叠层穿刺CF/Al复合材料准静态拉伸力学行为与失效机制

针对新型的叠层穿刺碳纤维织物增强铝基复合材料（CF/Al复合材料）,通过细观力学数值模拟与实验结合的方法研究了其在准静态拉伸载荷作用下的渐进损伤与断裂力学行为。复合材料经向拉伸弹性模量、极限强度与断裂应变的实验结果分别为129.61 GPa、630.14 MPa和0.75%,细观力学模型预测误差分别为-9.41%、7.57%和1.33%,均匀化计算的宏观应力-应变曲线与实验曲线总体上相符。经向拉伸变形初期首先出现经/纬纱交织处基体合金的局部损伤,随着拉伸应变量的增大依次发生纬纱和穿刺纱的横向开裂,拉伸变形后期基体合金与经纱失效引起宏观应力-应变曲线的急剧下降,复合材料拉伸断口表现为经纱轴向断裂及纬纱和穿刺纱横向开裂共存的形貌特征,纤维拔出和基体断裂导致的经纱轴向断裂是诱发复合材料最终失效的主要机制。     

The impact of orbital errors on the estimation of satellite clock errors and PPP

Precise satellite orbit and clocks are essential for providing high accuracy real-time PPP (Precise Point Positioning) service. However, by treating the predicted orbits as fixed, the orbital errors may be partially assimilated by the estimated satellite clock and hence impact the positioning solutions. This paper presents the impact analysis of errors in radial and tangential orbital components on the estimation of satellite clocks and PPP through theoretical study and experimental evaluation. The relationship between the compensation of the orbital errors by the satellite clocks and the satellite-station geometry is discussed in details. Based on the satellite clocks estimated with regional station networks of different sizes (∼100, ∼300, ∼500 and ∼700 km in radius), results indicated that the orbital errors compensated by the satellite clock estimates reduce as the size of the network increases. An interesting regional PPP mode based on the broadcast ephemeris and the corresponding estimated satellite clocks is proposed and evaluated through the numerical study. The impact of orbital errors in the broadcast ephemeris has shown to be negligible for PPP users in a regional network of a radius of ∼300 km, with positioning RMS of about 1.4, 1.4 and 3.7 cm for east, north and up component in the post-mission kinematic mode, comparable with 1.3, 1.3 and 3.6 cm using the precise orbits and the corresponding estimated clocks. Compared with the DGPS and RTK positioning, only the estimated satellite clocks are needed to be disseminated to PPP users for this approach. It can significantly alleviate the communication burdens and therefore can be beneficial to the real time applications.     

The effect of spatial truncation error on variance of gravity anomalies derived from inversion of satellite orbital and gradiometric data

The spatial truncation error (STE) is a significant systematic error in the integral inversion of satellite gradiometric and orbital data to gravity anomalies at sea level. In order to reduce the effect of STE, a larger area than the desired one is considered in the inversion process, but the anomalies located in its central part are selected as the final results. The STE influences the variance of the results as well because the residual vector, which is contaminated with STE, is used for its estimation. The situation is even more complicated in variance component estimation because of its iterative nature. In this paper, we present a strategy to reduce the effect of STE on the a posteriori   variance factor and the variance components for inversion of satellite orbital and gradiometric data to gravity anomalies at sea level. The idea is to define two windowing matrices for reducing this error from the estimated residuals and anomalies. Our simulation studies over Fennoscandia show that the differences between the 0.5°×0.5°$0.5°\times 0.5°$ gravity anomalies obtained from orbital data and an existing gravity model have standard deviation (STD) and root mean squared error (RMSE) of 10.9 and 12.1 mGal, respectively, and those obtained from gradiometric data have 7.9 and 10.1 in the same units. In the case that they are combined using windowed variance components the STD and RMSE become 6.1 and 8.4 mGal. Also, the mean value of the estimated RMSE after using the windowed variances is in agreement with the RMSE of the differences between the estimated anomalies and those obtained from the gravity model.     

Removing orbital debris with lasers

Orbital debris in low Earth orbit (LEO) are now sufficiently dense that the use of LEO space is threatened by runaway collision cascading. A problem predicted more than thirty years ago, the threat from debris larger than about 1 cm demands serious attention. A promising proposed solution uses a high power pulsed laser system on the Earth to make plasma jets on the objects, slowing them slightly, and causing them to re-enter and burn up in the atmosphere. In this paper, we reassess this approach in light of recent advances in low-cost, light-weight modular design for large mirrors, calculations of laser-induced orbit changes and in design of repetitive, multi-kilojoules lasers, that build on inertial fusion research. These advances now suggest that laser orbital debris removal (LODR) is the most cost-effective way to mitigate the debris problem. No other solutions have been proposed that address the whole problem of large and small debris. A LODR system will have multiple uses beyond debris removal. International cooperation will be essential for building and operating such a system.     

