基于滑模干扰观测器的高超声速飞行器滑模控制

首先,针对存在外部干扰和输入饱和的通用式高超声速飞行器的纵向动态模型,提出一种基于滑模干扰观测器的抗饱和滑模控制器。该滑模控制器采用非线性趋近律,在保证系统快速、稳定跟踪指令的同时,能够消除传统滑模控制中的抖振现象,并针对执行器饱和问题,加入抗饱和补偿器,以提高系统的稳定性。其次,对于系统中存在的干扰和不确定性,提出一种滑模干扰观测器,用以准确估计系统中存在的等效干扰,并将该观测器对干扰的估计值应用于滑模控制器中进行补偿,以消除干扰。再次,利用Lyapunov理论对所提出的基于滑模干扰观测器的抗饱和滑模控制器进行稳定性分析。最后,对高超声速飞行器的巡航状态进行仿真。仿真结果表明,所提方法能够有效提高系统的稳定性和抗干扰性,具有一定的实际应用价值。     

旋翼非定常气动特性CFD模拟的通用运动嵌套网格方法

针对直升机旋翼非定常气动特性CFD模拟中的网格生成难题,提出了一套高效、通用的运动嵌套网格生成方法.首先,基于Poisson方程求解和翻折法生成旋翼桨叶的正交贴体网格.其次,针对旋翼桨叶的扭转分布及变距、挥舞等复杂运动,建立了一套通用的洞单元识别的扰动衍射法;为保证洞包络面的封闭性,完善了挖洞过程中网格加密策略;在洞边界确立基础上,提出了一种高效、鲁棒的最小距离法贡献单元搜索的改进方法.在此基础上,建立了基于RANS(Reynolds-averaged Navier-Stokes)方程的旋翼非定常流场CFD模拟方法.最后,采用所建立的方法分别对悬停和前飞状态下的C-T(Caradonna-Tung)旋翼和7A(Helishape 7A)旋翼的气动特性、桨尖涡的位置进行了计算,计算结果与试验值误差小于5%,验证了该运动嵌套网格生成方法在旋翼非定常气动特性CFD模拟中的有效性.      

基于干扰观测器的高超声速飞行器预测控制器设计

针对具有强耦合特性与模型不确定性特点的高超声飞行器控制问题,提出一种新型的姿态预测控制器设计方法。引入参考模型,建立了飞行器姿态预测控制模型。基于此,利用预测理论设计了飞行器的预测控制器,同时设计了干扰观测器实时观测外界未知干扰来进行补偿控制,从而实现滚动优化的目的;基于干扰观测值与真值的误差,利用Lyapunov稳定性理论,确定了控制精度与预测步长大小的关系;最后,在参数标称与拉偏的情形下进行了高超声速飞行器姿态控制系统仿真,仿真结果表明,干扰观测器能快速跟踪干扰,并且所设计的预测步长可以满足飞行器高精度的控制要求。     

Adaptive Gaussian sum squared-root cubature Kalman filter with split-merge scheme for state estimation

The paper deals with state estimation problem of nonlinear non-Gaussian discrete dynamic systems for improvement of accuracy and consistency. An efficient new algorithm called the adaptive Gaussian-sum square-root cubature Kalman filter（AGSSCKF） with a split-merge scheme is proposed. It is developed based on the squared-root extension of newly introduced cubature Kalman filter（SCKF） and is built within a Gaussian-sum framework. Based on the condition that the probability density functions of process noises and initial state are denoted by a Gaussian sum using optimization method, a bank of SCKF are used as the sub-filters to estimate state of system with the corresponding weights respectively, which is adaptively updated. The new algorithm consists of an adaptive splitting and merging procedure according to a proposed split-decision model based on the nonlinearity degree of measurement. The results of two simulation scenarios（one-dimensional state estimation and bearings-only tracking） show that the proposed filter demonstrates comparable performance to the particle filter with significantly reduced computational cost.     

Gust response analysis and wind tunnel test for a high-aspect ratio wing

A theoretical nonlinear aeroelastic response analysis for a flexible high-aspect ratio wing excited by harmonic gust load is presented along with a companion wind tunnel test. A multidisci-plinary coupled numerical calculation is developed to simulate the flexible model wing undergoing gust load in the time domain via discrete nonlinear finite element structural dynamic analysis and nonplanar unsteady vortex lattice aerodynamic computation. A dynamic perturbation analysis about a nonlinear static equilibrium is also used to determine the small perturbation flutter bound-ary. A novel noncontact 3-D camera measurement analysis system is firstly used in the wind tunnel test to obtain the spatial large deformation and responses. The responses of the flexible wing under different static equilibrium states and frequency gust loads are discussed. The fair to good quanti-tative agreements between the theoretical and experimental results demonstrate that the presented analysis method is an acceptable way to predict the geometrically nonlinear gust response for flex-ible wings.     

