite segment, and considered the relation between them. These three indices are compared to others aerospace indices and to more traditional general financial indices like DJIA, S&P500 and Nasdaq. Our results have shown that the CASI is an index that describes very well the aerospace sector behavior, since it is able to reflect the aeronautical segment comportment as well as the satellite one. Therefore, in this sense, it can be considered as a representative index of the aerospace sector. Moreover, the creation of two sub-indices, the CASI-AERO and the CASI-SAT, allows to elucidate capital movements within the aerospace sector, particularly those of speculative nature, like the dot.com bubble and crash of 1998–2001.     

碳/环氧复合材料两次表面镜基板研制

文章介绍了碳/环氧复合材料两次表面镜基板的结构与铺层、选材与成型工艺,性能测试等内容。