超视距空战条件下舰载机空中巡逻研究

根据超视距空战条件下舰载机空中巡逻的特点,建立舰载机空中巡逻的战术行为模型；采用蒙特卡洛法对巡逻效果进行模拟统计,分析雷达最远发现距离、巡逻区间距、舰载机定常平飞距离、巡逻飞行航线类型与飞行协同方式对舰载机空中巡逻效果的影响；最终给出超视距协同空战条件下,舰载机空中巡逻的组织方法。     

Passive attitude stabilization of ionic-wind-powered micro air vehicles

The ionic-wind-powered Micro Air Vehicles (MAVs) can achieve a higher thrust-to-weight ratio than other MAVs. However, this kind of MAV has not yet achieved controlled flight because of the unstable thrust produced by the ionic wind and the dynamic instability related to the small size. In this paper, a passive attitude stabilization method of the ionic-wind-powered MAV using air dampers is introduced. The key factors that influence the performance of the air dampers, including the layout, position, and area of the air dampers, are theoretically studied. The appropriate optimal position of the air dampers is also obtained by Monte Carlo stochastic simulations. Then the proposed passive attitude stabilization method is applied to the ionic-wind-powered MAVs of different wingspan (2 cm and 6.3 cm). Finally, the experimental results show that using the proposed method, attitude stabilization is achieved for the first time for the ionic-wind-powered MAV. Moreover, the altitude control of an ionic-wind-powered MAV with a wingspan of 6.3 cm is also demonstrated.     

临近空间高超声速稀薄流中梯形缝隙绕流分析

针对高超声速飞行器表面不规则缝隙的构型特征，将其简化为梯形缝隙模型；采用直接模拟蒙特卡洛(DSMC)方法对高超声速稀薄流中的缝隙绕流问题进行数值模拟；研究了不同的缝隙壁面倾角对流场结构以及壁面参数的影响，为航天器结构设计以及热防护设计提供了数值支持。结果表明：改变倾角会改变流场结构，当倾角减小时，外部流场会更深入缝隙内部，使得缝隙内流场和表面的气动参数增强，且倾角越小，影响的程度越深。同时，倾角减小也会减小缝隙内的旋涡强度，当倾角小于30°时，缝隙内的旋涡区域完全消失。     

Influence and experiment of cable-net manufacturing errors on surface accuracy of mesh reflector antennas

Cable-net structures are of substantial importance in the construction of large mesh reflector antennas. Owing to the inevitable errors in their manufacturing process, the reflector surface accuracy deteriorates. This study makes a comprehensive investigation of random manufacturing errors during constructing the mesh reflector antennas, and analyze its influence on reflector surface accuracy. Firstly, the sensitivity of reflector surface accuracy with respect to the random errors of the unstressed cable length is mathematically deducted. Secondly, a non-button connecting method is proposed and analyzed to reduce manufacturing errors. Thirdly, two physical experiment models based on 2.62-meter mesh reflector antenna are made. Finally, numerical examples and experimental tests are given to demonstrate the effectiveness of the proposed method. Compared with the traditional method, the proposed method can effectively reduce the influence of the manufacturing errors on the reflector surface accuracy. Moreover, the reduction in the sizes of the nodes also reduces the risk of entanglement of the mesh reflector antenna during the deployment process, and thereby improves the deployment reliability.     

一种基于实测点云数据的壁板类零件修配加工路径计算方法

针对飞机壁板类零件采用修配法装配过程中需要精确获取修配加工路径的问题，提出一种基于实测点云数据的壁板类零件修配加工路径计算方法。首先设计一种基于法线差的特征点检测算法提取参考壁板的初始特征点。然后建立迭代收缩优化模型对初始特征点进行收缩优化，得到参考壁板的准确特征点。最后根据工装定位孔特征进行配准，将参考壁板的特征点映射到待修配壁板上，并将映射后的特征点按照一定顺序进行连接，得到待修配壁板的修配加工路径，按照修配路径进行加工，获得壁板装配配合边界。实验表明，该方法能够精确提取待修配壁板修配加工路径，并且经过加工验证，壁板试验件对缝间隙获得小于1.2 mm的实际效果。     

Optimization for aerodynamic performance of double serpentine nozzles with spanwise offsets using Taguchi-based CFD analysis

Serpentine nozzles are widely used in combat aircraft to realize strong stealth characteristics. Based on the layout characteristics within a confined space, a series of double serpentine nozzles with spanwise offsets are established. Using computational fluid dynamics and Taguchi method, the influence mechanisms of the Distribution of Area (DA), Distributions of Centerline for the first and second ‘S’ sections in the Vertical direction (DCV1 and DCV2), and Distribution of Centerline in the Spanwise direction (DCS) are analyzed. The impact of these factors on the total pressure recovery coefficient can be ranked as DA > DCV2 > DCS > DCV1, whereas their impacts on the discharge coefficient and axial thrust coefficient can be ranked as DCV2 > DCS > DA > DCV1. Considering the statistical significance of these factors, a nozzle in which DA changes rapidly at the exit and DCV1, DCV2, and DCS change rapidly at the entrance gives the best aerodynamic performance. Compared to the worst configuration, the total pressure recovery coefficient, discharge coefficient, and axial thrust coefficient are improved by 1.6%,3.5% and 3.6%, respectively. DA influences the gas flow acceleration in the entire serpentine channel, resulting in different wall shear stress and friction losses. The various centerline distributions influence the gas flow acceleration effects and form complex wave structures in the constant-area extension section, resulting in different local and friction losses.     

多空间机器人协同工作空间的数值求解方法

针对未来在轨服务过程中，可能遇到单个空间机器人难以独立胜任的应用场景，需要多个空间机器人协同操作，但目前针对多空间机器人协同工作空间的研究很少。考虑到解析法计算工作空间难度很大，提出了一种基于蒙特卡洛法的一般协同工作空间数值求解方法。再进一步针对空间机器人协同的特殊性，提出了广义协同工作空间的概念，并给出了数值求解方法。仿真结果表明，基座姿态约束会引起协同工作空间的缩小，同时广义协同工作空间的范围明显大于一般协同工作空间。所得结论可以为空间机器人任务设计与规划提供参考。     

高熵陶瓷研究进展

高熵陶瓷是一类新兴的陶瓷材料,因其独特的结构和性能,近年来受到广泛的关注.本文从高熵陶瓷的定义出发,通过概述固相反应法、前驱体热解法以及放电等离子烧结法等高熵陶瓷制备方法,介绍了合成高熵陶瓷的工艺流程;并且详细阐述了近年来高熵氧化物、高熵碳化物、高熵二硼化物等体系的高熵陶瓷的研究成果,对不同体系的高熵陶瓷的特点和应用前...