Advances in critical technologies for hypersonic and high-enthalpy wind tunnel

Hypersonic and high-enthalpy wind tunnels and their measurement techniques are the cornerstone of the hypersonic flight era that is a dream for human beings to fly faster, higher and further. The great progress has been achieved during the recent years and their critical technologies are still in an urgent need for further development. There are at least four kinds of hypersonic and high-enthalpy wind tunnels that are widely applied over the world and can be classified according to their operation modes. These wind tunnels are named as air-directly-heated hypersonic wind tunnel, light-gas-heated shock tunnel, free-piston-driven shock tunnel and detonation-driven shock tunnel, respectively. The critical technologies for developing the wind tunnels are introduced in this paper, and their merits and weakness are discussed based on wind tunnel performance evaluation. Measurement techniques especially developed for high-enthalpy flows are a part of the hypersonic wind tunnel technology because the flow is a chemically reacting gas motion and its diagnosis needs specially designed instruments. Three kinds of the measurement techniques considered to be of primary importance are introduced here, including the heat flux sensor, the aerodynamic balance, and optical diagnosis techniques. The techniques are developed usually for conventional wind tunnels, but further improved for hypersonic and high-enthalpy tunnels. The hypersonic ground test facilities have provided us with most of valuable experimental data on high-enthalpy flows and will play a more important role in hypersonic research area in the future. Therefore, several prospects for developing hypersonic and high-enthalpy wind tunnels are presented from our point of view.     

基于过渡工作过程的航空发动机气路分析方法

为对发动机机动性能的退化程度进行估计,开展了基于过渡工作过程的气路分析研究。针对气路传感器数目较少的情况,采用序列工作点方法对大量的健康参数进行分析,在增加可用信息量的同时,降低了由多工作点方法的平均效应引入的参数估计系统误差。为解决发动机大偏差性能退化健康参数估计中的计算收敛性问题,提出了间接递归牛顿-拉夫逊法强化非支配分类差分进化算法。针对某型双轴分排涡扇发动机的气路分析结果表明：采用本文所提出的方法能够在气路传感器数目有限的条件下,利用发动机过渡态数据实现对大偏差范围内大量健康参数的高效、准确估计。     

Reliability and global sensitivity analysis for an airplane slat mechanism considering wear degradation

This paper focuses on the issue of reliability and global sensitivity analysis for an airplane slat mechanism considering the uncertainties in the wear process of mechanical components. First, the multi-body kinematic model of the slat mechanism is built in the ADAMS software. The geometrical sizes of the roller wheels after wear degradation are considered as input variables and the angle the slat should turn is considered as the output response. To accurately identify the influential roller wheels to the reliability and robustness of the slat mechanism, the failure probability based sensitivity and variance-based sensitivity indices are introduced. Comprehensive analysis of the results have shown that the reliability analysis and global sensitivity theory can help engineers find significant parts by their contributions, thus provide guidance for mechanical design and maintenance.     

基于健康蜕化的航空发动机传感器故障诊断(英文)

改进在线故障诊断算法使其能适应发动机健康蜕化是目前故障诊断所面临的困难,如果诊断算法没有自适应能力,在发动机健康蜕化后将失去其诊断功能。为了解决此问题,提出在线故障诊断算法,采用跟踪滤波器估计发动机的健康状况,机载模型根据跟踪滤波器的估计结果进行更新。更新后的机载模型能够与真实的发动机相匹配。这使得当发动机健康蜕化后在线故障诊断仍能保持其有效性。最后采用一组卡尔曼滤波器来对航空发动机传感器故障进行诊断与隔离。通过设计好的一组卡尔曼滤波器,能够诊断并隔离出故障。本文使用非线性发动机模型来验证此方法,仿真结果表明本文提出的在线诊断方法在发动机健康蜕化后仍能保持其有效性。     

AZ31镁合金早期力学性能退化非线性超声检测

针对镁合金材料早期力学性能退化问题,研究发展了一套可靠的非线性超声系数的测量实验系统,利用该系统测量了AZ31镁合金拉伸和疲劳试件的超声非线性系数.实验结果表明,在拉伸试件进入塑性应变阶段,疲劳试件在疲劳寿命的55%左右之前,超声非线性系数对镁合金材料力学性能退化具有很高的灵敏度.同时利用光学显微镜对拉伸试件的位错滑移...     

基于加速退化试验和粒子滤波的电子设备故障预测方法

针对导弹电子设备故障预测问题,提出了一种基于综合环境加速退化试验(ADT)和粒子滤波的故障预测新方法。首先,不同于传统的ADT方案,仅以单个样本为试验对象,采用步进加速的思想,将性能退化理论拓展为加速性能退化理论(APDT),建立基于电子设备寿命退化速度的加速寿命退化模型。其次,为克服环境应力等测试不确定性因素对预测精度的影响,定义了电子设备退化度的概念,将寿命预测的不确定性问题转化为设备退化度最优估计问题,利用改进粒子滤波算法求解出电子产品动态退化的最优估计值,进而实现设备的全寿命评估。最后,实例说明该方法可行、有效,并大大提高了试验的效费比。     

光学镜体用铍材及其尺寸稳定性

文中评述了铍材用作光学镜体的优越性及其发展状部况,讨论了影响铍镜尺寸稳定 因素及提高尺寸稳定性的可能途径。     

吸气模式激光推进空气等离子体光谱

利用实验室自行研制的紫外预电离CO2激光器进行了激光等离子体实验,实验采用底面直径均为60mm,焦距分别为5 mm和10 mm的两种抛物面光船。介绍了激光等离子体光谱和明显的特征谱线,以及激光等离子体温度估计模型;分析了两种光船对激光等离子体的影响。实验表明:相同底面直径10 mm焦距光船产生的等离子体信号峰值和持续时间均略大于5 mm焦距光船;10 mm焦距光船产生的等离子体温度明显高于5 mm的,最大温度产生时间比5 mm光船要晚一些。     

耐高温有机硅树脂的合成及其耐热和固化性能研究

以甲基和苯基氯硅烷为单体,采用水解缩聚的方法合成有机硅树脂,并对影响有机硅树脂合成的有关因素进行了研究。结果表明,当水解温度为70℃,控制水用量n(H2O)／n(c1)在8:1-5:1的范围内时,可合成出易溶于甲苯的有机硅树脂。红外光谱(IR)显示,合成的硅树脂含有端羟基。采用热失重法(TG)、热失重的微分曲线法(DTG)和马弗炉烧蚀试验研究有机硅树脂耐的热性能和室温固化性能,并对KH-CL和三乙醇胺两种室温固化剂对硅树脂的耐热性能的影响进行了对比研究。结果表明,在氩气气氛下,硅树脂具有很高的耐热性能,它的起始分解温度为400℃,热失重主要由400-500℃时"解扣式"降解和500℃之后的"重排"降解引起。但在空气气氛下,由于有机基团的氧化分解,硅树脂的耐热性有所下降。KH-CL可使硅树脂在室温条件下固化,固化后硅树脂的耐热性能提高。     

刘家峡右岸水电站模型试验的光路布置

使用二维激光多普勒测速仪（ＬＤＶ）对圆管中水注流进行测速时,对于窗口的设置、利用反射镜前向接收的方法和侧向接收方式等问题,本文进行了探讨,并总结了测量中的一些实际经验。