利用GPS实现高轨卫星定位的抗远近效应算法

针对GPS应用于高轨卫星定位面临的远近效应问题, 提出利用正交相关的联合极大似然估计算法来对GPS信号进行二维搜索, 可以得到正确的码延时及多普勒估计. 极大似然估计算法首先利用滑行相关法对仿真信号中的强信号进行搜索, 得到强信号模型, 然后利用正交相关去掉强信号, 最终实现对弱信号的正确捕获. 本文对高轨卫星接收到的GPS信号进行了功率分析, 并建立了信号模型, 进行了算法仿真. 结果表明, 这种估计算法能够提高二维搜索性能, 有效解决远近效应问题.      

“嫦娥一号”卫星的调相轨道设计

中国第一颗月球探测卫星"嫦娥一号"的飞行轨道的设计中采用了调相轨道,在"长征三号甲"运载火箭提供的超地球同步转移轨道与地月转移轨道之间增加了一段由周期为24h和48h轨道构成的环绕地球飞行的调相轨道。为了将几条不同的轨道精确地拼接起来,必须考虑地球引力场对轨道的摄动影响。克服这个难点的做法是基于经典的轨道摄动理论,先将整段调相轨道设计为考虑地球引力场J2项影响的平轨道,在与运载的发射轨道拼接时,先将运载的包括短周期摄动的瞬时轨道转换为平轨道,在与地月转移轨道拼接时将调相轨道转换成拼接点的瞬时轨道。由于采用了平轨道的处理方法使得轨道控制策略的表述十分简明并易于操作。     

弹体脉动压力特征的实验研究

针对弹体模型进行了表面脉动压力特性实验研究,实验马赫数M∞ =0．8、0．84、0．86、0．92、1.0、1．15、2．0、2．5,实验迎角α=5°3°、0°、3°、5°,沿弹体轴向测量了14个特征点的脉动压力,得到了弹体表面测点的脉动压力系数、频谱曲线以及相关性系数等实验数据。结果表明：脉动压力系数总体上随马赫数增加而降低。不同马赫数,迎角α=0°的条件下沿轴向各测点压力脉动之间的空间相关性有类似的分布规律,且各测点脉动压力基本互不相关。在实验的迎角下,脉动压力系数在弹体表面曲率变化较小的位置基本上不随来流迎角的改变而变化,膨胀拐角肩部位置的脉动压力系数随着迎角的改变而变化较大。超声速来流的功率谱能量峰值所对应的主频出现明显的低频特征;跨音速来流时特征频率随着马赫数的增加而增大,功率谱能量峰值位于特征频率处。     

Faster algorithm of debris cloud orbital character from spacecraft collision breakup

Space debris is polluting the space environment. Collision fragment is its important source. NASA standard breakup model, including size distributions, area-to-mass distributions, and delta velocity distributions, is a statistic experimental model used widely. The general algorithm based on the model is introduced. But this algorithm is difficult when debris quantity is more than hundreds or thousands. So a new faster algorithm for calculating debris cloud orbital lifetime and character from spacecraft collision breakup is presented first. For validating the faster algorithm, USA 193 satellite breakup event is simulated and compared with general algorithm. Contrast result indicates that calculation speed and efficiency of faster algorithm is very good. When debris size is in 0.01–0.05 m, the faster algorithm is almost a hundred times faster than general algorithm. And at the same time, its calculation precision is held well. The difference between corresponding orbital debris ratios from two algorithms is less than 1% generally.     

Assessment of the consequences of the Fengyun-1C breakup in low Earth orbit

On 11 January 2007, the People’s Republic of China conducted a successful anti-satellite test against one of their defunct polar-orbiting weather satellites. The target satellite, called Fengyun-1C, had a mass of 880 kg and was orbiting at an altitude of about 863 km when the collision occurred. Struck by a direct-ascent interceptor at a speed of 9.36 km/s, the satellite disintegrated, spreading the cataloged fragments between 200 and 4000 km, with the highest concentration near the breakup height. By the end of April 2008, 2377 pieces of debris, including the original payload remnant, had officially been cataloged by the US Space Surveillance Network. Of these, nearly 1% had reentered the Earth’s atmosphere. This deliberate act is the largest debris-generating event on record, and its consequences will adversely affect circumterrestrial space for many years.     

