组合卫星导航系统的快速选星方法

分析了选星数目与几何精度因子(GDOP, Geometry Dilution of Precision)及导航运算量的关系,基于遗传算法提出了一种以满足用户定位精度需求为条件的快速选星方法——快速遗传选星法.根据用户需求确定选星数目初值、选星数目最大值和GDOP阈值,构造选星方案的初始种群,在进化代数上限为1的条件下对种群进行选择、交叉和变异运算,获得初始选星解,根据初始解的GDOP与阈值的关系确定是否依据GDOP最小原则对初始解进行优化,直至满足算法终止条件,输出选星解.仿真结果表明,该算法可以在一次进化之内以不低于92.45%的概率满足GDOP阈值在2.5~6的要求,同时可有效降低54.75%以上的导航运算量.      

Attitude determination of planetary exploration rovers using solar panels characteristics and accelerometer

In this study, we propose a new attitude determination system, which we call Irradiance-based Attitude Determination (IRAD). IRAD employs the characteristics and geometry of solar panels. First, the sun vector is estimated using data from solar panels including current, voltage, temperature, and the normal vectors of each solar panel. Because these values are obtained using internal sensors, it is easy for rovers to provide redundancy for IRAD. The normal vectors are used to apply to various shapes of rovers. Second, using the gravity vector obtained from an accelerometer, the attitude of a rover is estimated using a three-axis attitude determination method. The effectiveness of IRAD is verified through numerical simulations and experiments that show IRAD can estimate all the attitude angles (roll, pitch, and yaw) within a few degrees of accuracy, which is adequate for planetary explorations.     

星间链路发射机时延零值的数字标定算法

The traditional absolute calibration based on oscilloscopic observation is not suitable for crosslink transmitter. A new calibration algorithm is developed by using a digital signal processing technique. The output signal of crosslink transmitter and the pulse per second signal are sampled in synchronization. At first, the delay reference is determined according to straight line fitting for the signal level stepping segment. The sampling data of crosslink transmitting signal is decimated and then phase acquisition processing is made to determine the initial synchronization point. A fine search for the start of the pseudo random code has been processed between front and rear of the initial synchronization point. Finally, the transmitter delay can be obtained according to the sampling frequency and the calibration delay of the test cable and attenuator. Compared with the oscilloscopic observation method, the analysis and test results show that the proposed technique has overcome the faults caused by whole chip ambiguity and the calibration accuracy can be improved by an order of magnitude.     

The impact of orbital errors on the estimation of satellite clock errors and PPP

Precise satellite orbit and clocks are essential for providing high accuracy real-time PPP (Precise Point Positioning) service. However, by treating the predicted orbits as fixed, the orbital errors may be partially assimilated by the estimated satellite clock and hence impact the positioning solutions. This paper presents the impact analysis of errors in radial and tangential orbital components on the estimation of satellite clocks and PPP through theoretical study and experimental evaluation. The relationship between the compensation of the orbital errors by the satellite clocks and the satellite-station geometry is discussed in details. Based on the satellite clocks estimated with regional station networks of different sizes (∼100, ∼300, ∼500 and ∼700 km in radius), results indicated that the orbital errors compensated by the satellite clock estimates reduce as the size of the network increases. An interesting regional PPP mode based on the broadcast ephemeris and the corresponding estimated satellite clocks is proposed and evaluated through the numerical study. The impact of orbital errors in the broadcast ephemeris has shown to be negligible for PPP users in a regional network of a radius of ∼300 km, with positioning RMS of about 1.4, 1.4 and 3.7 cm for east, north and up component in the post-mission kinematic mode, comparable with 1.3, 1.3 and 3.6 cm using the precise orbits and the corresponding estimated clocks. Compared with the DGPS and RTK positioning, only the estimated satellite clocks are needed to be disseminated to PPP users for this approach. It can significantly alleviate the communication burdens and therefore can be beneficial to the real time applications.     