基于修正差分进化算法确定周期内多载波微放电等效功率

微放电是空间微波部件设计所必须考虑的失效效应之一,随着空间宽带多载波模式的广泛采用,多载波条件下微波部件微放电问题引起广泛关注。针对周期内多载波微放电等效功率计算所采用传统经验公式的不足,提出了一种基于修正差分进化算法的确定周期内多载波微放电等效功率的全局优化方法。该方法通过对多载波合成信号功率特性进行分析,推导获得了 20个电子渡越时间内信号能量的表达式,采用二次插值法进行局部搜索,采用修正差分进化算法进行全局优化,从而高效、准确获得全局最优解。以幅度相等、频率间隔相等的多载波信号为例,进行了等效功率的确定,与经验公式的预测结果相当,验证了所提出方法的有效性;同时,对幅度不同、频率间隔不等的多载波信号进行了处理,获得了能够指导微波部件微放电设计的最坏状态及其等效功率。所提出方法不仅适用于幅度不同、频率间隔不等的多载波信号情况,并且能够提供微放电最坏状态时的相位分布,为多载波微放电实验验证提供相位输入。所提出方法相比传统的基于经验公式的方法具有明显优势,为空间宽带多载波工作微波部件微放电设计提供有效依据,在卫星转发器多载波微放电分析及设计中具有价值。     

Progress of microgravity material research during the period of 2007—2009

Orbital experimental researches on crystal growth of Mn-doped GaSb and Bi2Se0.21Te2.79 are briefly summarized. The space experiments were completed in September of 2007 on broad the Foton-M3 satellite of Russia. Ground-based researches on the solidification behaviors of Al-Al3Ni, Al-Al2Cu, Ag-Cu eutectic, Al-Pb monotectic and Cu-Co peritectic alloys in a 50-meter-high drop tube were investigated. New experimental results on the ultrasonic field and the temperature recycling induced to chiral symmetry breaking of NaClO3 crystal also were reported in the present paper.      

基于改进差分进化算法的飞行控制律评估方法

 针对基本差分进化(DE)算法收敛慢、易陷入局部最优的问题,提出了基于混沌理论(CT)与高斯扰动的DE算法,进而通过典型测试函数仿真证明了该方法在收敛速度与全局搜索能力方面均优于基本型和其他改进型DE算法。在此基础上构建了基于DE算法的飞行控制律评估流程与实施步骤。实例表明,该方法克服了传统评估方法的缺陷,可在全飞行包线范围内及所有可预测参数摄动情况下对飞行控制律进行快速、准确的评估。     

箱梁颤振过程中旋涡的演化规律及气动力的变化特性

利用粒子图像测速技术（PIV）观测了箱梁颤振过程中模型周围流场的旋涡特征,以模型扭转振动位移作为参考信号,采用相位平均的方法研究了旋涡规律性演化对模型周期性振动的驱动作用。风速较低时,箱梁振幅很小,其尾部风嘴附近上侧的旋涡尺度也很小,不易观测到,而下侧的旋涡尺度较大,其形状接近于圆形。当风速接近颤振临界风速时,箱梁振幅明显增大,并且模型尾部风嘴上侧的旋涡尺度也显著增大,达到与下侧旋涡尺度相匹配的程度,模型尾部风嘴上下侧旋涡的交替作用主导了结构振动直到模型振动发散。基于流固松耦合的计算策略,采用计算流体动力学（CFD）的数值方法模拟了箱梁颤振临界状态下的绕流特性,结合正交特征分解（POD）的方法研究了模型颤振时刻表面压力的空间分布特征,通过分析发现在颤振过程中箱梁表面波动压力的主控成分向迎风侧风嘴漂移。     

TC11焊接接头高周疲劳分形损伤模型

根据金属疲劳断口具有几何分形特征,将Chaboche高周疲劳损伤模型推广到分数维空间,建立了综合考虑断口细观特征的高周疲劳分形损伤演化模型.针对TC11钛合金电子束焊接接头,以载荷控制的疲劳试验为基础研究其高周疲劳性能;采用扫描电镜法(SEM)对断口微观特征进行定量分析,计算得到了各级载荷下疲劳断口的分形维数;通过对试...