星地激光时间比对在卫星导航系统中的应用

星地精密激光时间比对具有精度高、系统误差少等优点,因此利用星地精密激光时间比对,不但可以对无线电时间比对进行外部精度检验,而且可以检验并分离无线电伪距测量的系统误差,分析检测设备时延的不稳定性和卫星钟的中短期性能指标,提高卫星钟差的预报精度。     

Beacon Monitoring: Reducing the Cost of Nominal Spacecraft Operations

Beacon monitoring is an architecture for augmenting on-board health assessment software with the following elements: a transmitter that periodically broadcasts this health assessment to the ground, a network of globally distributed low-cost monitoring stations that relays the health assessment to mission control, and an automated mission control system for notifying on-call operators and initiating appropriate response actions. While beacon monitoring is often cited as a means of lowering nominal monitoring costs for particular missions, these claims have typically been qualitative and undiscriminating in nature. This study introduces modeling and experimentation as means of providing a more fundamental validation of the cost-effectiveness of beacon monitoring. Results include simple quantitative estimates of first-order performance metrics, experimental data that verifies predicted performance and validates the use of beacon monitoring for a test mission, and a method for assessing the value of beacon monitoring for general satellites missions.     

我国早期原子钟研制历程回顾

“2019全国时间频率学术会议”是由四个专业委员会联合每两年举办一次的20周年纪念会。20年来，我国原子钟事业已有长足发展，成为世界上原子钟研制与开发的大国。但总体上说，我们的工作还是以跟随为主，真正属于自主创新的较少。不改变这种局面，我们还难以成为独立自主的时间频率强国，为国家经济和国防建设作出应有贡献。本文回顾了我国原子钟研发的情况，提到一些从基础研究上属于原始创新的案例。阐述了这些案例是在简陋的实验条件下依靠对原子钟内各类实验现象进行深入的物理分析基础上出现的。同时，也指出了在比较粗糙的工艺条件下实现精细的技术指标中能工巧匠所起的特殊作用。文章也约略提到国内各单位间无私协作的崇高精神。本文将讲述一些故事，并就原子钟产业的问题表示一点看法。中国要实现“强国梦”，阻力和困难还很多很艰巨，我们必须拥有丰富的原始创新来加以克服。为此，坚韧的奋斗钻研精神和传统仍不失借鉴与继承意义。     

四极－十六极分区式线型阱中汞离子囚禁仿真研究

利用SIMION软件建立了四极-十六极分区式线型离子阱系统模型，在此基础上仿真模拟了汞离子在四极阱和十六极阱中被囚禁时的第一稳定区，并分析了离子在不同阱中的运动特性。研究了汞离子云在分区式阱中的囚禁体积和速度分布，以及在不同囚禁区域之间的穿梭过程。模拟得出了稳态情况下分区式阱中不同囚禁区域的粒子数密度分布，验证了分区式离子阱中离子云被连续囚禁、穿梭时粒子数衰减和补偿。同时，根据以上数据分析讨论了汞离子囚禁时的多普勒效应，估算了基于此分区式离子阱的汞离子微波钟的性能水平。     

GNSS global real-time augmentation positioning: Real-time precise satellite clock estimation,prototype system construction and performance analysis

Lots of ambiguities in un-differenced (UD) model lead to lower calculation efficiency, which isn’t appropriate for the high-frequency real-time GNSS clock estimation, like 1 Hz. Mixed differenced model fusing UD pseudo-range and epoch-differenced (ED) phase observations has been introduced into real-time clock estimation. In this contribution, we extend the mixed differenced model for realizing multi-GNSS real-time clock high-frequency updating and a rigorous comparison and analysis on same conditions are performed to achieve the best real-time clock estimation performance taking the efficiency, accuracy, consistency and reliability into consideration. Based on the multi-GNSS real-time data streams provided by multi-GNSS Experiment (MGEX) and Wuhan University, GPS + BeiDou + Galileo global real-time augmentation positioning prototype system is designed and constructed, including real-time precise orbit determination, real-time precise clock estimation, real-time Precise Point Positioning (RT-PPP) and real-time Standard Point Positioning (RT-SPP). The statistical analysis of the 6 h-predicted real-time orbits shows that the root mean square (RMS) in radial direction is about 1–5 cm for GPS, Beidou MEO and Galileo satellites and about 10 cm for Beidou GEO and IGSO satellites. Using the mixed differenced estimation model, the prototype system can realize high-efficient real-time satellite absolute clock estimation with no constant clock-bias and can be used for high-frequency augmentation message updating (such as 1 Hz). The real-time augmentation message signal-in-space ranging error (SISRE), a comprehensive accuracy of orbit and clock and effecting the users’ actual positioning performance, is introduced to evaluate and analyze the performance of GPS + BeiDou + Galileo global real-time augmentation positioning system. The statistical analysis of real-time augmentation message SISRE is about 4–7 cm for GPS, whlile 10 cm for Beidou IGSO/MEO, Galileo and about 30 cm for BeiDou GEO satellites. The real-time positioning results prove that the GPS + BeiDou + Galileo RT-PPP comparing to GPS-only can effectively accelerate convergence time by about 60%, improve the positioning accuracy by about 30% and obtain averaged RMS 4 cm in horizontal and 6 cm in vertical; additionally RT-SPP accuracy in the prototype system can realize positioning accuracy with about averaged RMS 1 m in horizontal and 1.5–2 m in vertical, which are improved by 60% and 70% to SPP based on broadcast ephemeris, respectively.     

