Astrometric positioning and orbit determination of geostationary satellites

In the project titled “Astrometric Positioning of Geostationary Satellite” (PASAGE), carried out by the Real Instituto y Observatorio de la Armada (ROA), optical observation techniques were developed to allow satellites to be located in the geostationary ring with angular accuracies of up to a few tenths of an arcsec. These techniques do not necessarily require the use of large telescopes or especially dark areas, and furthermore, because optical observation is a passive method, they could be directly applicable to the detection and monitoring of passive objects such as space debris in the geostationary ring.     

轻型通用飞机起飞总重估算方法研究

飞机的起飞总重是飞机的重要设计参数,概念设计阶段首先要做的重要工作之一就是确定飞机的起飞总重。以四人座低速活塞螺旋桨飞机为例,采用任务剖面法和商载航程法分别对起飞总重进行了估算,并对两种方法进行了修正,在此基础上,取两个计算结果的平均值作为最终的起飞总重估算值。通过与对比机型的比较,验证修正后的计算方法和结果是准确合理的,为通用飞机起飞总重的确定和选择提供了参考。     

用于光纤F-P声压传感器的直流补偿解调技术研究

提出了一种改进的双腔直流补偿技术,用于解调非本征法布里-珀罗干涉(EFPI)光纤传感器,以消除腔长差与入射光波长相匹配的要求。通过消除直流分量和校准信号相位,可以从具有任意相位差的原始信号中获 得两路正交信号。通过理论仿真,制作了具有不同腔长差的EFPI光纤传感器,对所提出的方法进行了试验验证。 结果表明,该方法在解调双 F P腔 EFPI传感器时,不需要保证初始相位差恒定,且对腔长漂移不敏感,具有良好的 稳定性和实用价值。     

Application of CCD drift-scan photoelectric technique on monitoring GEO satellites

Geosynchronous Earth Orbit (GEO) satellites are widely used because of their unique characteristics of high-orbit and remaining permanently in the same area of the sky. Precise monitoring of GEO satellites can provide a key reference for the judgment of satellite operation status, the capture and identification of targets, and the analysis of collision warning. The observation using ground-based optical telescopes plays an important role in the field of monitoring GEO targets. Different from distant celestial bodies, there is a relative movement between the GEO target and the background reference stars, which makes the conventional observation method limited for long focal length telescopes. CCD drift-scan photoelectric technique is applied on monitoring GEO targets. In the case of parking the telescope, the good round images of the background reference stars and the GEO target at the same sky region can be obtained through the alternating observation of CCD drift-scan mode and CCD stare mode, so as to improve the precision of celestial positioning for the GEO target. Observation experiments of GEO targets were carried out with 1.56-meter telescope of Shanghai Astronomical Observatory. The results show that the application of CCD drift-scan photoelectric technique makes the precision of observing the GEO target reach the level of 0.2″, which gives full play to the advantage of the long focal length of the telescope. The effect of orbit improvement based on multi-pass of observations is obvious and the prediction precision of extrapolating to 72-h is in the order of several arc seconds in azimuth and elevation.     

Development and verification of an innovative photomultiplier calibration system with a 10-fold increase in photometer resolution

In this study, we construct a photomultiplier calibration system. This calibration system can help scientists measuring and establishing the characteristic curve of the photon count versus light intensity. The system uses an innovative 10-fold optical attenuator to enable an optical power meter to calibrate photomultiplier tubes which have the resolution being much greater than that of the optical power meter. A simulation is firstly conducted to validate the feasibility of the system, and then the system construction, including optical design, circuit design, and software algorithm, is realized. The simulation generally agrees with measurement data of the constructed system, which are further used to establish the characteristic curve of the photon count versus light intensity.     

光学采样成像系统传递函数补偿的仿真研究

简要概述了光学采样成像系统组成及调制传递函数补偿(MTFC)概念;采用计算机仿真的方法模拟成像链路,MTFC是成像链路的一个重要环节,通过改变成像链路中的参数,研究链路中的混叠、光学遥感器噪声、量化、有损压缩对MTFC的影响。     

隔热层厚度和数量对太空多层光学窗口温度分布的影响

 航天器上常安装有用于科学观察的多层光学窗口,其温度分布的均匀性会影响成像质量。运用射线踪迹-节点分析法的任意多层镜反射辐射与导热耦合换热模型,研究了隔热层厚度及数量对太空中多层光学窗口温度分布的影响。光学窗口的吸收系数、折射率随波长的变化用一组矩形谱带来近似。研究显示太空中热辐射在光学窗口的冷却过程中起着非常重要的作用,在离玻璃层表面附近很薄的一层玻璃介质内,辐射与导热存在强烈的耦合作用。隔热层厚度越薄,其内的温度分布越均匀,有利于提高成像质量。隔热层数量越多,光学窗口各层玻璃的温度分布越均匀,有利于提高成像质量,但是隔热层最佳数量的确定还需综合考虑其它因素。     

一种光学遥感成像系统优化设计新方法研究

针对空间光学高分辨率遥感器,既要实现轻小型化,又要获得高品质遥感图像的要求,文章提出一种空间光学遥感成像系统优化设计新方法;综合考虑成像链路各环节因素,采用全面的指标设计和合理的优化设计流程来改进空间光学遥感成像系统的总体指标和成像品质,并显著降低遥感器的研制难度.通过比较全链路优化设计方法和传统设计方法的仿真结果及其...     

星间二维光CDMA系统方案及性能分析

为了充分利用星间光通信的丰富带宽，提出并设计了星间二维光CDMA系统方案。考虑背景光、多用户干扰、APD接收机噪声及热噪声，给出了星间二维光CDMA通信系统的系统模型。采用数值分析的方法，分析了该通信系统的误码率性能。结果表明：星间二维光CDMA通信系统易受多用户干扰、码速率以及背景光等因素的影响；通过合理的设计各种参数，在星间二维光CDMA通信系统中可以获得多用户、高数据速率的通信性能。     

航天飞机G417载荷研制及油滴与水滴接触微重力实验

文章介绍了曾经由航天飞机STS-64飞行任务搭载的编号为G417载荷的研制经验以及利用该载荷在航天飞机上开展的油滴与水滴接触微重力实验。北京卫星环境工程研究所承担了该载荷全部研制任务,其研制经验和飞行实验可为我国将来空间站开展微重力实验提供参考。