欧美航天材料保证的做法与探讨

介绍美国NASA的MAPTIS数据库情况,并通过对NASA和ECSS材料保证做法的分析,探讨欧美国家长期以来在材料保证方面积累的经验,归纳其对我们的借鉴作用.     

Air-LUSI: A robotic telescope design for lunar spectral measurements

This paper presents the mechanical design of a new robotic telescope that was designed and built to acquire lunar spectral measurements from the science pod of NASA's ER-2 aircraft while flying at an altitude of 70,000 feet (21.34 km). The robotic telescope used a double gimbal design that allowed for target tracking in azimuth and elevation. In addition to the challenging and restrictive geometry of the science pod, each component needed to be carefully selected to ensure that they could withstand the operating conditions at high altitude such as harsh temperatures extending as low as −54 °C and atmospheric pressure less than 1.05 psi (7.23 kPa). Due to the cold temperatures, low atmospheric pressure and the likely exposure to moisture, high strength industrial linear actuators were used to create an adjustable linkage system that controlled the pointing and tracking of the telescope. Although unconventional, this allowed for a robust design that outperformed the team's expectations by tracking the Moon for 40 min with an average tracking error under 0.05°. The results presented within this paper were acquired during a first set of engineering test flights, with further scientific missions to follow.     

Applying fuzzy bi-dimensional scenario-based model to the assessment of Mars mission architecture scenarios

Sending man to Mars has been a long-held dream of humankind. NASA plans human planetary explorations using approaches that are technically feasible, have reasonable risks and have relatively low costs. This study presents a novel Multi-Attribute Decision Making (MADM) model for evaluating a range of potential mission scenarios for the human exploration of Mars. The three alternatives identified by the Mission Operations Directorate (MOD) at the Johnson Space Center (JSC) include split mission, combo lander and dual scenarios. The proposed framework subsumes the following key methods: first, the conjunction method is used to minimize the number of alternative mission scenarios; second, the Fuzzy Risk Failure Mode and Effects Analysis (RFMEA) is used to analyze the potential failure of the alternative scenarios; third, the fuzzy group Real Option Analysis (ROA) is used to estimate the expected costs and benefits of the alternative scenarios; and fourth, the fuzzy group permutation approach is used to select the optimal mission scenario. We present the results of a case study at NASA’s Johnson Space center to demonstrate: (1) the complexity of mission scenario selection involving subjective and objective judgments provided by multiple space exploration experts; and (2) a systematic and structured method for aggregating quantitative and qualitative data concerning a large number of competing and conflicting mission events.     

嵌入式系统的组成、设计与调试

嵌入式系统是将先进的计算机技术、半导体技术和电子技术相结合的产物。本文介绍了嵌入式系统的组成,并针对嵌入式系统自身的特点,深入地阐述了设计和调试方面的一些关键技术。     

跨音速压气机附面层组合抽吸方案对比分析

以NASA Rotor35为研究对象,应用数值模拟方法深入研究了叶表抽吸和端壁抽吸的不同抽吸组合布局对该跨音速压气机流场结构以及其性能影响规律.研究结果表明:四种抽吸组合在不同的抽吸量下均使压气机的压比和效率有所提高,相对叶表抽吸或端壁抽吸,其在较大的抽吸量时对压气机性能的提升较大,在抽吸量Sc=2.0%时最佳抽吸组合...     

NASA TrapWing高升力标模数值模拟研究

针对NASA TrapWing高升力全展襟翼构型，采用计算流体力学（ CFD）方法进行三维复杂流场仿真模拟，考察网格尺度和湍流模型对高升力模型气动特性的影响。采用“超立方体”概念，生成绕TrapWing模型的不同网格密度高质量多块结构网格，通过求解雷诺平均Navier-Stokes方程，研究网格尺度对高升力模型气动特性的影响。在此基础上选取中等规模计算网格，考察Spalart Allmaras和Menter k-ωSST湍流模型对高升力全展构型流场模拟能力，分析湍流模型对气动特性的影响。研究结果表明：网格策略具有较好的网格收敛性；湍流模型对翼稍附近位置上翼面压力系数的预测稍有影响，SA湍流模型预测的压力系数较SST更接近实验值。确认研究工作为大型飞机增升装置数值模拟提供了一定的参考。     

NASA和ESA的空间系统维修性/维修技术研究

本文对维修性／维修工程技术在NASA和ESA的发展做了简要回顾，并从人的因素对空间系统的影响、承制方负责全寿命周期保障、改进的RCM方法、RMA信息的标准化、仿真技术、在轨维修等几个方面对NASA和ESA在维修性／维修工程领域的理论、技术，以及NASA和ESA在这些方面实施维修性／维修工程的情况作了介绍和分析，其中对改进的RCM方法作了详细的介绍。     

叶顶间隙对离心叶轮内部流动及气动性能的影响

通过求解 N- S方程 ,数值研究了叶顶间隙对 NASA低速大尺度离心压缩机 (L SCC)三维粘性流场及气动性能的影响 ,在计算程序中采用了当地时间步长、多重网格以及隐式参差光顺来进行加速。对具有 0 .0 % ,5 0 % ,10 0 % ,2 0 0 %倍设计间隙的 4种离心叶轮的流场及气动性能进行了数值预测。研究结果表明 (1) NASA低速大尺度离心压缩机 (L SCC)半开式叶轮的低速尾迹区在压力面与轮盖的角区 ,而相应的闭式叶轮的低速尾迹区聚集在轮盖的中心位置 ;(2 )数值实验表明 ,叶顶间隙并非越小越好 ,可能存在一个最优间隙 ,使得叶轮流动损失最小