辐射源红外均匀性测量仪的研制

文章简要阐述红外均匀性测量仪的主要技术要求、工作原理和设计。设计中采用模块化组成方式 ,由两维精密位移及其测量装置、控制系统、前测光系统、光电测量系统、软件及微机组成     

捷联惯性导航系统姿态算法研究

用四元数和旋转矢量在捷联惯导系统中表示姿态矩阵,在圆锥运动的条件下,对旋转矢量算法进行了优化。对四元数、旋转矢量优化算法进行了仿真比较。仿真结果表明:等效旋转矢量算法明显优于四元数算法。     

基于GPS的低轨伴飞卫星自主导航轨道确定

对基于EKF算法的相对导航滤波器和基于全球卫星定位系统(GPS)伪距测量的伴飞星定轨进行了研究。用几何法与相对动力学方法联合获得目标星轨道信息,给出了伴飞卫星伪距测量定位的模型。仿真结果表明:该定轨方法可用于低轨卫星实时定位导航,定轨精度较高。     

超低轨道地球卫星脉冲星/星光折射/光谱组合导航

针对超低轨道地球卫星导航自主需求,提出了一种脉冲星/星光折射/光谱测速组合天文导航方法。首先根据地球超低轨道卫星运行轨道动力学方程建立导航系统状态模型;分别根据脉冲到达时间差和星光折射角与天体光谱频率建立导航系统量测模型;使用Unscented卡尔曼滤波方法,降低随机误差对导航精度的影响,使用基于UKF的信息融合方法,有效融合了三种天文导航方法结果数据。经计算机仿真分析,该组合导航方法位置导航误差均值为85.62m,速度误差均值0.190m/s,能够满足超低轨道地球卫星在轨运行导航需求。     

Microstructure and Optical Characterization of Magnetron Sputtered NbN Thin Films

Some fundamental studies on the preparation, structure and optical properties of NbN films were carried out. NbN thin films were deposited by DC reactive magnetron sputtering at different N2 partial pressures and different substrate temperatures ranging from –50 ℃ to 600 ℃. X-ray diffraction analysis (XRD) and scanning electron microscopy (SEM) were employed to characterize their phase com- ponents, microstructures, grain sizes and surface morphology. Optical properties inclusive of refractive indexes, extinction coefficients and transmittance of the NbN films under different sputtering conditions were measured. With the increase in the N2 partial pressure, δ-NbN phase structure gets forming and the grain size and lattice constant of the cubic NbN increasing. The deposited NbN film has relatively high values of refractive index and extinction coefficient in the wavelength ranging from 240 nm to 830 nm. Substrate tem- perature exerts notable influences on the microstructure and optical transmittance of the NbN films. The grain sizes of the δ-NbN film remarkably increase with the rise of the substrate temperature, while the transmittance of the films with the same thickness decreases. Ultra-fine granular film with particle size of several nanometers forms when the substrate is cooled to –50 ℃, and a remarkable aug- mentation of transmittance could be noticed under so low a temperature.     

Periodic Error Compensation for Quartz MEMS Gyroscope Drift of INS

In order to improve the navigation accuracy of an inertial navigation system （INS）, composed of quartz gyroscopes, the existing real-time compensation methods for periodic errors in quartz gyroscope drift and the periodic error term relationship between sampled original data and smoothed data are reviewed. On the base of the results, a new compensation method called using former period characteristics to compensate latter smoothness data （UFCL for short） method is proposed considering the INS working characteristics. This new method uses the original data without smoothing to work out an error conversion formula at the INS initial alignment time and then compensate the smoothed data errors by way of the formula at the navigation time. Both theoretical analysis and experimental results demonstrate that this method is able to cut down on computational time and raise the accuracy which makes it a better real-time compensation approach for periodic error terms of quartz micro electronic mechanical system （MEMS） gyroscope＇s zero drift.     

航天光学采样成像系统MTF的优化设计与MTFC

简要介绍了成像链、成像系统和遥感系统的概念;对像质和像质差异的表征和度量、成像系统性能的表征等予以说明;重点探讨航天光学采样成像系统MTF的优化设计与MTFC问题,并给出讨论结果。     

面向立方星的相对位姿测量视觉传感器设计

针对立方星在轨服务任务中的近距离相对导航问题,提出一种相对位姿测量视觉传感器设计.为应对空间复杂的光照条件,设计一种具有多层结构的立体靶标,选取波长为850nm的LED灯作为立体靶标的光源.在相机镜头处安装850nm的红外窄带滤镜以提高立体靶标成像质量.为提高视觉传感器的测量精度,提出一种迭代直接求解(iterativ...     

根据两颗导航星信息估计捷联惯导系统误差的一种方法

针对高机动短时间飞行的飞行器,介绍了一种根据它相对2颗导航卫星的伪距离和伪速度信息,估计捷联惯导系统定位和定速度误差的方法.考虑到由确定飞行器相对每颗星的径向距离和速度的非线性方程施加的约束,根据这些误差矢量长度最小值的条件确定误差值.用空间解析几何法得出了计算捷联惯导系统误差估值的最终算法,这种算法能给出非线性最小值问题的精确解.     

先进战斗机过失速机动大气数据融合估计方法

可控的过失速机动是先进战斗机超机动性能的重要标志,飞机飞行包线的扩大已超出传统的大气数据系统测量范围,可靠的迎角、侧滑角、总压、静压等飞行大气数据是制约先进战斗机过失速机动中飞行控制的关键因素。以中国推力矢量验证机为对象,基于过失速机动飞行试验的数据,开展大气参数估计与验证研究。结合过失速机动的时间与空间特性,研究了基于风速、地速、空速矢量和惯性姿态、导航参数的大气参数融合计算方法;针对过失速大迎角状态下飞机周围气流非定常、模型非线性导致的融合大气参数误差的复杂特性,进一步构建深度神经网络,对机动状态融合迎角、侧滑角的强非线性误差进行拟合。仿真和飞行试验表明：该方法可在大迎角飞行状态下实现主要大气参数的融合估计,过失速机动过程中融合迎角误差优于2.3°,融合得到的大气参数可为过失速大迎角机动飞行控制提供可靠的大气参数状态反馈。