螺旋相位板生成涡旋电磁波仿真研究

涡旋电磁波的产生方式有多种,使用涡旋相位板即为其中重要的一种方式。该文对螺旋相位板产生涡旋电磁波的情况进行了仿真.通过仿真。给出了在喇叭天线口面上覆盖螺旋相位板时生成的涡旋电磁波的幅度相位分布。     

Nonlinear dynamic modeling of a helicopter planetary gear train for carrier plate crack fault diagnosis

Planetary gear train plays a significant role in a helicopter operation and its health is of great importance for the flight safety of the helicopter. This paper investigates the effects of a planet carrier plate crack on the dynamic characteristics of a planetary gear train, and thus finds an effec-tive method to diagnose crack fault. A dynamic model is developed to analyze the torsional vibra-tion of a planetary gear train with a cracked planet carrier plate. The model takes into consideration nonlinear factors such as the time-varying meshing stiffness, gear backlash and viscous damping. Investigation of the deformation of the cracked carrier plate under static stress is performed in order to simulate the dynamic effects of the planet carrier crack on the angular displacement of car-rier posts. Validation shows good accuracy of the developed dynamic model in predicting dynamic characteristics of a planetary gear train. Fault features extracted from predictions of the model reveal the correspondence between vibration characteristic and the conditions (length and position) of a planet carrier crack clearly.     

Advances and trends in plastic forming technologies for welded tubes

With the implementation of environmental protection, sustainable development and conservation-oriented policies, components and parts of thin-walled welded tubes have gained increasing application in the aircraft and automotive industries because of their advantages: easily achieving forming and manufacturing process at low cost and in a short time. The current research on welded tube plastic forming is mainly concentrated on tube internal high-pressure forming, tube bending forming, and tube spinning forming. The focuses are on the material properties and characterization of welded tubes, finite element modeling for welded tube forming, and inhomogeneous deformation behavior and the mechanism and rules of deformation coordination in welded tube plastic forming. This paper summarizes the research progress in welded tube plastic forming from these aspects. Finally, with a focus on the urgent demand of the aviation, aerospace and automotive industries for high-strength and light-weight tubes, this paper discusses the development trends and challenges in the theory and technology of welded tube plastic forming in the future. Among them,laser tailor-welded technology will find application in the manufacture of high-strength steel tubes.Tube-end forming technology, such as tube flaring and flanging technology, will expand its application in welded tubes. Therefore, future studies will focus on the FE modeling regarding how to consider effects of welding on residual stresses, welding distortions and microstructure, the inhomogeneous deformation and coordination mechanism of the plastic forming process of tailor-welded tubes, and some end-forming processes of welded tubes, and more comprehensive research on the forming mechanism and limit of welded tubes.     

金属弹簧管性能影响因素的仿真分析

为了研究高温密封组件金属弹簧性能,本文通过对波音公司编网状弹簧管结构和Streck心脏支架结构的研究,建立了编织弹簧的几何拓扑构型和数学模型,推导了弹簧直径计算公式。采用AUTODESK3D-MAX构建了编织弹簧的仿真模型,用ANSYS仿真软件分别从编织丝直径、编织密度以及编织方法 3方面探究不同测试对弹簧性能的影响。结果表明,增加弹簧丝直径、降低弹簧管轴向方向的编织密度、提高圆周方向的编织密度、向外的弹簧管编织方式可有效提高弹簧管的回弹性能。     

舰载直升机理论风限图飞行模拟获取方法

获取舰载直升机实用风限图,仅依靠实装飞行试验或建模仿真都是非常困难的。通过起降飞行模拟试验获取理论风限图,结合少量的海上实装飞行验证试验是一种综合较优的方法。起降飞行模拟试验需要真实飞行员和高等级飞行模拟器参与,飞行模拟器中的母舰气流场数据、母舰运动可由建模仿真或试验测试得到,且必须考虑母舰气流场的非定场特性;只有当飞行员视景或视觉反馈受限时(如能见度降低时),飞行模拟器基座的六自由度运动才是必需的;用DIPES或Bedford方法量化飞行员主观操纵负担,结合记录的客观操纵数据,评判起降难度;典型的飞行模拟试验程序包含了不同风况下的进近和甲板着舰,通常每隔15°和5kn一个风况。通过起降飞行模拟试验得到的理论风限图,可以更加有效和安全地指导海上实装飞行验证试验,最终获得实用风限图。     

部署retro-GEO巡视器的月球借力飞行轨道分析

retro-GEO是指逆行(retrograde)地球静止轨道(geostationary Earth orbit,GEO),该轨道与GEO轨道高度相同或相近,但倾角为180°,安装在retro-GEO卫星上的巡视器可每12 h对GEO带空间资产附近碎片环境安全预警.直接西向发射retro-GEO卫星存在地面测控和发射...     

飞行模拟器中的虚拟声音建模与实时渲染技术

虚拟声音的建模与渲染是飞行模拟器虚拟环境仿真中的关键技术,结合物理、心理、建筑、室内声学以及数字音响艺术等多门学科,提出适用于分布式飞行模拟器虚拟仿真系统的离线综合声音建模与动态均衡渲染算法,经过数字压限器、扩展器以及激励器等环节,将大规模音频数据根据虚拟权重进行离线重构;运用五段等响折线法,并结合心理声学构建了基于大规模音源的动态压缩比算法;结合座舱虚拟环境的等效吸声系数算法和混响时间算法;综合功率谱密度函数与特性共振峰,总结出与一系列状态量对应的幅频特性,应用前馈(BP)网络算法对数字均衡器进行实时调参,实现了发动机推力噪声的动态数字音频实时渲染;并基于Direct Sound的音频特效程序接口开发了一套基于高层体系结构(HLA)的分布式飞行模拟器实时音效系统,仿真结果验证了声音建模与渲染算法的有效性。     

飞机蒙皮铆接过程中阻尼减振降噪方法探讨

针对铆接工作过程中振动和噪声过大影响工作人员身体健康以及装配质量等严峻问题,介绍了阻尼减振降噪技术,探讨了铆接过程中阻尼减振降噪的可行性技术,并简要的介绍了国内外在这一方面的研究成果。最后,认为利用建模仿真模拟来优化阻尼结构的设计和开发以及确定阻尼敷设的最优位置等。并总结出如何设计阻尼器以及设计一款合适的阻尼器所必需具备的几个特性。     

航空发动机组件化建模技术

提出了使用组件化开发通用航空发动机仿真平台的思想:从发动机结构的角度将发动机模型分解成多个组件;从软件功能的角度将仿真软件的辅助部分也分解成多个组件.在此基础上开发了涡扇发动机的仿真平台,取得了良好的效果.所建立的仿真系统实现了模块化、层次化,易于维护和改进,可扩展性强,提高了代码重用率,体现了该框架的灵活性.      

某微型发动机离心甩油燃烧室建模及数值模拟

对某微型发动机离心甩油燃烧室进行了三维建模及数值模拟。湍流模型采用旋流修正的Realizable k-ε双方程模型,化学反应及组分浓度采用简化的概率密度函数模型,液相采用离散相模型;计算得出了组分、压力、温度的分布特性,分析计算结果可知,该燃烧室的外壁面冷却考虑较少,同时其出口温度不均匀系数较大;提出了掺混孔改进方案,数值模拟结果表明,改进后的燃烧室出口温度分布得到明显改善。