集成式伺服作动器压力损失特性及其影响因素

针对集成式伺服作动器液压回路的特点和选择切换功能，分析了能源切换原理、选择活门的压力损失规律及其对作动器活塞运动速度的影响。电磁阀通过控制选择活门阀芯的位置以实现不同能源的切换。分析了选择活门压力损失的成因分布与特征。由分析可知，流道结构突变处的局部损失占比最大，沿程损失可忽略不计，选择活门压力损失与流入流量的平方呈比例关系。同时，拟合出了活塞伸出运动和收缩运动时的压力损失经验系数。建立了作动器左右腔流量、压力和活塞动力学模型，发现某型选择活门压力损失使作动器活塞伸出速度下降了4.9%，收缩速度下降了5.2%。由于活塞受力情况一致，选择活门的压力损失不影响负载力与活塞速度的关系，速度下降比例与负载力无关；阀芯开度直接影响着流经系统流量，系统流量影响着流体与流道的撞击强度和频率，进而影响了选择活门的压力损失程度，速度下降百分比随阀芯开度增大而增大。分析结果可为高可靠性、高精度航空作动器伺服控制系统的设计提供技术支持。     

异地遥测对接可行性探究

针对现有飞行器测控系统遥测对接试验周期长、效率低的不足,提出一种异地遥测对接方法.通过构建异地遥测对接系统结构,得到异地遥测对接信号链路模型.基于系统时钟抖动的频率、相位和采样时间表达形式,对异地遥测对接链路中的信号进行了具体推导.在此基础上,从频率和相位2个方面,定量分析了系统时钟抖动对异地遥测对接信号相参性的影响.分析结果表明：对于Ka频段信号,当应答机端异地遥测对接系统的时钟短期频率稳定度优于1×10^-11时,异地遥测对接系统引入的频率抖动△f≤0.6 Hz,相位抖动△φ≤0.075 rad,可认为异地遥测对接信号的相参性不受影响,异地遥测对接可行.     

CPT原子钟系统光源温度控制设计与实现

介绍了半导体激光器波长影响机理,针对相干布局数囚禁（CPT）原子钟系统光源,设计并制作了通过半导体激光器的温度稳定的电路。实验结果表明,采用此电路的激光器,其温度稳定度约为0.02℃,相应波长稳定度可达0.001 2 nm。     

原子钟长期特性测量系统的设计与实现

通过在对各种时频测量硬件的搭建,建立一套多台被测原子钟同时与本地频率标准钟比对的测量系统。该系统以数据库服务做为最底层的数据支持,能够实时的监控测量数据,显示当前被测原子钟的频率准确度,并能够在获得了足够的数据之后,计算和显示被测原子钟的日稳和漂移数据和曲线,方便时频计量人员操作,提高了送检原子钟的计量检定效率。     

SpaceWire星载网络通信协议设计

SpaceWire是ESA和NASA推荐的新一代星载数据总线标准,其应用方向之一是构建统一总线星载网络。星载网络是典型的实时系统,它对网络信息的传输时延具有严格要求。然而,传统SpaceWire网络多源、异步、事件触发的特性使它难以提供确定的信息传输时延,这制约了它在统一总线星载网络中的应用。本文为克服SpaceWire的上述应用瓶颈,提出一种基于时间触发的SpaceWire星载网络通信协议,并提出相应的节点通信调度算法,通过合理的规划使节点在确定的时间窗口发送通信数据,从而避免了网络资源冲突,使信息传输时延的确定性得到保证。