基于立体视觉的孔探分析系统及其应用

孔探分析在现代航空发动机故障诊断中一直发挥着重要的作用，开发基于立体视觉的孔探分析系统，对提高故障诊断水平和预测准确度，节约发动机维护成本有着重要的现实意义，系统利用立体视觉技术以及图像处理技术，完成了对双目视觉左右图像的标定和匹配，实现了对实体表面的三维测量和立体重建，本文介绍了基于立体视觉的孔探分析系统的基本原理与主要功能，并结合应用实例验证了系统的有效性。     

用Radon变换迭代法重建含有遮挡物的三维折射率场

本文通过计算机模拟研究，结合气体折射率场的光验知识．考查了将Ｒａｄｏｎ变换迭代法用于光学干涉层析计量含有遮挡物的三维折射率场的重建精度。作为一个应用实例，测量和计算了某一截面的气体温度分布，并与热电偶测量的值进行了比较。     

彩色三维激光快速成型技术的研究

目前逆向工程采用线结构激光和一个彩色面阵CCD摄像机构成三维彩色扫描系统,彩色CCD摄像机分两次对被测物体成像,首先摄取物体的彩色图片,然后加用滤光片再摄取激光光平面上的三维信息.最后将两次获取的信息重叠,便可得到三维彩色信息.提出了激光光平面方程式三维测量方法,建立了相应的数学模型.研制成一套适用于彩色逆向工程流程,并进行了实验研究,给出了实验结果.     

提高CCD相机视觉定位度的算法研究

提出了一种提高利用CCD相机进行视觉定位的准确度的方法,对该方法的误差情况进行了分析,提出了减小误差影响的策略,对一个实例进行了研究,证明该方法可以极大地提高CCD相机的测量准确度.     

磁选态单束铯束管束光学参数的模拟计算和设计

为提高铯束管跃迁信号强度,在束光学参数设计中,用蒙特卡罗方法模拟计算铯原子通过率和未跃迁比例。通过改变模拟计算中的束光学参数,分析铯原子通过率、未跃迁比例和倍增器首极电流的变化趋势,得到了主要束光学参数的合理取值范围。在铯束管实际装配和试验中使用束光学参数设计结果,有效地增加了倍增器首极电流。     

Geometric calibration of Colour and Stereo Surface Imaging System of ESA’s Trace Gas Orbiter

There are many geometric calibration methods for “standard” cameras. These methods, however, cannot be used for the calibration of telescopes with large focal lengths and complex off-axis optics. Moreover, specialized calibration methods for the telescopes are scarce in literature. We describe the calibration method that we developed for the Colour and Stereo Surface Imaging System (CaSSIS) telescope, on board of the ExoMars Trace Gas Orbiter (TGO). Although our method is described in the context of CaSSIS, with camera-specific experiments, it is general and can be applied to other telescopes. We further encourage re-use of the proposed method by making our calibration code and data available on-line.     

Spectroscopy peculiarities of thermal plasma of electric arc discharge between electrodes with Zn admixtures

Plasma of the free burning electric arc between Ag–SnO₂–ZnO composite electrodes as well as brass electrodes were investigated. The plasma temperature distributions were obtained by Boltzmann plot method involving Cu I, Ag I or Zn I spectral line emissions. The electron density distributions were obtained from the width and from absolute intensity of spectral lines. The laser absorption spectroscopy was used for measurement of copper atom concentration in plasma. Plasma equilibrium composition was calculated using two independent groups of experimental values (temperature and copper atom concentration, temperature and electron density). It was found that plasma of the free burning electric arc between brass electrodes is in local thermodynamical equilibrium. The experimental verification of the spectroscopic data of Zn I spectral lines was carried out.     

A concept mission for the Stellar Population and Evolution with Cubesats (SPEC)

Binary or multiple stellar systems, constituting almost a third of the content of the Milky Way, represent a high priority astronomical target due to their repercussions on the stellar dynamical and evolutionary parameters. Moreover the spectral study of such class of stars allows to better constrain the evolutionary theories of the Galactic stellar populations. By resolving the members of stellar systems through photometric observations we are able to perform more detailed measurements to infer their mass. In this paper we investigate the feasibility of a cubesat based mission including an optical payload to directly optically discriminate the members of a selected sample of binary systems. The scientific targets, consisting 11?M class dwarf stars binary systems, have been extracted from the already studied Riaz catalogue. These subset has been selected considering the star distance, the members angular separation, and the distance from the Galactic plane (due to limit the background and foreground contamination). The satellite concept is based on a 6 unit Cubesat embedding some commercial off the shelf components and an ad hoc designed optical payload occupying almost 4 units. The optical configuration has been chosen in order to fit the angular resolution requirements, as derived from the target characteristics. Moreover, according to the optical analysis and the computed field of view some requirements on the attitude control system have been inferred and fulfilled by the component selection. The paper is organized as in the following: a brief scientific introduction is made; consequently the project is described with particular attention to the optical design and the standard sub-systems; finally the conclusions are drawn and the future perspectives are investigated.     

Advances in critical technologies for hypersonic and high-enthalpy wind tunnel

Hypersonic and high-enthalpy wind tunnels and their measurement techniques are the cornerstone of the hypersonic flight era that is a dream for human beings to fly faster, higher and further. The great progress has been achieved during the recent years and their critical technologies are still in an urgent need for further development. There are at least four kinds of hypersonic and high-enthalpy wind tunnels that are widely applied over the world and can be classified according to their operation modes. These wind tunnels are named as air-directly-heated hypersonic wind tunnel, light-gas-heated shock tunnel, free-piston-driven shock tunnel and detonation-driven shock tunnel, respectively. The critical technologies for developing the wind tunnels are introduced in this paper, and their merits and weakness are discussed based on wind tunnel performance evaluation. Measurement techniques especially developed for high-enthalpy flows are a part of the hypersonic wind tunnel technology because the flow is a chemically reacting gas motion and its diagnosis needs specially designed instruments. Three kinds of the measurement techniques considered to be of primary importance are introduced here, including the heat flux sensor, the aerodynamic balance, and optical diagnosis techniques. The techniques are developed usually for conventional wind tunnels, but further improved for hypersonic and high-enthalpy tunnels. The hypersonic ground test facilities have provided us with most of valuable experimental data on high-enthalpy flows and will play a more important role in hypersonic research area in the future. Therefore, several prospects for developing hypersonic and high-enthalpy wind tunnels are presented from our point of view.     

空间相机中与大口径透镜有关的结构设计分析

某空间相机镜头在光学设计时,因透过率、吸收率等原因,为了满足光学系统要求,经过各方面平衡后,其中有一片透镜比正常径厚比设计的偏薄些。在镜头总体结构设计时,单独对该镜片及与之相配的结构件进行了有限元分析和实验检测,发现不同的结构形式对镜片面形影响不同。为了解决这一问题,在实验中进行了探讨,以保证整个相机系统满足空间相机的实用要求。