Reliability analysis of aero-engine blades considering nonlinear strength degeneration

To comprehensively consider the effects of strength degeneration and failure correlation, an improved stress-strength interference (SSI) model is proposed to analyze the reliability of aeroengine blades with the fatigue failure mode. Two types of TC4 alloy experiments are conducted for the study on the damage accumulation law. All the parameters in the nonlinear damage model are obtained by the tension-compression fatigue tests, and the accuracy of the nonlinear damage model is verified by the damage tests. The strength degeneration model is put forward on the basis of the Chaboche nonlinear damage theory and the Griffith fracture criterion, and determined by measuring the fatigue toughness during the tests. From the comparison of two kinds of degeneration models based on the Miner’s linear law and the nonlinear damage model respectively, the nonlinear model has a significant advantage on prediction accuracy especially in the later period of life. A time-dependent SSI reliability model is established. By computing the stress distribution using the finite element (FE) technique, the reliability of a single blade during the whole service life is obtained. Considering the failure correlation of components, a modified reliability model of aero-engine blades with common cause failure (CCF) is presented. It shows a closer and more reasonable process with the actual working condition. The improved reliability model is illustrated to be applied to aero-engine blades well, and the approach purposed in this paper is suitable for any actual machinery component of aero-engine rotor systems.     

A simulation study on the mode conversion process from slow Z-mode to LO mode by the tunneling effect and variations of beaming angle

For a particular angle of incidence wave, it is possible for a slow Z-mode wave incident on an inhomogeneous plasma slab to be converted into an LO mode wave. But for another wave normal angle of the incident wave, it has been considered impossible, since an evanescence region exists between two mode branches. In this case we expect that the mode conversion takes place through the tunneling effect. We investigate the effect of the spatial scale of the density gradient on the mode conversion efficiency in an inhomogeneous plasma where the mode conversion can occur only by the tunneling effect. We use the computer simulation solving Maxwell’s equations and the motion of a cold electron fluid. By considering the steepness of the density gradient, the simulation results show the efficient mode conversion could be expected even in the case that the mismatch of the refractive indexes prevents the close coupling of plasma waves. Also, we show for these cases the beaming angle does not correspond to Jones’ formula. This effect leads to the angles larger and smaller than the angle estimated by the formula. This type of mode conversion process becomes important in a case where the different plasmas form a discontinuity at their contact boundary.     

共信道干扰环境下星基ADS-B系统监视性能

星基广播式自动相关监视系统（星基ADS-B）是实现广域范围内航空器监视的主要技术手段。为揭示星基ADS-B系统共信道干扰对系统监视性能的影响，提出了星基ADS-B系统监视容量的计算方法。首先给出了星基ADS-B系统模型，随后理论分析给出消息正确接收概率、位置消息更新间隔及位置报告更新间隔的计算公式，以此为基础给出了星基ADS-B系统监视容量的计算公式，最后基于SNS软件构建了星基ADS-B仿真系统，仿真验证了理论结果的正确性。研究表明：星基ADS-B系统的监视容量由ADS-B应用子系统所要求的航空器位置报告更新间隔、航空器-卫星链路的误码率、星-地面站链路的误码率及卫星数目联合确定。     

基于三维有限元的火箭模态振型斜率预示方法研究

振型斜率火箭是姿控系统设计的重要参数,对飞行任务的可靠性与安全性有着至关重要的作用。依据全箭动特性的测量原理及参数定义,结合三维有限元建模方法和模型修正技术,全面考虑了速率陀螺、惯组安装位置处的局部刚度对振型和振型斜率的影响,建立了基于局部细节精细化建模的全箭模态振型斜率预示方法,并总结了3种不同的振型斜率提取方法,提高了振型斜率的预示精度。同时提供了三维模型振型一维化的方法,解决了使用三维有限元模型计算弹性运动方程式系数的难题。     

某型干扰机干扰效果提升研究

通过研究某型干扰机对多普勒雷达速度跟踪系统的干扰方式，分析假多普勒频率产生的干扰工作机理，研究对抗科目训练中该模式干扰效果不佳的具体原因，提出了采用数字移向技术替代行波管移相，增大对雷达回波原载频的抑制度，增强干扰效果。通过对样机的测试验证，给出了两种移相电路的假多普勒干扰比较。     

Applying fuzzy bi-dimensional scenario-based model to the assessment of Mars mission architecture scenarios

Sending man to Mars has been a long-held dream of humankind. NASA plans human planetary explorations using approaches that are technically feasible, have reasonable risks and have relatively low costs. This study presents a novel Multi-Attribute Decision Making (MADM) model for evaluating a range of potential mission scenarios for the human exploration of Mars. The three alternatives identified by the Mission Operations Directorate (MOD) at the Johnson Space Center (JSC) include split mission, combo lander and dual scenarios. The proposed framework subsumes the following key methods: first, the conjunction method is used to minimize the number of alternative mission scenarios; second, the Fuzzy Risk Failure Mode and Effects Analysis (RFMEA) is used to analyze the potential failure of the alternative scenarios; third, the fuzzy group Real Option Analysis (ROA) is used to estimate the expected costs and benefits of the alternative scenarios; and fourth, the fuzzy group permutation approach is used to select the optimal mission scenario. We present the results of a case study at NASA’s Johnson Space center to demonstrate: (1) the complexity of mission scenario selection involving subjective and objective judgments provided by multiple space exploration experts; and (2) a systematic and structured method for aggregating quantitative and qualitative data concerning a large number of competing and conflicting mission events.     

矢量喷流下平尾偏转对飞机气动性能的影响

通过系列参数试验,研究有、无矢量喷流作用下飞机平尾偏转对飞机气动特性、操纵特性以及飞机绕流/矢量喷流之间干扰特性的影响.实验结果表明:在亚音速中小迎角下,有、无矢量喷流时平尾偏转并不影响飞机的纵向静稳定性,只是改变飞机的零升力矩系数m_z0和零升力迎角α₀,但平尾偏转可以较大幅度地改善前体机翼的绕流形态,减缓机翼涡及边条涡的破裂.此外当飞机处于失速状态时,矢量喷流对于涡破裂失速流动表现出强烈的干扰作用,对飞机的气动特性产生了较大的影响,其干扰区域不仅局限于飞机后体,而且还延伸至前机体,该有利气动干扰量可以达到飞机气动力的10%以上.     

空气动力对飞机内藏式导弹分离轨迹影响的低速风洞试验研究

在４ｍ×３ｍ低速风洞中研究了空气动力对战斗机内藏式导弹弹射分离轨迹的影响。采用简单网格法测量了导弹在干扰流场中的气动力，进行了分离轨迹估算，用捕获轨迹试验得到了分离轨迹，选定了最佳弹射力参数。试验结果表明，实验导弹安全分离必须采用弹射力，气动俯仰力矩是影响导弹姿态的重要因素，气动力对分离位置影响较小。     

信号相干周期的计算与测量

对信号的相干周期与有关测量作了研究，说明该合成信号为准周期函数，具有特殊的周期现象和波形，给出了部分求解结果及其应用。