同步双小行星系统共振轨道设计

研究了同步双小行星系统中共振轨道的设计方法及演化规律。首先，基于双椭球模型建立探测器运动方程，并给出共振轨道初值选取方法。然后，利用改进并行打靶法，提出一种双小行星系统平面共振轨道两步修正方法。同时结合稳定性理论及分岔理论，给出双小行星系统三维共振轨道生成和延拓方法；最后，以双小行星系统1999KW4为例，设计了共振比为1∶1,1∶2,1∶3,1∶4,2∶3的平面和空间共振轨道族，并分析了共振轨道的特性及轨道周期和轨道能量的变化规律。给出的双小行星系统中共振轨道的设计方法具有普适性，对未来双小行星系统探测任务中的轨道设计具有一定的参考意义与借鉴价值。     

Case study of inclined sporadic E layers in the Earth’s ionosphere observed by CHAMP/GPS radio occultations: Coupling between the tilted plasma layers and internal waves

We have used the radio occultation (RO) satellite data CHAMP/GPS (Challenging Minisatellite Payload/Global Positioning System) for studying the ionosphere of the Earth. A method for deriving the parameters of ionospheric structures is based upon an analysis of the RO signal variations in the phase path and intensity. This method allows one to estimate the spatial displacement of a plasma layer with respect to the ray perigee, and to determine the layer inclination and height correction values. In this paper, we focus on the case study of inclined sporadic E (E_s) layers in the high-latitude ionosphere based on available CHAMP RO data. Assuming that the internal gravity waves (IGWs) with the phase-fronts parallel to the ionization layer surfaces are responsible for the tilt angles of sporadic plasma layers, we have developed a new technique for determining the parameters of IGWs linked with the inclined E_s structures. A small-scale internal wave may be modulating initially horizontal E_s layer in height and causing a direction of the plasma density gradient to be rotated and aligned with that of the wave propagation vector k. The results of determination of the intrinsic wave frequency and period, vertical and horizontal wavelengths, intrinsic vertical and horizontal phase speeds, and other characteristics of IGWs under study are presented and discussed.     

Mechanism of error propagation from the subdaily Universal Time model into the celestial pole offsets estimated by VLBI

Within the analysis of space geodetic observations, errors of the applied subdaily Earth rotation model can induce systematic effects in different estimated parameters. In this paper, we focus on the impact of the subdaily Universal Time (UT1) model on the celestial pole offsets (CPO) estimated from very long baseline interferometry (VLBI) observations. We provide a mechanism that describes the error propagation from the subdaily UT1 into the daily CPO.In typical 24-h VLBI sessions the observed quasars are well distributed over the sky. But the observations, if looked at from the Earth-fixed frame, are not homogeneously distributed. The amount of observations performed in different terrestrial directions shows an irregularity which can be roughly compared to the case where the observations are collected in only one Earth-fixed direction. This peculiarity leads to artefacts in VLBI solutions, producing a correlation between the subdaily variations in UT1 and the position of the celestial pole. As a result errors in diurnal terms of the subdaily UT1 model are partly compensated by the estimated CPO. We compute for each 24-h VLBI session from 1990 until 2011 the theoretical response of the CPO to an error in the subdaily UT1 by setting up a least-squares adjustment model and using as input the coordinates of the observed quasars and observation epochs. Then real observed response of the estimated CPO derived from the VLBI session solutions is compared to the predicted one. A very good agreement between the CPO values estimated from VLBI and the predicted values was achieved. The presented model of error propagation from the subdaily UT1 into the daily CPO allows to predict and explain the behaviour of CPO estimates of VLBI solutions computed with different subdaily Earth rotation models, what can be helpful for testing the accuracy of different subdaily tidal models.     

