改性小推力液体发动机推力室工作过程仿真

在考虑N2O4/一甲基肼(MMH)自燃推进剂雾化、蒸发和化学反应过程的条件下,采用贴体网格系统和耦合显式求解算法,仿真计算了小推力液体发动机不同喷嘴设计对推进剂的蒸发、混合燃烧、推力室内流场和燃烧室效率的影响。仿真结果与高空热试车数据基本一致。所用模型合理,具一定的参考价值。     

三维侧压高超声速进气道不启动流场试验与数值模拟研究

对某构型三维侧压高超声速进气道开展了Ma4的自由射流试验和数值仿真,研究 了低马赫数下不启动流场的流动机理。观测到了具有“对涡”结构的底板油流图案,并得到 了分离区的范围和内部流动特征。分析得出,“对涡”结构油流图案和流场中部分离区的形 成是唇口激波和内收缩形成的逆压梯度作用于侧板激波形成的流场中部低能流区的结果。根 据试验和数值模拟结果给出了流场结构示意图,并为下一步进气道构形设计和性能改善工作 提出了建议。     

缺陷对高温合金蜂窝板弯曲力学性能的影响

采用预埋缺陷的方法,制备含有面芯脱焊缺陷的高温合金蜂窝板,进行了三点弯曲试验,研究了缺陷形状、大小、位置和蜂窝芯取向对蜂窝板三点弯曲损伤模式和承载能力的影响.研究发现,含面芯脱焊缺陷的蜂窝板在缺陷受压部位产生反向鼓包,并沿着宽度方向扩展为完全破坏;随着缺陷尺寸的增大,蜂窝板承载能力逐渐降低;当缺陷位于三点弯曲受拉面时,蜂窝板具有更高的三点弯曲极限载荷,且矩形缺陷试样的弯曲极限载荷要高于相同缺陷面积的圆形试样.最后,利用LS-DYNA对含圆形缺陷高温合金蜂窝板的三点弯曲性能进行了数值模拟分析,得到其三点弯曲过程中的应力分布状态.     

数值仿真技术在热真空试验中的应用

由于热真空试验中温度测点有限,且关键部位布置困难,不能反映试验过程部件整体和关键部位的温度结果,导致试验有效性和产品安全性难以判断。通过数值仿真技术对试验过程进行模拟,得到所有部件详细温度场,验证试验有效性与产品安全性;发现影响产品温度分布的因素,研究提高产品可靠性措施。通过对某天线热真空试验过程模拟,得到天线详细温度场,并发现产品散热板安装＂不紧密＂缺陷,是影响天线温度均匀性的＂关键点＂。     

Geomagnetic activity driven by solar wind turbulence

Within the framework of the solar wind—magnetosphere coupled system, intense perturbations in the solar wind, causing geomagnetic storms and substorms, have been widely studied by means of the so-called coupling parameters. However, remarkable variations in the geomagnetic field occur even in absence of such perturbations. In those conditions, solar wind MHD turbulence might have a role. Recent results have shown that solar wind turbulence can be described not only as a mixture of inward and outward stochastic Alfvénic fluctuations, but includes also advected structures, dominated by an excess of magnetic energy.     

Numerical simulation of a rotary engine primary compressor impacted by bird

In order to examine the process of a rotary engine primary compressor impacted by bird, a finite element model of a bird impacted on plate is developed with the explicit code PAM-CRASH. The smooth particles hydrodynamic (SPH) method is used to simulate the bird because of the SPH method showing no signs of instability and correctly modeling the breaking-up of the bird into particles. Good agreement between the simulation results and experimental results indicates that the numerical method of bird strike used in the present paper is reasonable. Then a rotary engine primary compressor impacted by three different configurations bird named straight-ended cylinder bird, quadrangular bird, hemispherical-ended bird are investigated using the numerical simulation method. It is found that the whole process of bird strike sustained about 3.5 ms and the bird is slashed by blade during the strike. The geometry configuration of bird affected the displacement and von Mises stress of some blades severely, just because the breaking bird’s mass is affected by the bird’s configuration. In the event of bird striking on the site of"up"some blades may develop plastic deformation and it is very adverse for the safety work of the engine.     

