航天项目管理——高技术复杂项目管理

航天项目是高技术项目。航天项目管理是高技术复杂项目管理。人的动机和行为的不确定性以及高新技术的挑战是复杂性的重要根源。高技术项目组织管理需要系统思维,高技术系统研制要采用系统工程方法。系统思维和系统工程方法是项目管理者应对复杂管理局面的有效方法。     

基于全解耦奇偶方程的动态系统执行器故障检测与识别

给出了基于全解耦奇偶方程的动态系统执行器故障的检测与识别方法。讨论了全解耦奇偶向量的产生方法,给出了全解耦奇偶向量的存在条件,并结合卡尔曼滤波方法得到了故障模型参数的估计方法。最后给出了仿真实例。结果表明,全解耦奇偶方程方法能估计出动态系统执行器故障模型。     

基于MATLAB/Simulink的变频电机系统能耗实用模型

变频电机系统能耗分析需要对系统各环节建立准确的损耗计算模型。针对目前有限元模型建模繁琐、计算量大的现状,在考虑了变频电源谐波对铁耗电阻影响的基础上,建立了计及铁耗等效电阻的异步电机数学模型及PWM变频器主电路损耗模型,提出一种基于MATLAB/Simulink的变频电机系统实用模型,实现了变频电机系统各环节损耗准确分析。通过对不同工况下变频器、电机和系统总效率的仿真分析,揭示了传统忽略变频器能耗的损耗分析方法对系统最佳运行点估算存在一定误差。为了验证模型正确性,对一组5.5 kW变频电机系统进行了试验对比,验证了文中模型能够正确有效地模拟变频电机系统运行。研究成果为进一步研究系统能耗最优控制策略提供了重要理论支撑。     

用于直升机现场计量的低频振动校准技术

本文面向直升机健康与使用监测系统(HUMS)的现场计量保障需求,针对其中振动传感器在低频段尚无法实现现场校准的现状,提出了基于直线电机驱动技术的便携式低频振动校准技术方案。该方案利用高精度直线电机构造低频标准振动源,采用稳定性高的石英挠性加速度计作为标准加速度计,具有体积小、精度高、现场环境适应性好的特点,非常适用直升机HUMS的现场计量保障。根据不确定度评估结果,该方案能够实现0.5Hz～20Hz频率范围,0.01m/s~2～20m/s~2加速度范围内不超过1%的校准不确定度(k=2)。     

A formal approach using SysML for capturing functional requirements in avionics domain

In this work, a Model-Based Systems Engineering approach based on SysML is proposed. This approach is used for the capture and the definition of functional requirements in avionics domain. The motivation of this work is triple: guide the capture of functional requirements, validate these functional requirements through functional simulation, and verify efficiently the consistency of these functional requirements. The proposed approach is decomposed into several steps that are detailed to go from conceptual model of avionics domain to a formal functional model that can be simulated in its operating context. To achieve this work, a subset of SysML has been used as an intermediate modelling language to ensure progressive transformation that can be understood and agreed by system stakeholders. Formal concepts are introduced to ensure theoretical consistency of the approach. In addition, transformation rules are defined and the mappings between concepts of ARP4754A civil aircraft guidelines and SysML are formalized through meta-model. The resulting formalization enables engineers to perform functional simulation of the top-level functional architecture extracted from operational scenarios. Finally, the approach has been tested on an industrial avionics system called the Onboard Maintenance System.     

Evaluation and improvement of coastal GNSS reflectometry sea level variations from existing GNSS stations in Taiwan

Global sea level rise due to an increasingly warmer climate has begun to induce hazards, adversely affecting the lives and properties of people residing in low-lying coastal regions and islands. Therefore, it is important to monitor and understand variations in coastal sea level covering offshore regions. Signal-to-noise ratio (SNR) data of Global Navigation Satellite System (GNSS) have been successfully used to robustly derive sea level heights (SLHs). In Taiwan, there are a number of continuously operating GNSS stations, not originally installed for sea level monitoring. They were established in harbors or near coastal regions for monitoring land motion. This study utilizes existing SNR data from three GNSS stations (Kaohsiung, Suao, and TaiCOAST) in Taiwan to compute SLHs with two methods, namely, Lomb–Scargle Periodogram (LSP)-only, and LSP aided with tidal harmonic analysis developed in this study. The results of both methods are compared with co-located or nearby tide gauge records. Due to the poor quality of SNR data, the worst accuracy of SLHs derived from traditional LSP-only method exceeds 1?m at the TaiCOAST station. With our procedure, the standard deviations (STDs) of difference between GNSS-derived SLHs and tide gauge records in Kaohsiung and Suao stations decreased to 10?cm and the results show excellent agreement with tide gauge derived relative sea level records, with STD of differences of 7?cm and correlation coefficient of 0.96. In addition, the absolute GNSS-R sea level trend in Kaohsiung during 2006–2011 agrees well with that derived from satellite altimetry. We conclude that the coastal GNSS stations in Taiwan have the potential of monitoring absolute coastal sea level change accurately when our proposed methodology is used.     

考虑两种失效竞争的多状态冷贮备系统可靠性模型

针对装备系统中多状态工作部件存在退化失效与突发失效竞争的情况,以冷贮备系统为研究对象,假设系统内3个维修台可分别提供预防性维修与两种不同类型的修复性维修,采用随机检测策略,系统性能水平在一定范围内退化时进行预防性维修,部件完全退化失效时进行退化失效修复性维修,而突发失效时进行突发失效修复性维修;利用PH （Phase-type）分布描述模型中各类随机时间变量,外部冲击的到达则采用PH更新过程描述,建立了考虑退化失效与突发失效的多状态冷贮备系统可靠性模型。最后通过算例验证了模型的适用性,演示了预防性维修阈值以及三类维修速率对系统可靠性的影响。     

强不确定系统“全系数之和等于1”的实现方法

摘要： 研究强不确定系统“全系数之和等于1”的实现方法,强不确定系统指的是系统的静态增益及其界不完全确知且范围较大.“全系数之和等于1”是吴宏鑫院士20世纪80年代发现的,该原理表明,对于未知连续系统,其离散化系统的系数的和在一定条件下是1.该原理的发现对于解决闭环辨识和自适应控制的瓶颈问题具有关键作用.“全系数之和等于1”是在一定条件下成立的.为了实现系统的“全系数之和等于1”,需要对系统进行一定的变换,以满足所需条件.其中,采用静态增益的标称值的倒数进行输入变换的方法在实际中得到了广泛应用.但是,当系统的不确定性较大时,该变换将带来较大偏差.针对该问题开展了深入研究,明确给出了系统静态增益的不确定性与标称值的比值的关系对于实现“全系数之和等于1”的影响.当不确定性与标称值的比值较小时,可以近似实现“全系数之和等于1”;当比值较大时,进一步给出了通过选取合适的采样周期,近似实现“全系数之和等于1”的方法.本文的研究对于特征模型理论在实际中的应用提供了一定的基础.     

从战术需求谈战斗机设计的人机综合

基于战斗机战术使用开展人机综合分析。从作战使用需求的角度出发,面向感知、认知和工作负荷的方面,阐述了飞行员与战斗机系统在人机综合时应重点开展的研究工作。利用OODA (探测-确认-决策-攻击)杀伤环的分解形成人机综合战术需求和人机综合权衡流程,并对战斗机设计的不同阶段人机综合应开展的工作和内容进行了描述。本研究对战斗机人机综合设计提供了设计依据与指导。