基于自适应差分进化算法的变循环发动机模型求解方法研究

为了降低传统迭代算法在求解变循环发动机非线性模型时对初值的依赖性,将模型的求解问题转换为求最小值的优化问题,引入差分进化算法进行模型的求解,并提出一种自适应差分进化算法(ADE)。ADE借助轮盘赌选择法,利用种群的进化经验可以自适应的选择最适合当前种群的差分策略与算法控制参数。针对变循环发动机四个典型工作点的模型求解问题,研究了标准差分进化算法(SDE)的控制参数对其性能的影响,获取了SDE在求解四个典型工作点时的最优控制参数组合,对比分析了ADE与SDE的性能差异,最后研究了种群规模对ADE性能的影响。结果表明：SDE在求解发动机模型时具有较好的鲁棒性,在求解不同工作点时算法的最优控制参数并不完全相同;相比于使用最优控制参数的SDE,ADE可以在不影响算法鲁棒性的情况下提升效率50%以上;减少ADE的种群规模会在提升算法效率的同时破坏鲁棒性。     

多旋翼无人机弹药发射过程扰动响应特性

针对多旋翼无人机弹药发射过程的扰动响应问题,建立了弹药发射过程无人机飞行动力学模型。在考虑了基本增稳增控飞行控制的条件下,分析了弹药安装位置、质量、反冲量大小和倾斜发射角等参数对发射过程无人机位置、高度和姿态扰动响应的影响规律。分析表明:对于弹药水平发射,纵向安装位置对无人机水平位置扰动幅值具有重要影响,适当后置弹药安装位置可减小无人机位置扰动幅值,在其他参数一定的条件下,存在无人机位置扰动最小的弹药纵向安装位置。对于弹药倾斜发射,给出了无人机水平位置扰动幅值关于弹药安装位置和倾斜发射角的等值图,可为无人机和弹药的匹配选型问题提供参考。      

Disturbance observer-based backstepping control for hypersonic flight vehicles without use of measured flight path angle

In this paper a nonlinear control method is proposed for the tracking control of hypersonic flight vehicles. The designed control laws do not utilize the measured flight path angle due to its inferior accuracy in practical engineering. For this, an estimated flight path angle is designed via the measurements of the altitude and velocity. A tracking differentiator is designed for constructing nonlinear disturbance observer which is used to estimate the model uncertainties including the parameter indeterminacies and external disturbances in the channels of velocity and pitch rate. A robust high-order differentiator is introduced to avoid the employment of the measured flight path angle and estimate the lumped disturbance in dynamics of flight path angle. Meanwhile, the possible saturation of the control inputs is considered and compensated by the auxiliary states. The boundness of closed-loop signals is proved through the Lyapunov theory. Comparative simulations are carried out and the results demonstrate the effectiveness of the proposed method.     

基于状态观测器的空间机械臂关节故障诊断

为了实时检测空间机械臂关节故障的发生并获得有效的故障信息,提出一种基于状态观测器的关节故障诊断方法。通过结合滑模变结构控制理论设计滑模状态观测器,获得机械臂各运行状态的残差信息,并将其与设定的阈值比较,实现关节故障的检测。进而引入不同的故障模式,构建故障数据库,将实际关节故障所导致的机械臂故障残差信息与故障数据库对比,完成故障发生位置及其故障程度的识别。所提诊断方法考虑了空间机械臂系统内部强耦合特性,能够及时检测故障的发生并获取有效的故障信息。最后以7自由度空间机械臂为对象开展数值仿真研究,验证了所提关节故障诊断方法的有效性。     

考虑系统扰动的永磁同步电机复合控制策略

提出一种结合滑模速度控制和扩展滑模扰动观测器的永磁同步电机复合控制策略。滑模速度控制采用新型趋近律设计,扩展滑模扰动观测器对系统内部参数摄动以及外部负载干扰进行准确估计。所设计的复合控制器通过系统扰动估计环节对控制系统中的综合扰动项进行实时估计,用以对速度控制环节进行前馈补偿,实现控制系统自抗扰控制。试验结果验证了所提出控制策略的有效性和可行性。