Propagation and interaction of interplanetary transient disturbances. Numerical simulations

We study the heliocentric evolution of ICME-like disturbances and their associated transient forward shocks (TFSs) propagating in the interplanetary (IP) medium comparing the solutions of a hydrodynamic (HD) and magnetohydrodynamic (MHD) models using the ZEUS-3D code [Stone, J.M., Norman, M.L., 1992. Zeus-2d: a radiation magnetohydrodynamics code for astrophysical flows in two space dimensions. i – the hydrodynamic algorithms and tests. Astrophysical Journal Supplement Series 80, 753–790]. The simulations show that when a fast ICME and its associated IP shock propagate in the inner heliosphere they have an initial phase of about quasi-constant propagation speed (small deceleration) followed, after a critical distance (deflection point), by an exponential deceleration. By combining white light coronograph and interplanetary scintillation (IPS) measurements of ICMEs propagating within 1 AU [Manoharan, P.K., 2005. Evolution of coronal mass ejections in the inner heliosphere: a study using white-light and scintillation images. Solar Physics 235 (1–2), 345–368], such a critical distance and deceleration has already been inferred observationally. In addition, we also address the interaction between two ICME-like disturbances: a fast ICME 2 overtaking a previously launched slower ICME 1. After interaction, the leading ICME 1 accelerates and the tracking ICME 2 decelerates and both ICMEs tend to arrive at 1 AU having similar speeds. The 2-D HD and MHD models show similar qualitative results for the evolution and interaction of these disturbances in the IP medium.     

自然通风和蒸发冷却在新疆建筑应用的数值分析

为了使新疆和田地区夏季在经济性合理前提下使室内通风环境满足人体热舒适要求。利用蒸发冷却技术将室外空气处理后送入室内，通过数值模拟分析得出在夏季室内负荷最大时刻采用机械辅助式自然通风，使得室温能够雏持在26-8℃，风速为0．6m/s，基本满足人体热舒适要求。在室外温度适宜的过渡季节采用Trombe墙和太阳能烟囱复合的自然通风系统，建筑太阳能烟囱的经济高度为10m。     

基于MATLAB/Simulink的飞机燃油箱内燃油温度仿真计算

燃油温度是飞机燃油箱可燃性评估的关键参数之一。为了研究飞机燃油箱内温度的分布规律及传热模型的正确性,采用MATLAB/Simulink软件平台搭建出了客机的燃油箱热仿真模型。在输入飞行实验所对应的的边界条件后,通过数值模拟获得燃油箱内部各计算节点处的燃油温度。结果表明,在三种不同的航行条件下,燃油箱热模型仿真结果均能较好地与飞行实验结果吻合,能够将计算误差控制在一定范围内。采用该燃油箱热模型进行热仿真数值模拟可以获得较为准确的飞机燃油箱热特性,能够在飞机设计阶段,用于对燃油箱结构以及内热源部件布置的优化。     

Transient simulation of regression rate on thrust regulation process in hybrid rocket motor

The main goal of this paper is to study the characteristics of regression rate of solid grain during thrust regulation process. For this purpose, an unsteady numerical model of regression rate is established. Gas–solid coupling is considered between the solid grain surface and combustion gas.Dynamic mesh is used to simulate the regression process of the solid fuel surface. Based on this model, numerical simulations on a H2O2/HTPB(hydroxyl-terminated polybutadiene) hybrid motor have been performed in the flow control process. The simulation results show that under the step change of the oxidizer mass flow rate condition, the regression rate cannot reach a stable value instantly because the flow field requires a short time period to adjust. The regression rate increases with the linear gain of oxidizer mass flow rate, and has a higher slope than the relative inlet function of oxidizer flow rate. A shorter regulation time can cause a higher regression rate during regulation process. The results also show that transient calculation can better simulate the instantaneous regression rate in the operation process.