对地观测卫星姿态非线性控制方法

针对对地观测卫星姿态控制系统 ,着重考虑干扰、噪声对卫星姿态稳定度的影响。忽略耦合和挠性部件影响 ,也不考虑敏感器和执行机构的动态特性 ,针对卫星定向模式的主调节器设计问题构造了一种简单实用的非线性控制器 ,并分析和验证了该非线性控制器的有效性。     

Ionospheric Effects of Geomagnetic Storms in Different Longitude Sectors

This paper analyzes the state of the ionosphere during two geomagnetic storms of a different intensity evolving in different sectors of local time in different seasons. There were used the data from a network of ionospheric stations located in the opposite longitudinal sectors of 80°-150° E and 250°-310° E.This analysis has permitted us to conclude that the detected differences in the variations of the disturbances are likely to be determined by the local time difference of the geomagnetic storm development, its intensity and by the different illumination conditions of the ionosphere.      

Powered-descent trajectory optimization scheme for Mars landing

This paper presents a trajectory optimization scheme for powered-descent phase of Mars landing with considerations of disturbance. Firstly, θ–D$\theta ''–''D$ method is applied to design a suboptimal control law with descent model in the absence of disturbance. Secondly, disturbance is estimated by disturbance observer, and the disturbance estimation is as feedforward compensation. Then, semi-global stability analysis of the composite controller consisting of the nonlinear suboptimal controller and the disturbance feedforward compensation is proposed. Finally, to verify the effectiveness of proposed control scheme, an application including relevant simulations on a Mars landing mission is demonstrated.     

直线电机位置伺服系统的增强复合非线性控制

针对高性能机电系统中常用的直线伺服电机,设计了一个能实现快速与准确的定点运动的位置控制器。控制器采用线性控制律与平滑非线性控制律相结合的方案,并利用一个降阶线性状态观测器对电机运动速度(未量测)加以估计。为了消除未知扰动带来的稳态误差,控制律中嵌入了积分控制作用。整个控制律采用全参数化设计,可实现动态增益控制,方便了在线参数整定与性能优化。控制方案应用于一个实际的永磁直线电机位置伺服系统,基于TMS320F28335 DSC进行了试验测试,结果表明系统能对各目标位置进行准确的跟踪,且具有理想的瞬态性能。     

A CFD-based numerical virtual flight simulator and its application in control law design of a maneuverable missile model

A CFD-based Numerical Virtual Flight (NVF) simulator is presented, which integrates an unsteady flow solver on moving hybrid grids, a Rigid-Body Dynamics (RBD) solver and a module of the Flight Control System (FCS). A technique of dynamic hybrid grids is developed to control the active control surfaces with body morphing, with a technique of parallel unstructured dynamic overlapping grids generating proper moving grids over the deflecting control surfaces (e.g. the afterbody rudders of a missile). For the flow/kinematic coupled problems, the 6 Degree-Of-Freedom (DOF) equations are solved by an explicit or implicit method coupled with the URANS CFD solver. The module of the control law is explicitly coupled into the NVF simulator and then improved by the simulation of the pitching maneuver process of a maneuverable missile model. A nonlinear dynamic inversion method is then implemented to design the control law for the pitching process of the maneuverable missile model. Simulations and analysis of the pitching maneuver process are carried out by the NVF simulator to improve the flight control law. Higher control response performance is obtained by adjusting the gain factors and adding an integrator into the control loop.     

基于滑模变结构和扩张状态观测器的电动舵机复合控制方法

为提高电动舵机伺服系统的鲁棒性,同时解决实际工作中电动舵机不确定负载引起的跟踪精度低的问题,提出了一种采用指数趋近率的滑模变结构控制率结合扩张状态观测器对负载扰动进行实时估计的电动舵机的伺服控制方法,给出了控制器设计方法和试验验证。仿真和试验结果表明,与常规的滑模控制器相比,采用扩张状态观测器的变结构控制能有效提高电动舵机的跟踪性能。     

基于协作机械臂的航电开关柔性检测算法

在基于协作机械臂的航电联调联试系统中,为了解决机械臂在检测航电开关时存在环境复杂、需要适应不同种类开关与定位误差等问题,提出了两种基于关节力传感器的航电开关柔性检测算法,用来检测航电联试环境中主要的3大类开关.基于外力阈值检测的接触定位与操作算法,通过广义动量观测器估计末端外力,并在控制机械臂运动时设置操作力阈值,实现...     

考虑随机干扰的高超声速滑翔飞行器轨迹优化

为解决高超声速滑翔式飞行器具有干扰不确定性的再入轨迹优化问题,提出了一种基于广义正交多项式方法的随机轨迹优化数值求解方法。针对随机干扰,基于广义正交多项式方式对其分布进行采样,形成采样空间,而后将每个采样值代入确定性轨迹优化问题中进行反复迭代求解,得出观测值的样本空间,并计算其期望、方差和协方差,估计输出值。以最大纵程为代价函数对具有随机干扰的高超声速滑翔式飞行器最优轨迹进行了数字仿真。仿真结果表明,基于广义正交多项式的随机轨迹优化方法能够有效处理随机干扰对轨迹优化问题的影响,与蒙特卡洛法相比计算效率大大提高。     

基于Riccati方程解的高增益未知输入观测器设计

针对具有未知输入和测量噪声的一类Lipschitz非线性系统,研究了状态估计、噪声估计及未知输入重构问题.通过将输出噪声看作扩展状态,把原系统转化为描述系统.针对描述系统,首先基于Riccati方程的解,提出了一种高增益观测器设计方法,实现对系统状态的估计和测量噪声的重构;之后,设计二阶高增益滑模观测器精确估计输出的微分,并利用状态和输出微分的估计,提出了一种未知输入的重构方法.在一Riccati方程有解的前提下,所提出的未知输入和测量噪声的重构,均适用于强时变信号.最后,对一个实际模型仿真,验证所提出方法的有效性.      

液体晃动非线性阻尼的描述方法

采用等效线性化手段研究了液体晃动非线性阻尼特性的描述方法，给出了自由衰减响应的对数衰减率与非线性阻尼比之间的关系，提出了通过自由衰减响应确定非线性阻尼特性参数的两种方法。计算表明，两种方法所得到的结果可以满足工程应用所要求的精度。