基于模糊条件证据理论的雷达辐射源识别

基于不确定证据与不确定先验知识和谐的思想,利用模糊条件证据理论,给出一种融合模糊先验知识的新的雷达辐射源识别方法。首先,把雷达辐射源模糊观测数据表示为Dempster-Shafer（D—S）证据的随机集形式;然后,计算观测证据与模糊先验知识之间的和谐度;最后,利用模糊条件证据理论把需要融合的证据进行组合。这种方法可充分利用各种不同来源的信息,从而提高雷达识别的可靠性。     

基于FPGA内置RAM的抗辐射有限状态机设计

在现代卫星设计中广泛使用的可重构现场可编程门阵列(FPGA),在空间高能粒子的影响下很容易产生单粒子翻转(SEU),从而功能紊乱甚至失效。在面向航天应用的FPGA设计中,必须采用容错设计技术来弥补器件本身抗辐射能力的不足。本文首先分析了有限状态机(FSM)的内部结构,并指出由于自身电路结构的特点,传统的FPGA容错设计方法应用于FSM时有一定的局限性。然后,针对基于FPGA的FSM容错设计技术进行了研究,根据现代FPGA的结构特点,提出了一种基于FPGA内置双端口随机存取存储器(RAM)、具有周期校验功能的FSM设计方案。经过可靠性分析和实验可以看出,与采用传统容错设计方法的FSM相比,采用本文方案构建的FSM在太空辐射环境下具有更高的长期可靠性、更小的FPGA资源占用量和更低的功耗。     

热平衡等离子体的二维复合流动数值计算

采用中性气体流动欧拉方程的近似因子分解法，耦合等离子体的热平衡模型方程，对用微波产生的等离子体在喷管内二维轴对称复合流动进行了数值计算。计算结果表明：微波等离子体电子数密度不超出临界值，1kW以下功率微波产生的是弱电离等离子体；气流的马赫数分布不受微波加热功率、喷管入口压强的影响，喷管内等离子体中电子数密度随微波功率的加大而增加，随入口压强的增加而减小。     

利用事件委托机制实现双数据窗口的同步显示

DataGrid控件用表格型式显示数据,当两个DataGrid绑定同一数据源时,它们在数据处理与显示方面将保持同步。可是当涉及到控件的滚动条事件时,系统并没有作相应处理,拖动其中一个窗口垂直滚动条时,该数据窗口的数据随之滚动,而另一个窗口的数据和流动条都没有跟着同步滚动,为此,必须编程来解决滚动条,滚动到特定位置的问题。C#的事件委托机制为我们提供了解决这一问题的方法和途径。本文简要介绍了C#的事件委托机制及其实现的方法和步骤,并应用该方法实现了一个具有固定列显示功能的双数据窗口同步显示的实例。     

四极－十六极分区式线型阱中汞离子囚禁仿真研究

利用SIMION软件建立了四极-十六极分区式线型离子阱系统模型，在此基础上仿真模拟了汞离子在四极阱和十六极阱中被囚禁时的第一稳定区，并分析了离子在不同阱中的运动特性。研究了汞离子云在分区式阱中的囚禁体积和速度分布，以及在不同囚禁区域之间的穿梭过程。模拟得出了稳态情况下分区式阱中不同囚禁区域的粒子数密度分布，验证了分区式离子阱中离子云被连续囚禁、穿梭时粒子数衰减和补偿。同时，根据以上数据分析讨论了汞离子囚禁时的多普勒效应，估算了基于此分区式离子阱的汞离子微波钟的性能水平。     

Ozone trends in the mid-latitude stratopause region based on microwave measurements at Lindau (51.66° N, 10.13° E), the ozone reference model,and model calculations

