厦门机场低空风切变产生的地理成因分析

厦门机场航班飞行遭遇低空风切变的频次较高,危及飞行安全。产生风切变的原因主要有两大类,一是大气运动本身的变化,一是地理、环境因素。本文着重分析因厦门机场地理环境及环境变化导致风切变产生的原因。     

高职改革发展综合实验区背景下高职体育课程的教学现状剖析

南通市是国家教育体制改革试点项目"地方政府促进高职教育改革发展综合试验区"江苏3个试点市之一。而高等职业院校体育课程是学校教育的重要分支,其教育目标既要实现高校体育基本培养目标又要实现行业、职业需求特殊目标。文章通过调查研究对南通市体育课程教学现状进行分析研究,以求找到改革的切入点与方向。     

LEVEL DECISION-MAKING FOR AERO-ENGINE MODULES BASED ON INCREMENTAL KNOWLEDGE LEARNING

The maintenance of an aero-engine usually includes three levels, and the maintenance cost and period greatly differ depending on the different maintenance levels. To plan a reasonable maintenance budget program, airlines would like to predict the maintenance level of aero-engine before repairing in terms of performance parame- ters, which can provide more economic benefits. The maintenance level decision rules are mined using the histori- cal maintenance data of a civil aero-engine based on the rough set theory, and a variety of possible models of upda- ting rules produced by newly increased maintenance cases added to the historical maintenance case database are in- vestigated by the means of incremental machine learning. The continuously updated rules can provide reasonable guidance suggestions for engineers and decision support for planning a maintenance budget program before repai- ring. The results of an example show that the decision rules become more typical and robust, and they are more accurate to predict the maintenance level of an aero-engine module as the maintenance data increase, which illus- trates the feasibility of the represented method.     

基于HLA的舰空导弹协同制导作战仿真系统方案

针对舰空导弹协同制导仿真系统的设计问题,通过给定舰舰协同和空舰协同这两种典型协同制导作战模式的作战流程,对仿真系统的组成及组成单元的模型构成进行了深入的分析。基于高层体系结构HLA(High Level Architecture)分布式仿真技术,对分布式半实物的协同制导仿真系统进行了方案设计,并且通过采用实时操作系统内核和半实物仿真代理联邦成员的方法,有效地解决了半实物仿真的实时性要求和半实物仿真与分布式仿真的互操作等关键问题。     

Investigation on Thermal Contact Conductance Based on Data Analysis Method of Reliability

The method of reliability is proposed for the investigation of thermal contact conductance (TCC) in this study. A new definition is introduced, namely reliability thermal contact conductance (RTCC), which is defined as the TCC value that meets the reliability design requirement of the structural materials under consideration. An experimental apparatus with the compensation heater to test the TCC is introduced here. A practical engineering example is utilized to demonstrate the applicability of the proposed approach. By using a statistical regression model along with experimental data obtained from the interfaces of the structural materials GH4169 and K417 used in aero-engine, the estimate values and the confidence level of TCC and RTCC values are studied and compared. The results show that the testing values of TCC increase with interface pressure and the proposed RTCC model matches the test results better at high interface pressure.     

基于电子倍增CCD的微光成像遥感器焦面电路设计

文章介绍了一种以EMCCD为探测器件的星载遥感器焦面电路实现方案。利用FPGA基于VHDL语言设计了驱动时序发生模块,运用直接数字频率合成技术、LVDS总线传输技术和大幅值信号放大技术构建了EMCCD硬件驱动电路。为满足卫星在线配置的需求,电路设置了遥控遥测接口模块。在EMCCD读出模块和焦面电源模块设计中提出了一定的降噪方法。最后,对EMCCD焦面电路样机进行测试,证实了该设计的有效性和可行性。     

射频干扰对InSAR干涉处理的影响分析

窄带干扰是低频段InSAR系统面临的主要射频干扰之一,它的存在会对干涉相位产生严重影响,进而导致高程反演误差。本文推导了窄带干扰影响下的InSAR干涉相位的解析表达式,给出了干涉相位对窄带干扰各参数的敏感度方程,仿真分析了窄带干扰对P波段InSAR系统干涉处理的影响。结果表明,窄带干扰经过成像后其幅度调制函数近似为方位时间的sinc函数,在SAR图像中表现为沿距离向的干扰条带。干涉相位对窄带干扰信号的功率较敏感,对其频率较不敏感,干涉相位和高程反演误差随着干信比的增加而增加。     

无需先验信息的水平集SAR图像分割方法

给出了一种基于水平集演化、无需任何先验信息的SAR图像分割方法.该方法是一种基于区域信息的统计活动轮廓模型方法,通过利用分段阶跃函数估计图像概率密度函数,克服了利用特定概率分布模型估计概率密度函数时,需要利用先验信息预先假定图像概率分布模型的问题;通过引入惩罚项,避免了费时且难于操作的水平集函数重新初始化过程.还给出了具体的数值实现方案和相关参数取值,改进了数值实现中的迭代终止条件.实验结果表明,固定使用列出的参数,无需任何人为干预,对于大多数图像都可获得令人满意的分割结果;对于少数图像,通过简单的参数调整也可得到良好结果.     

面向多级中断系统的任务最差响应时间分析

针对航天嵌入式系统中存在多级中断情况下的时间分析问题,提出了中断与任务混合的响应时间计算模型。该模型中断与任务使用统一的优先级定义,将多级中断嵌套的响应时间分析与任务嵌套的响应时间分析相结合,推导出了混合模型下响应时间计算公式。并进一步比较了中断与任务的异同,阐述了公式中关键参数的含义与计算方法。最后利用开源的LEON3平台和Modelsim软件对所述方法进行了仿真验证,结果表明,任务最差响应时间过估小于5%,可以得到准确的分析结果,有较高的工程应用价值。     

以维修计划为中心的直接维修成本估算方法

维修经济性是控制民机运营成本的关键因素。飞机计划维修具有明显的阶段性和周期性,从机龄角度飞机分为运营初期、成熟期和老龄期;按维修深度计划维修分为航线检查、A检．c检和D检。本文综合考虑机龄和计划维修之间的关系．构造了三层三等级的维修成本计算模型．并从维修的角度提出控制维修成本的措施。