小波去除噪音算法研究

介绍了小波变换滤除噪音的机理和与傅立叶变换相比的优越性,其中包括确定性噪音和随机噪音。讨论了增强去噪效果的几种改进方案并提出一种试验估计去噪方法,对工程应用有一定的实用价值。     

内孔结构对旋转空化发生器水力特性的影响

空化普遍存在于工业生产、舰船推进、航空航天等领域.使用高速相机对闭式循环试验台的旋转空化发生器内部流动进行试验观测,然后基于RNG k-s湍流模型和Zwart-Gerber-Belamri空化模型开展了旋转空化发生器流场的数值模拟.结果表明数值模拟结果与试验观测数据吻合较好,验证了本文数值模拟方法的准确性和可靠性.受离...     

基于循环平稳性的噪声调频干扰高分辨测向方法

根据噪声调频信号循环平稳特性分析,提出了基于阵列接收信号循环均值-空域处理的波达方向(DOA)估计算法。仿真结果表明:该算法的角度估计性能明显高于比幅比相单脉冲测角法,且在高信噪比环境中,该法的估计性能更好、运算量较小。     

风扇进口噪声预测模型的改进

针对Heidmann模型对风扇进口低频噪声(1k Hz)预测结果偏低的情况,通过引入风扇叶尖弦长雷诺数和相关几何参数改进了Heidmann模型中风扇进口宽频噪声的频谱修正函数,确定了其中频谱修正系数为0.085。对比改进模型和Heidmann模型的风扇进口噪声预测结果发现:在亚声速工况下,改进的模型很好地改善了风扇进口低频噪声的预测结果,改进幅值可以达到约45d B;而在超声速工况下,由于风扇进口产生的组合单音噪声成为风扇进口噪声的主要组成部分,除了在小于100Hz的频域内,改进的模型与Heidmann模型的预测结果差别不大。     

Noise analysis of continuous GPS coordinate time series for CMONOC

The Crustal Movement Observation Network of China (CMONOC) is one of the major scientific infrastructures, mainly using Global Positioning System (GPS) measurements, to monitor crustal deformation in the Chinese mainland. In this paper, decade-long coordinate time series of 26 continuous GPS sites of CMONOC are analyzed for their noise content using maximum likelihood estimation (MLE). We study the noise properties of continuous GPS time series of CMONOC for the unfiltered, filtered solutions and also the common mode signals in terms of power law plus white noise model. In the spatial filtering, we remove for every time series a common mode error that was estimated from a modified stacking of position residuals from other sites within ∼1000 km of the selected site. We find that the common mode signal in our network has a combination of spatially correlated flicker noise and a common white noise with large spatial extent. We demonstrate that for the unfiltered solutions of CMONOC continuous GPS sites the main colored noise is a flicker process, with a mean spectral index of ∼1. For the filtered solutions, the main colored noise is a general power law process, indicating that a major number of the filtered regional solutions have a combination of noise sources or local effects. The velocity uncertainties from CMONOC continuous GPS coordinate time series may be underestimated by factors of 8–16 if a pure white noise model is assumed. In addition, using a white plus flicker noise model, the median values of velocity errors for the unfiltered solutions are 0.16 (north), 0.17 (east) and 0.58 (vertical) mm/yr, and the median values for the filtered solutions are 0.09 (north), 0.10 (east) and 0.40 (vertical) mm/yr.     

An artificial neural network approach for aerodynamic performance retention in airframe noise reduction design of a 3D swept wing model

With the progress of high-bypass turbofan and the innovation of silencing nacelle in engine noise reduction, airframe noise has now become another important sound source besides the engine noise. Thus, reducing airframe noise makes a great contribution to the overall noise reduction of a civil aircraft. However, reducing airframe noise often leads to aerodynamic perfor-mance loss in the meantime. In this case, an approach based on artificial neural network is intro-duced. An established database serves as a basis and the training sample of a back propagation (BP) artificial neural network, which uses confidence coefficient reasoning method for optimization later on. Then the most satisfactory configuration is selected for validating computations through the trained BP network. On the basis of the artificial neural network approach, an optimization pro-cess of slat cove filler (SCF) for high lift devices (HLD) on the Trap Wing is presented. Aerody-namic performance of both the baseline and optimized configurations is investigated through unsteady detached eddy simulations (DES), and a hybrid method, which combines unsteady DES method with acoustic analogy theory, is employed to validate the noise reduction effect. The numerical results indicate not merely a significant airframe noise reduction effect but also excel-lent aerodynamic performance retention simultaneously.     

红外探测器参数自动计量测试

介绍了我站的红外探测器参数（黑体响应率，噪声、黑体探测率）自动测试系统以及参数测试关键技术的解决分析了这些参数测量不确定度。     

U（sl（2,F）（＋））的生成元及生成关系

设sl（2，F）是三维单代数，sl（2,F）是相应于sl（2，F）的无扭仿型Kac-Moody代数的导代数。讨论了sl（2,F）的子代数sl（2,F）（＋）的普遍包络代数U（sl（2,F）（＋））的生成元及生成关系问题。     

Swsy-A型双压法湿度发生器的研制

介绍了适用于湿度校准实验室和现场使用的Swsy-A型双压法湿度发生器，阐述了其工作原理，并给出了技术指标、性能、试验结果和分析结论。     

Streamwise vortex generation by the rod

The technology development related to aerodynamics is leading to ever increasing loads of wings, airfoils and turbine and compressor blades. The increase in aerodynamic forces is often leading to flow separation and depreciation of the aerodynamic performance of flying objects or propulsion systems. Flow control methods are required to avoid these negative effects. In the recent two decades the flow control by means of air-jet vortex generators has been also intensively investigated. In this method a streamwise vortex is introduced by an oblique jet. The necessity to supply air by a pipe system may be considered a disadvantage. In order to eliminate this feature, it has been proposed to put out a rod instead of a jet. It has been shown that the application of a rod can introduce the same effect as a jet, as long as the streamwise vortex generation is concerned and appropriate dimensions are used. The present paper focuses on the influence of rod vortex generators on a flow pattern downstream. The results presented here concern experimental and numerical investigations and provide guidelines for the design of a new flow control method dedicated mainly to external flows.