超声速状态下航空发动机部件蜕化参数估计与性能恢复控制

为解决超声速状态下航空发动机部件蜕化参数估计与性能恢复控制的难题,基于改进卡尔曼滤波器,通过一种三维插值方法实现超声速状态包线范围内的发动机部件蜕化参数估计。而航空发动机性能恢复控制是在常规内环控制转速的基础上增加了外环控制回路,该回路主要包括推力估计模型与外环控制器两部分。基于最小二乘支持向量回归机设计了一种推力估计模型,其输入采用特征选择算法筛选推力估计模型的最优输入,相比于传统的不经选择的推力估计模型,精度有较大提高。设计了外环模糊PI（Proportional integral）控制器自适应调节内环转速指令来实现蜕化发动机性能恢复的目的。最后通过超声速状态下的数字仿真,验证了上述发动机部件蜕化参数估计与性能恢复控制方案的有效性。      

宽输入范围光伏并网逆变器控制方法

为适应光伏阵列的输出特性,光伏并网逆变器通常要具有很宽的直流输入电压范围,这使得其系统特性随直流电压的变化而改变,导致参数选择及优化设计比较困难.本文研制的单相并网逆变器采用三角载波PI控制器进行电流闭环控制,直流电压相对于额定电压变化时,采用同比改变载波的幅值或者同比改变PI控制器的比例、积分系数的方法,可使系统传递函数保持固定不变,这有利于系统稳定性和优化设计.文中给出了1 kW并网逆变器数字控制的设计和实现方法,实验结果表明该方法具有良好的稳定性和动态电流跟踪性能.     

Crew autonomy for deep space exploration: Lessons from the Antarctic Search for Meteorites

Future piloted missions to explore asteroids, Mars, and other targets beyond the Moon will experience strict limitations on communication between vehicles in space and control centers on Earth. These limitations will require crews to operate with greater autonomy than any past space mission has demonstrated. The Antarctic Search for Meteorites (ANSMET) project, which regularly sends small teams of researchers to remote parts of the southern continent, resembles a space mission in many ways but does not rely upon a control center. It provides a useful crew autonomy model for planners of future deep space exploration missions. In contrast to current space missions, ANSMET gives the crew the authority to adjust competing work priorities, task assignments, and daily schedules; allows the crew to be the primary monitor of mission progress; demands greater crew accountability for operational errors; requires the crew to make the most of limited communication bandwidth; adopts systems designed for simple operation and failure recovery; and grants the crew a leading role in the selection and stowage of their equipment.     

无人机用燃料电池阴极供气系统建模与控制

燃料电池因其高效、无污染、噪声小等特点,被认为是未来最具有潜力的无人机（UAV）用动力源,燃料电池阴极供气系统的控制技术是决定燃料电池系统性能和可靠性的关键。针对无人机用质子交换膜燃料电池（PEMFC）阴极供气系统,首先,考虑外界温度、压力、空气密度以及雷诺数等随高度变化的参数,建立了跨高度离心空压机模型并分析了其在不同高度下的工作特性,基于无刷直流电机反电势特征构建了高速空压机驱动电机模型。其次,通过计算燃料电池阴极氧气和氮气的动态分压获取了PEMFC电堆输出电压。设计了基于分数阶PI^λD^μ的过氧比和阴极气压控制方法,驱动电机采用有限集模型预测控制（MPC）实现快速的转矩响应,仿真结果表明设计的控制器可在无人机跨高度运行条件下实现过氧比的快速调节,同时维持阴极气压稳定,满足燃料电池阴极供气需求。     

双轴旋转调制光纤惯导系统运动隔离控制实现

框架旋转控制的稳定性、快速性、准确性是捷联式双轴旋转调制惯导系统发挥精度潜力的重要保障条件.针对这一需求,搭建了双轴旋转控制系统,选用了直流力矩电机结合旋转变压器的硬件结构,设计了基于DSP的高速控制线路板作为控制器,完成了信号流程的构建,并设计相应PI控制算法,实现了光纤陀螺惯导系统隔离载体运动的旋转控制功能.实验结果表明,IMU姿态隔离效率达99％以上,框架旋转控制性能良好,能够满足系统隔离载体运动的需求.     

飞控系统故障检测的参数模糊自适应调节

提出通过模型参数的模糊比例积分自适应调节，以校正基于模型的飞控系统故障检测中的系统数学模型偏差。针对模型中误差差较大的迎角导数值，将俯仰角加速度的测量值与教学模型估计值之差作为比例积分调节的反馈量，动态实时校正数学模型参数。     

Application of novel force control strategies to enhance robotic abrasive belt grinding quality of aero-engine blades

Robotic belt grinding has emerged as a finishing process in recent years for machining components with high surface finish and flexibility.The surface machining consistency, however,is difficult to be guaranteed in such a process.To overcome this problem, a method of hybrid force-position control combined with PI/PD control is proposed to be applied in robotic abrasive belt grinding of complex geometries.Voltage signals are firstly obtained and transformed to force information with signal conditioning methods.Secondly, zero drift and gravity compensation algorithms are presented to calibrate the F/T transducer which is installed on the robot end-effector.Next, a force control strategy combining hybrid force-position control with PI/PD control is introduced to be employed in robotic abrasive belt grinding operations where the force control law is applied to the Z direction of the tool frame and the positon control law is used in the X direction of the tool frame.Then, the accuracy of the F/T transducer and the robotic force control system is analyzed to ensure the stability and reliability of force control in the robotic grinding process.Finally, two typical cases on robotic belt grinding of a test workpiece and an aero-engine blade are conducted to validate the practicality and effectiveness of the force control technology proposed.     

无人机编队飞行控制器设计

主要对两架无人机斜线编队控制进行研究,建立了相应的数学模型,并基于PI控制律分别设计了x,y两个方向的控制器,利用解析和数值计算两种方法解算.仿真结果表明,设计的控制器可以控制僚机跟随长机机动,保持原有的相对位置和姿态.     

数控机床切削力负载模拟器的显式力控制算法设计

为了对数控机床进行可靠性试验,设计了一种基于3P-(4S)并联机构的负载模拟器。基于PI反馈控制的显式力控制算法,并引入了模糊控制器,提高系统对不同加载误差的适应性。在控制系统中引入了力前馈控制器,提高控制系统的动态性能,减少实际加载力的滞后。同时,由于加载目标即机床主轴的进给运动轨迹未知,因此引入了主轴位置预测前馈以进行运动补偿,减少主轴运动所带来的干扰。最后设计并实施了静态与动态负载模拟试验,验证了所提控制算法的有效性。     

Closed-loop flow control of an ultra-compact serpentine inlet based on nondimensional model

Ultra-compact serpentine inlet faces serve inlet-engine compatibility issues due to flow distortion. To ensure inlet-engine compatibility over a wide range of Mach number, novel active flow control techniques with the ability of being opened or adjusted as needed draw many attentions in recent years. In this paper, a feedback control system was developed based on the method of microjet blowing. The proposed system includes a pressure adjusting valve to adjust the control effort, a dynamic pressure sensor to sense the inlet distortion intensity, a signal processing instrument to calculate the Root-Mean-Squared (RMS) pressure, and a controller to implement feedback control. To achieve high quality closed-loop controls at dynamic conditions, a novel nondimensional feedback method was developed. The advantage of this nondimensional method was validated at both off-design and arbitrarily changing Mach number conditions. With a sectional PI control law, the RMS control error reduced more than 56% at arbitrary changing conditions. Works in this paper also showed that the dynamics of this nondimensional system can be simplified as a stable second-order overdamped system.