轴承钢等离子体基离子注碳复合改性层化学结构的研究

通过激光Ｒａｍａｎ光谱、Ｘ射线光电子谱以及电阻和显微硬度的测试，研究了ＧＣｒ１５钢及镀钛ＧＣｒ１５钢试样经乙等离子基离子注入所得表面改性层的化学结构。     

Development and coupling test of active spacecraft potential control – Next generation (ASPOC-NG)

The active spacecraft potential control (ASPOC) system developed in the 1990s emits positive ions to neutralise the spacecraft potential, such as used in several missions like Geotail, Equator-S, Cluster, Doublestar and MMS. With the experience gained, the next generation of the active spacecraft potential control (ASPOC-NG) instrument has been developed over the last three years. Thereby, three emission technologies were tested including Liquid Metal Ion Source (LMIS), Liquid Metal Electron Source (LMES) and Solid Metal Electron Source (SMES). The development of the emitter module by FOTEC and the corresponding electronics control unit by IWF is presented. Optimisations were carried out with the focus on the reduction of mass and power consumption to comply with the requirements of future scientific missions. Coupling tests of the modules and the electronics control unit were performed including range, accuracy and lifetime tests. Both ASPOC-NG instruments for positive and negative charge compensation and their performance values show excellent results.     

沥青浸渍炭化C/ C 复合材料密度及孔隙分布

以径棒法编织成型预制体,采用沥青浸渍炭化工艺制备了C/ C 复合材料(1. 50 g/ cm3 ),采用CT

检测了试件的密度分布特征,并采用光学显微镜和压汞法分析了试件的孔隙分布特征。结果表明,在沥青浸渍

炭化的工艺条件下,试件外端密度最高,由外端到中心沿径向密度递减;以坯体中心为参照点,同一圆周方向密

度均匀分布;坯体开孔率沿径向由外端到中心递增;坯体大孔和中孔孔容积比率沿径向从外端到中心递增,而

微孔孔容积比率则从外端到中心递减。

     

基于SP+模型的航空锂离子电池组优化技术研究

随着多电飞机技术与锂离子电池技术的发展,锂离子电池已经广泛应用于航空领域,除作为应急电池外,越来越多地作为动力电池应用于飞机。因飞机对锂离子电池组质量、体积等特性具有很高的要求,需要对其进行优化设计,而采用基于模型的方法开展优化设计可以有效减少成本并缩短周期。由于SP+电化学模型能够准确反映锂离子电池的工作机理,同时具有精度高、计算简便等特点,因此文中采用SP+模型构建锂离子电池组模型并进行了验证。同时,以典型的用电工况为例,开展了航空锂电池组的优化设计,实现了对锂离子电池组质量与体积的优化。     

基于离子污染度数据分析的航空电子产品水清洗质量提升技术

本文应用ROSE/SEC法测试航空电子产品印制板组件(PCBA)的离子污染度,以测试结果反映水清洗效果,通过工序能力指数Cpk对工艺参数进行评价,同时运用统计过程控制(SPC)对清洗工序进行监控,实现对航空电子产品水清洗工艺清洗质量的提升.试验结果表明,降低PCBA相互遮挡面积可有效降低离子污染度.结合Xbar-S控制...