以太阳为射电源直接测量天线G／T

介绍以太阳为射电源,直接测量扩充后中国陆地卫星地面接收站,３个数据通道天线的Ｇ／Ｔ性能．对固定通道,测量了Ｌａｎｄｓａｔ—５下行频率的Ｇ／Ｔ～α（天线俯仰角）性能曲线;对可变通道,在α＝５°、３０°时,测量了Ｌａｎｄｓａｔ—６、ＪＥＲＳ—１、ＥＲＳ—１、ＳＰＯＴ卫星、ＺＹ—１卫星下行频率的Ｇ／Ｔ性能,以及可变通道的Ｇ／Ｔ～ｆ性能曲线,最后进行了误差分析．     

从日地系统L2出发借力月球飞越近地小行星

对于停留在日地系统L2的“嫦娥2号”探测器,其后续飞行方案有多个选项,例如主动撞月或重返月球轨道、返回地球轨道或再入大气、飞往地月系统L1/L2或日地系统L1、进入深空飞越近地小行星(最终,“嫦娥2号”于2012年12月13日成功地实现了对Toutatis小行星的近距离飞越)。探讨上述的飞行方案需要对飞行轨道进行初步设计,总的速度脉冲限制在100 m/s以内并且需要考虑探测器同时受到太阳、地球、月球的引力作用。本研究设计了探测器从日地系统L2出发借力月球实现Toutatis小行星飞越的飞行方案,与直接飞越方案相比,借力月球可以进一步节省探测器的燃料消耗,其等效速度脉冲设计值为58.47 m/s。     

CHAMP卫星加速度计标校参数序列的谱分析

给出了利用能量守恒方法求定CHAMP卫星加速度计标校参数的基本原理和算法．对2001年8月-2003年12月共约两年半的CHAMP卫星加速度计数据进行了标校,导出了尺度、偏差和偏差漂移参数的时间序列,分别采用最小二乘谱分析和抗差谱分析对这些时间序列进行了分析．结果表明,尺度、偏差和偏差漂移参数都有明显的周期变化,但各主周期项略有差异．尺度的主周期是441d、220d、126d和13．4d的周期变化,其中220d和441d的周期变化的贡献相对较大．偏差中有明显的220d、126d和13．4d周期变化,各周期变化的贡献几乎相当;偏差漂移的主周期是220d、13．4d和9d的周期变化,其中13．4d的周期变化最为显著,几乎比其他周期项变化高出一个数量级．另外尺度和偏差参数还有明显的长期变化,而偏差漂移参数的长期变化不明显．     

利用自然能的轨迹可控临近空间浮空器初步设计

文章针对现有临近空间浮空器持久区域驻留期间面临的“超热”、“超压”和抗风机动飞行对材料和能源技术的挑战,提出一种充分利用自然界热能和准零风层风场环境的新型临近空间浮空器技术方案。文章分别介绍了新型临近空间浮空器的工作原理、系统组成、功能特点和飞行操控策略;通过浮空器热建模仿真分析和参数总体设计,研究了主气囊热控参数、浮空器白天和夜间“超热”能力,以及浮空器体积规模之间的耦合关系。结果表明,通过主气囊热控参数优化设计,可使浮空器白天“超热”值在100K以上,夜间“超热”值在20K以上,并给出了20~80K“超热”范围内的新型浮空器总体参数设计结果,这些结果满足浮空器高度调节所需浮升能力变化要求。     

双星系统L1点悬停探测控制器设计与仿真

双小行星系统探测具有重要的科学意义,受其复杂动力学环境影响,探测任务极具挑战。利用球谐函数法对双星系统进行引力场建模,求解双星系统平动点,并选取其内部共线平动点L_1点作为双星系统悬停探测目标位置。采用航天探测实际任务中常用的脉冲推力式发动机,设计了一种原理简单、便于工程实现的常值切换bang-bang控制器。以69230Hermes双星系统为例,将Hermes近似为双椭球系统,仿真分析航天器在Hermes双星系统L_1点悬停飞行的控制效果,验证所提控制策略有效性。     

New trade tree for manned mars missions

Recent studies on human missions to Mars suggest revisiting the parameters that have the most important impact on the complexity, the initial mass in low Earth orbit, the risks and the development costs for the first journey to the red planet. In the last NASA reference mission, a trade tree is proposed.     

应用双向时间传递的重力卫星时标误差自主测量

星间时标误差的自主测量对于中国自主研发地球重力卫星具有重要意义. 提出利用双向时间传递法实现重力卫星时标误差的自主测量, 设计了测量方案, 建立了包含卫星运动导致的链路非对称、电离层效应、设备零值以及随机测时误差在内的测量模型. 结合地球重力卫星相关特性, 分析了时标误差测量中各误差源的影响及相应的误差校正方法. 以GRACE重力卫星为例, 利用提出的方法和校正措施, 星间时标误差自主测量精度可以达到0.62ns, 其中误差主要来自系统零值标定误差和随机测时误差.