We compared 8 years of ozone measurements taken at Lindau (51.66° N, 10.13° E) at altitudes between 40 and 60 km using the microwave technique with the CIRA ozone reference model that was established 20 years ago (Keating et al., 1990). We observed a remarkable decrease in ozone density in the stratopause region (i.e., an altitude of 50 km), but the decrease in ozone density in the middle mesosphere (i.e., up to 60 km in altitude) is slight. Likewise, we observed only a moderate decrease in the atmospheric region below the stratopause. Other studies have found the strongest ozone decrease at 40 km and a more moderate decrease at 50 km, which is somewhat in contradiction to our results. This decrease in ozone density also strongly depends on the season. Similar results showed model calculations using the GCM COMMA-IAP when considering the increase in methane. In the lower mesosphere/stratopause region, the strongest impact on the concentration of odd oxygen (i.e., O₃ and O) was observed due to a catalytic cycle that destroys odd oxygen, including atomic oxygen and hydrogen radicals. The hydrogen radicals mainly result from an increase in water vapor with the growing anthropogenic release of methane. The finding suggesting that the stratopause region is apparently attacked more strongly by the water vapor increase has been interpreted in terms of the action of this catalytic cycle, which is most effective near the stratopause and amplified by a positive feedback between the ozone column density and the ozone dissociation rate, thereby chemically influencing the ozone density. However, the rising carbon dioxide concentration cools the middle atmosphere, thereby damping the ozone decline by hydrogen radicals.     

Virtex-4系列FPGA纠正单粒子翻转的方法研究

Virtex-4系列FPGA空间应用中易发生单粒子翻转事件,对设备正常功能的完成带来不良影响。文章给出了单粒子翻转的原理。为解决FPGA单粒子翻转问题,结合工程实践对FPGA抗单粒子3种方法进行了分析和比对,提出了“配置存储区回读CRC结果比对”为最优方法,并给出了示例。同时文章也对FPGA回读及擦洗配置命令序列等关键技术进行了研究。     

红外隐身涂层及对雷达吸波性能的影响

研究了红外雷达兼容隐身涂层红外发射率及雷达波隐身兼容性的影响因素,包括填料的类型、质量分数及涂层厚度。研究表明,以填充30wt%的HW-3型铝粉为填料,制备的涂层厚度为20μm时,涂层红外发射率达到0.25,能大幅降低材料表明红外辐射温度,且对微波隐身兼容性良好。     

微波等离子推力器喷管流动数值模拟

为了准确把握微波等离子推力器喷管流动的机理与特点,采用冻结流和非平衡流两种模型对其进行了对比数值模拟分析。非平衡流模型考虑了流动过程中的分解反应、电离反应和复合反应,化学动力学模型为4组分、4反应的有限速率化学反应模型,采用二阶精度NND格式数值求解耦合化学反应源项的N S方程组。数值模拟的结果揭示了喷管内的流场结构,反映了喷管内的离解电离状况,得到了推力器的推力和比冲。分析表明,数值方法有效,计算结果合理,具有工程应用价值,能为相关研究提供参考。     

Study of complex dielectric properties of lunar simulants and comparison with Apollo samples at microwave frequencies

Laboratory characterization of dielectric properties of terrestrial analogues of lunar soil (JSC-1A) and comparison with lunar samples returned from various Apollo missions is made at different as well as normalized bulk density. Here measurements of dielectric constants and losses were made at four microwave frequencies such as 1.7 GHz, 2.5 GHz, 6.6 GHz and 31.6 GHz. Complex permittivity of lunar simulant was measured at temperature ranging from −190 °C to + 200 °C using Wave-Guide cell method. Comparison of permittivity of JSC-1A with Apollo sample also has been done at similar microwave frequencies. The investigations reveal that dielectric constant and loss factor of terrestrial analogues of lunar soil are temperature dependent. As temperature is gradually increased both these parameter (storage factor and loss factor) also gradually increases. These temperatures were chosen because the Moon undergoes at that extremes level of temperature. It is scorching heat at 110 °C during the day and freezing cold at −180 °C during night. The measured value of ε can be useful for designing passive as well as active sensors.