飞机结构缺陷漏检概率评估与控制技术

提出了一种飞机结构缺陷漏检概率评估与控制技术,利用该技术可以有效地提高单机乃至机群中缺陷 (裂纹 )检出概率 ( POD),并可以对缺陷 (裂纹 )的漏检概率进行准确地评估和控制,使飞机因裂纹漏检而造成事故的可能性降至最低程度,从而确保飞机的安全飞行。     

一种基于Socket通信及PCIe的机载计算机设备测试管理技术研究

本文针对当前复杂机载计算机设备后期维护管理中存在的问题,提出了一种利用机箱内总线PCIe技术,将机箱设备视为整体进行一体化管理的设计方案,并结合Socket通信机制,设计出一种能够利用上位机软件完成机箱一体化管理的处理方法。     

基于Visual Basic的互感器负荷箱测量仪校准系统的实现

为解决互感器负荷箱测量仪同相分量和正交分量的校准问题,在分析互感器负荷箱测量仪工作原理的基础上,设计了基于电子/电工组合式的互感器负荷箱测量仪校准装置,并简要说明装置电工部分、电子部分以及上位机软件的实现。经省级计量研究院验证结果表明,该装置校准结果符合0.2级要求,可作为标准装置解决1级互感器负荷箱测量仪量值溯源问题。     

工程应用中的随机振动试验技术研究

阐述了机载电子设备随机振动试验的分类 ,并对宽带随机振动谱型的计算方法 ,振动推力及位移的指标进行了分析探讨。研究了试验的实用技术及控制方式的选择要点。最后给出了一个机载电子设备振动故障分析的例子。     

金属板料单向拉伸引伸计及测试系统的研制

利用电阻应变式传感器的原理，研制了单向引伸计及测试系统，对金属薄料的成形性能参数应变刚指数n和厚向异性指数r进行检测，并成功地用于科研和教学活动中，在材料检测研究方面颇具价值。     

Integrity of sulfur concrete subjected to simulated lunar temperature cycles

In view of potential application as a construction material on the lunar surface the mechanical integrity of sulfur concrete was evaluated after being subjected to simulated temperature cycles. Here, small cubes of sulfur concrete were repeatedly cycled between room (20 °C) and liquid nitrogen (−191 °C) temperatures after which they, and non-cycled cubes, were evaluated by compression testing. The compression strength of the non-cycled samples averaged ∼35 MPa (5076 psi) before failing whereas the cycled samples fractured at about 7 MPa (1015 psi). Microscopic examination of the fracture surfaces from the cycled samples showed clear de-bonding of the sulfur from the aggregate whereas it was seen adhering in those non-cycled. Based on a simple analysis it was concluded that the large strength discrepancy between cycled and non-cycled samples is due to differences between the coefficients of thermal expansion of the materials constituting the concrete.     

Numerical prediction and wind tunnel experiment for a pitching unmanned combat air vehicle

The low-speed flowfield for a generic unmanned combat air vehicle (UCAV) is investigated both experimentally and numerically. A wind tunnel experiment was conducted with the Boeing 1301 UCAV at a variety of angles of attack up to 70 degrees, both statically and with various frequencies of pitch oscillation (0.5, 1.0, and 2.0 Hz). In addition, pitching was performed about three longitudinal locations on the configuration (the nose, 35% MAC, and the tail). Solutions to the unsteady, laminar, compressible Navier–Stokes equations were obtained on an unstructured mesh to match results from the static and dynamic experiments. The computational results are compared with experimental results for both static and pitching cases. Details about the flowfield, including vortex formation and interaction, are shown and discussed, including the non-linear aerodynamic characteristics of the vehicle.     

基于BMU/LVDS总线的闭环总检查测试技术研究

为了更好地满足控制系统总检查测试的有效性和覆盖性要求,本文提出了火箭控制系统总检查的闭环测试方案。同时,新一代运载火箭所采用的总线监控单元BMU和箭地高速串行总线LVDS等新技术使方案的实现成为了可能。本文先介绍和论述了方案提出的必要性、原理以及实现的技术支持;接着提出了几点闭环实现的设计思路;最后在某型号火箭控制系统综合实验的基础上搭建了闭环测试平台,对惯组的有效性以及迭代制导算法的适应性进行了系统级的验证,实验表明方案能够很好地满足地面测试的有效性和覆盖性。     

AFDX交换机测试分析系统设计

AFDX网络由端系统、交换机和传输链路组成,交换机是AFDX网络的中枢构件。本文首先研究了AFDX交换机的功能和性能,在此基础上,设计了AFDX交换机测试分析系统,测试软件基于多框架、多视图、单文档,采用面向对象技术实现了交换机配置文件的处理、数据帧的捕获和解析、VL转发特征测试、技术时延测试、流量管制测试等一系列功能。最后进行了测试分析试验,试验展示了该测试分析系统对于AFDX交换机的测试效果。     

发动机质心测试系统软硬件设计

介绍了发动机质心测试系统的基本构成以及其软硬件的设计实现.