Estimation of optical maturity parameter for lunar soil characterization using Moon Mineralogy Mapper (M3)

Prolonged exposure of the microscopic outer layer of the lunar surface to the space environment leads to the maturation of the surface. Maturation can be quantified and it may be expressed in terms of optical maturity (OMAT). Optical maturity estimations are very much helpful in the identification and mapping of the major minerals present on the lunar regolith. Estimation of the maturation and mineral mapping using remote sensing techniques are achieved, by coupling spectral reflectance of the lunar surface with an optimized origin. The present work estimates the optical maturity and Ferrous oxide content of the Goldschmidt and Schrodinger craters, through the recalibration of the classical method of Lucey et al. (2000a) with an origin of (0.08, 1.18) and Moon Mineralogy Mapper (M3) data. The overall recalibration results assure that the craters are highly matured.     

基于光外差法的宽带示波器滤波器频响测试技术研究CSCD

分析了光外差测试频响的原理,提出了采用光外差法测试宽带示波器滤波器频响的方案,分析了偏振态和波长稳定性对于测试结果的影响。实验结果表明,光外差法测试宽带示波器光电模块频响方案可行,9.953Gbps滤波器下测试,3d B带宽频率处频响重复性小于0.1d B。     

光学坐标测量机的搭建与实现CSCD

为了高速高精高效地完成中小型复杂型面零件的测量,基于激光位移传感器和三坐标测量机等搭建了非接触式的光学坐标测量机,从而将测量机和光学测头的优点结合起来以应对空间自由曲面的测量任务。通过测头标定技术获得测量光束所在直线的单位方向向量,进而将激光测头的一维距离值转化为测量光斑的三维坐标值,然后通过坐标系转换将此坐标值转化到统一的测量机坐标系下,进而完成被测曲面三维点云的创建。最后,对一个直径已知的球在10个不同方位进行测量,通过点云数据拟合球面方程得到其直径作为测量结果,所得各次测量结果的误差均小于0.05mm,充分说明所搭建的测量系统的有效性。     

高速摄像三维图像分析技术与应用

高速摄像是光学测量的重要手段。分析了高速摄像三维图像分析技术的处理过程,重点讨论了像机标定、自动目标检测与跟踪技术、多目标匹配技术和三维姿态测量技术等关键环节所面临的问题及解决方法,并以无人机回收测量系统为例说明了高速摄像三维图像分析技术在无人机位姿参数测量中的应用,对构建高速摄像测量系统提供了参考。     

带摆镜的制冷型中波红外像方扫描光学系统设计

基本形式的像方扫描光学系统依然需要复杂的二维回转机构带动成像镜组做二维扫描,所以二维回转机构需要承担较大载荷。分析了基本形式的像方扫描光学系统形式,并在基本形式基础上加入摆镜,只通过二维摆镜的旋转达到扫描像面的目的,大大减小二维回转机构载荷,提高扫描速度,简化了系统结构,减小了系统体积。加入摆镜后的光学系统除具有基本形式像方扫描光学系统的性质外,还有了新的限制条件,对带摆镜的像方扫描光学系统进行了分析,提出了设计条件及设计方法,并设计出具有较大视场的像方扫描光学系统。     

辐射源红外均匀性测量仪的研制

文章简要阐述红外均匀性测量仪的主要技术要求、工作原理和设计。设计中采用模块化组成方式 ,由两维精密位移及其测量装置、控制系统、前测光系统、光电测量系统、软件及微机组成     

Microstructure and Optical Characterization of Magnetron Sputtered NbN Thin Films

Some fundamental studies on the preparation, structure and optical properties of NbN films were carried out. NbN thin films were deposited by DC reactive magnetron sputtering at different N2 partial pressures and different substrate temperatures ranging from –50 ℃ to 600 ℃. X-ray diffraction analysis (XRD) and scanning electron microscopy (SEM) were employed to characterize their phase com- ponents, microstructures, grain sizes and surface morphology. Optical properties inclusive of refractive indexes, extinction coefficients and transmittance of the NbN films under different sputtering conditions were measured. With the increase in the N2 partial pressure, δ-NbN phase structure gets forming and the grain size and lattice constant of the cubic NbN increasing. The deposited NbN film has relatively high values of refractive index and extinction coefficient in the wavelength ranging from 240 nm to 830 nm. Substrate tem- perature exerts notable influences on the microstructure and optical transmittance of the NbN films. The grain sizes of the δ-NbN film remarkably increase with the rise of the substrate temperature, while the transmittance of the films with the same thickness decreases. Ultra-fine granular film with particle size of several nanometers forms when the substrate is cooled to –50 ℃, and a remarkable aug- mentation of transmittance could be noticed under so low a temperature.     

航天光学采样成像系统MTF的优化设计与MTFC

简要介绍了成像链、成像系统和遥感系统的概念;对像质和像质差异的表征和度量、成像系统性能的表征等予以说明;重点探讨航天光学采样成像系统MTF的优化设计与MTFC问题,并给出讨论结果。     

基于发射光谱法的螺旋波电推进器等离子体源放电实验研究

为探究不同气体条件下螺旋波电推进器等离子体源的放电特征,开展了氩气、氦气和氮气放电的光谱诊断实验研究。氩气和氦气为工质气体的放电条件下,部分波长谱线相对强度随功率的增加而增强,且斜率出现两次跳变,考虑是螺旋波放电过程中的模式转换,即容性向感性、感性向波模式的转换。三种工质气体,在较低的压强下,各谱线强度均随压强增大而迅速增强,但氩气放电下压强继续增大达到1.0Pa以后,谱线强度增强趋势变缓甚至达到“饱和”状态,而氦气和氮气放电下压强增大到0.5~0.65Pa,谱线强度出现降低趋势,氦气和氮气放电强度对压强更为敏感。     

吸气模式激光推进空气等离子体光谱

利用实验室自行研制的紫外预电离CO2激光器进行了激光等离子体实验,实验采用底面直径均为60mm,焦距分别为5 mm和10 mm的两种抛物面光船。介绍了激光等离子体光谱和明显的特征谱线,以及激光等离子体温度估计模型;分析了两种光船对激光等离子体的影响。实验表明:相同底面直径10 mm焦距光船产生的等离子体信号峰值和持续时间均略大于5 mm焦距光船;10 mm焦距光船产生的等离子体温度明显高于5 mm的,最大温度产生时间比5 mm光船要晚一些。