MDO approach for early design of aerobraking orbital transfer vehicles

This paper presents a new multidisciplinary design optimization (MDO) methodology for preliminary design of an aeroassisted orbital transfer vehicle (AOTV) performing a two-way transfer between a low-Earth “parking” orbit and a high-energy orbit. This work has been performed in the frame of Onera's CENTOR [N. Bérend, C. Jolly, F. Jouhaud, D. Lazaro, Y. Mauriot, C. Monjaret, J.M. Moschetta, M. Parlier, J.L. Pastre, Y. Servouze, J.L. Vérant, Project CENTOR: Preparing the design of future orbital transfer vehicles; IAC-07-D.2.3.07, in: 58th International Astronautical Congress, 24–28/09/2007, Hyderabad, India] project whose objective is to prepare tools and methodology for studying and designing future space transportation systems for new kinds of missions such as on-orbit servicing (OOS), payload ferrying, or in-situ observation of space-debris. Using simplified models and an appropriate low-dimension formulation for the optimization problem the method makes possible to obtain rapidly and easily a global view of the trade-off between the payload mass and the total mass. It also makes possible to discuss the feasibility of the vehicle with regard to different multidisciplinary constraints and technology hypotheses for the heat shield. This approach is illustrated by eight different AOTV design studies, considering two different missions (LEO–MEO and LEO–GEO), two different propulsion technologies (LOX-LH2 and LOX-CH4) and two different thermal protection system (TPS) characteristics. In each case, we discuss the feasibility and characteristics of the lightest vehicle carrying a prescribed 100 kg payload, and, conversely, a heavy vehicle with a prescribed 18 ton total mass, carrying the heaviest possible payload.     

一种基于Gabor滤波的不同聚焦图像融合方法

提出了一种基于Gabor滤波对不同聚焦图像融合的方法。通过取不同方向的Gabor滤波器对待融合的图像进行多方向滤波,从而提取出不同方向的高频能量,再通过比较高频能量大小来判断属于清晰还是模糊像素,以此达到融合不同聚焦图像的目的。实验表明这种方法简单有效,给出了图像融合的实验结果,并与小波变换和简单取平均融合结果进行了比较。     

光电干扰箔片云团运动规律的仿真研究

鉴于自燃箔片云团对红外成像导引头光电干扰有效的试验结果,针对气动阻力大的箔片云团,采取常用的气动阻力公式f=-kv2来描述运动规律,引入匀降速度u,分别推导出水平方向和垂直方向上升段和下降段的速度、位移的计算公式.结合图象分析对云团的运动规律进行仿真研究,还讨论了采用不同气动阻力公式对拟合系数和拟合相似度的影响.该方法可推广应用于大气层内亚声速质点运动轨迹的解析方法.     

数字校正网络动态特性的软件测试方法

为检验数字校正网络软件实现的正确性,本文给出了一种利用数学方法实现对网络频率特性进行软件测试的方法,并对该方法进行了详细的理论分析,在此基础上进行了某型号软件的频率特性测试,结果表明,该方法避免了硬件测试的繁琐工作及不稳定性,且不受硬件条件及环境限制,具有实用价值。     

空间飞行器碎片防护结构的简化设计

给出一种基于实验和理论分析的航天器碎片防护结构简化设计方法 ,该方法可用于进行大型空间飞行器碎片防护结构的方案选择和初步结构设计。利用空间碎片的工程环境模型和防护结构几何经验公式 ,采用“设计碎片”的概念 ,对防护结构进行几何结构设计和质量估算 ,并采用改进的防护性能验证算法进行空间碎片的风险评估。通过对惠式防护结构的计算 ,得到的计算结果基本符合实际要求。