Mechanism parameters optimization of bionic frog jumping robot based on velocity directional manipulability measure

以速度方向可操作度作为跳跃性能的评价指标,从机构设计角度寻求改善仿蛙跳跃机器人跳跃性能的方法.在仿蛙跳跃机器人机构模型的基础上,建立了起跳阶段的运动学方程,得到机器人从关节空间到质心运动空间的速度映射关系,结合速度方向可操作度,利用优化算法对仿蛙跳跃机器人的机构参数进行优化,使机器人的跳跃性能达到最佳.优化结果表明,运用速度方向可操作度理论,对跳跃机器人机构参数进行优化研究是有效可行的.     

ASW-RTS:一种软件性能数据在线检测方法

在软件健康管理系统中,需要对相关被测构件的性能进行在线检测,从而确定构件的健康状态。针对被测构件的性能衰退检测问题,在AR(p)模型基础上,结合时间序列滚动式算法的准确性,提出了一种具有自适性策略的ASWRTS算法,用于对被测构件革新异常类性能数据的在线检测,提高检测的准确度,并基于该算法设计了构件性能异常数据的在线检测过程。实验结果表明,该算法将检测精度提高了50%左右,能够有效在线检测构件的性能衰退,说明了该算法的正确性和有效性。     

现代飞机俯仰跟踪时诱发振荡预测分析

根据飞机纵向ＰＩＯ的特点，提出了预测分析ＰＩＯ所用的人－机闭环系统数学模型，其中飞机采用等效系统数学模型，驾驶员操纵采用ＭｃＲｕｅｒ模型，参数按地面人－机模拟飞行跟踪试验确定，集中介绍了四种飞机纵向ＰＩＯ预测准则，Ｓｍｉｔｈ－Ｇｅｄｄｅｓ准则，修正带宽准则，增益，相位裕度准则，Ｎｅａｌ－Ｓｍｉｔｈ原则，并提供了相应的计算方法。     

飞机纵向驾驶员诱发振荡灵敏度分析

采用系统灵敏度理论，以修正的带宽准则，增益和相位裕度准则以及Ｎｅａｌ－ｓｍｉｔｈ准则等飞机纵向驾驶员诱发振荡（ＰＩＯ）预测准则作为系统指标，建立了参数变化对诱发振荡预测指标影响的灵敏度公式，以ＪＪ７飞机为例，给出了飞机，操纵系统及驾驶员参数上述指标影响的灵敏度，根据计算结果进行了ＰＩＯ参数敏度预测分析，同时与数值仿真结果进行了对比分析。     

Reliable flight performance assessment of multirotor based on interacting multiple model particle filter and health degree

Multirotor has been applied to many military and civilian mission scenarios. From the perspective of reliability, it is difficult to ensure that multirotors do not generate hardware and software failures or performance anomalies during the flight process. These failures and anomalies may result in mission interruptions, crashes, and even threats to the lives and property of human beings. Thus, the study of flight reliability problems of multirotors is conductive to the development of the drone industry and has theoretical significance and engineering value. This paper proposes a reliable flight performance assessment method of multirotors based on an Interacting Multiple Model Particle Filter (IMMPF) algorithm and health degree as the performance indicator. First, the multirotor is modeled by the Stochastic Hybrid System (SHS) model, and the problem of reliable flight performance assessment is formulated. In order to solve the problem, the IMMPF algorithm is presented to estimate the real-time probability distribution of hybrid state of the established SHS-based multirotor model, since it can decrease estimation errors compared with the standard interacting multiple model algorithm based on extended Kalman filter. Then, the reliable flight performance is assessed with health degree based on the estimation result. Finally, a case study of a multirotor suffering from sensor anomalies is presented to validate the effectiveness of the proposed method.     

New design simulation for a high-altitude dual-balloon system to extend lifetime and improve floating performance

This paper presents a comprehensive simulation for a high-altitude dual-balloon system which consists of zero- and super-pressure balloons. Preliminary calculations were established to describe the basic concept of the new integrated system. A mathematical model was investigated to simulate the ascending and floating processes which considered the atmospheric conditions and thermodynamic variations. Based on the simulation, results showed that the floating altitude stability between daytime and nighttime was improved. This integrated system supports higher floating altitude levels than those of ordinary balloons and extends the lifetime of floating balloon systems. Moreover, results demonstrated that the integrated system was lighter than ordinary balloons, saving useful weight for effective payload. Furthermore, exploiting the advantages of both kinds of balloons while avoiding the difficulties was a significant goal in the current design to promote the floating performance of high-altitude balloons technology.     

一种尾流消散动态预测的改进算法

尾流间隔是增大跑道容量的主要限制因素之一，为了在保持安全水平的前提下有效地增大跑道容量，可以对尾流消散进行动态预测，并据此缩减尾流间隔。研究了一种尾涡消散动态预测算法，该算法考虑了真实大气的大气分层、湍流、侧风、迎面风、风切变以及地效影响，并用一阶后向差分对该算法进行了离散化改进；在改进算法的基础上，时进近阶段尾流的消散在Matlab中进行了仿真计算；计算结果复现了尾涡的下沉现象和侧风对尾涡传输的线性累积效应。     

A Structured Mesh Euler and Interactive Boundary Layer Method for Wing/Body Configurations

To compute transonic flows over a complex 3D aircraft configuration, a viscous/inviscid interaction method is developed by coupling an integral boundary-layer solver with an Eluer solver in a ＂semi-inverse＂ manner. For the turbulent boundary-layer, an integral method using Green＇s lag equation is coupled with the outer inviscid flow. A blowing velocity approach is used to simulate the displacement effects of the boundary layer. To predict the aerodynamic drag, it is developed a numerical technique called far-field method that is based on the momentum theorem, in which the total drag is divided into three component drags, i.e. viscous, induced and wave-formed. Consequently, it can provide more physical insight into the drag sources than the often-used surface integral technique. The drag decomposition can be achieved with help of the second law of thermodynamics, which implies that entropy increases and total pressure decreases only across shock wave along a streamline of an inviscid non-isentropic flow. This method has been applied to the DLR-F4 wing/body configuration showing results in good agreement with the wind tunnel data.     

区域运输规划模型系统

提出一种区域运输规划模型系统,以求从定量的角度,预测一个区域内的货物运输量,继而确定这些运输量对该区域内存在的多种运输方式的偏好结构,最后仿真这些运量在相应的各种运输网络上的分布情况,同时仿真模型还对运输网线路经过新建或扩建后所形成的新的运量分布进行模拟。根据运量分布情况,就可提出初步的规划建设方案。     

太阳能热推进系统效率分析

太阳能热推进采用小分子量气体作为推进剂可以获取800～900 s高比冲,但提高推进系统的换热效率是目前亟待解决的问题.本研究建立了太阳能热推进系统主要部件的基本分析模型,在利用有限单元法进行热分析的基础上,对系统在多种工况下的相关参数进行了计算,分析了各部件主要参数对提高太阳能热推进系统热效率和推进效率的影响,得出了系统效率在不同工作状态下的变化规律,并提出了提高系统效率的措施.