载波相位辅助的GPS动态单点定位算法综述

对载波相位辅助条件下应用于全球定位系统（Global Positioning System,GPS）动态单点定位的各种算法进行了综合分析与比较。首先简要介绍定位算法中的基本公式与观测模型;然后分别对周跳修复与滤波解算两部分所应用的各种算法进行详细介绍并比较其性能与适用范围;最后对尚待解决的问题及可能的发展方向进行了总结。     

导航星座的任务重构技术研究

以COMPASS卫星导航星座为对象,研究了导航任务的重构技术。首先,对COMPASS卫星导航星座的主要性能进行了分析和仿真;其次,分析了星座中部分卫星失效后对导航性能的影响;最后,提出了分别利用在轨运行的高、中、低轨卫星及临近空间飞行器进行任务重构的方法,并对重构后的导航性能进行了仿真。仿真结果表明：提出的任务重构方法对于保证导航星座的正常运行是有效的。同时,对于研究飞行器应急测控技术具有借鉴意义。     

高精度VLBI技术在深空探测中的应用

介绍了适合单探测器测定轨的高精度VLBI技术和适合多探测器测定位的同波束VLBI技术的研究进展。利用"嫦娥3号"着陆器的ΔDOR型VLBI观测,得到了误差0.67ns的VLBI群时延数据。利用"嫦娥3号"着陆器和月球车的同波束VLBI观测,得到了随机误差0.3ps的差分相时延数据,以数厘米的灵敏度监测出月球车的移动、转弯等动作,并把月球车的相对定位精度提高至1m。针对深空探测,提出了使VLBI时延测量精度进一步提高所需要开展的部分研究内容。     

复杂薄壁构件自适应加工工艺几何模型重构

随着制造理念和制造水平的不断提高,大量复合制造工艺背景下的近净成形叶片被应用到现役或在研的航空发动机中。该类叶片是典型的复杂薄壁结构零件,无精确定位基准,且成形一致性差。采用传统叶身定位,加工后的前/后缘、榫齿形状和位置精度均难以保证,从而导致产品一致性差,易超差与合格率低。针对以上问题,提出一种面向自适应加工的复杂薄壁结构零件工艺几何模型重构方法。首先,建立复杂曲面的采样点分布模型,快速获取叶片精确成型区域的位置和形状;其次,提出基于特征曲线相似变形的模型重构算法,精确重构前/后缘非精确成型区域的工艺几何模型;最后,通过精锻叶片自适应加工试验进行验证。试验结果表明：该方法可有效满足以精锻叶片为代表的复杂薄壁构件自适应加工要求。     

基于MHSS算法的ARAIM完好性和可用性预测

传统的接收机自主完好性监视只能提供非精密进近阶段的完好性监视,无法实现对完好性要求更加严格的飞行阶段的监视,而高级接收机自主完好性监视（AdvancedReceiverAutonomousIntegrityMonitoring,ARAIM）可以在精密进近阶段为飞机提供满足航向信标性能垂直引导（LocalizerPerformancewithVerticalguidance,LPV）的完好性监视服务。文章基于多假设分组解算法,根据目前的星座环境,结合民航不同飞行阶段的应用需求,对ARAIM算法进行仿真研究。针对水平保护级（HorizontalProtectionLevel,HPL）和垂直保护级（VerticalProtectionLevel,VPL）的指标,在不同星座组合环境下,选取南北半球不同经纬度的5个观测机场,分别仿真了HPL和VPL的变化情况,并对全球HPL和VPL平均分布趋势,以及以99%的概率满足LPV-200进近可用性指标时,ARAIM可用性的全球覆盖率进行了仿真预测分析。仿真结果表明,不论是全球定位系统和格洛纳斯双星座还是增加北斗卫星导航系统后的三星座,5个观测机场的HPL和VPL均能满足LPV-200进近对完好性指标的要求;但在全球范围内,双星座条件下,ARAIM并不能完全支持LPV-200进近对完好性监视的要求,而三星座则可大大提高ARAIM的可用性,为民航用户提供满足精密进近的所需导航服务性能。