2219薄板铝合金浮动式双轴肩搅拌摩擦焊接及组织性能分析

以运载火箭助推器贮箱广泛应用的4 mm厚2219薄板铝合金为焊接对象,研制了浮动式双轴肩搅拌头,分析了内部塑性金属流动模式及特点,并推测出需匹配较低焊接热输入才能获得优质焊缝。工艺探索及优化试验结果直接验证了焊缝内部塑性金属流动模式及推测。接头宏观组织形貌分析结果显示:不同焊接速度下的焊缝横截面宏观形貌都可以观察洋葱环特征,且随着焊接速度提高,洋葱环特征越发增多,并从靠近前进侧的焊核区逐渐向后退侧孕育发展,这也有效验证了薄板铝合金双轴肩搅拌头的设计思路。薄板铝合金双轴肩搅拌摩擦焊接头横截面显微硬度分布均呈"U"型,接头显微硬度最低点位于焊核区与后退侧热机影响区的交界处。接头力学性能测试结果显示:随着焊接速度逐渐升高,接头抗拉强度逐渐升高,且当焊接速度达到350 mm/min时,接头抗拉强度达到最高值。铝合金浮动式双轴肩搅拌摩擦焊接头延伸率整体较高,焊接速度对其影响不大。铝合金双轴肩搅拌摩擦焊接头正、背弯均可以达到180°无裂纹。基于立式纵缝搅拌摩擦焊系统成功实现了2 m长试片的浮动式双轴肩搅拌摩擦焊,累计焊接长度达到60 m,且双轴肩搅拌头完整,未发现裂纹、扭曲或其他损伤。     

热处理制度对 K465 合金组织和性能的影响

研究了两种热处理工艺对K465铸造高温合金组织和力学性能的影响,并与原叶片合金进行了对比分析。采用普通工艺和热等静压工艺制造K465合金,利用光学显微镜和扫描电镜观察合金的显微组织形貌,测试了拉伸性能和持久性能。结果表明,与原叶片相比,K465铸造高温合金叶片的组织特点是,晶粒度较小、枝晶组织偏大、γ'相尺寸较大。热等静压工艺可消除K465合金中的铸造疏松,普通工艺叶片的疏松分布较密集。与普通工艺相比,热等静压工艺使合金中γ'相尺寸明显减小,枝晶组织致密化,拉伸性能和持久性能有所提高。K465合金中少量的疏松、致密的枝晶组织、规则的枝晶排列、较小的γ'相尺寸可能是决定叶片良好振动疲劳性能的关键因素。     

改性羰基铁粉/ 硅橡胶材料的制备及其力学性能

以微米级改性羰基铁粉为填充剂,甲基乙烯基硅橡胶为基体,制备了高温硫化的羰基铁粉/硅橡胶复合材料.研究了偶联剂种类、用量及羰基铁粉填充量对复合材料力学性能的影响,利用扫描电镜对硫化胶断面的微观结构进行了观察.结果表明,采用硅烷偶联剂KH570、KH151改性羰基铁粉都能提高复合材料的拉伸强度,其中KH151的改性效果要优于KH570;KH151的最佳用量为羰基铁粉质量的1%;在一定范围内随着改性羰基铁粉体积分数的增加,复合材料的拉伸强度增大.羰基铁粉体积分数超过60%后,混炼困难.     

Nb-Si 基超高温合金的研究进展

Nb-Si基超高温合金由于熔点高、密度低和优良的高温强度等特点受到广泛关注,极具作为下一代高推重比航空发动机和超然冲压发动机的热端部件用材料的潜力.本文主要介绍了国内外在合金化、粉末冶金、定向凝固和热处理工艺对Nb-Si基合金组织和性能影响等方面的研究现状,并展望了其发展趋势.     

Microstructure and mechanical properties of hybrid fabricated 1Cr12Ni2WMoVNb steel by laser melting deposition

 Laser melting deposition was carried out to deposit a 1Cr12Ni2WMoVNb steel bar on a wrought bar of same material. Room-temperature tensile properties of the hybrid fabricated 1Cr12Ni2WMoVNb steel sample were evaluated, and microstructure, fracture surface morphology, and hardness profile were analyzed by an optical microscope (OM), a scanning electron microscope (SEM), and a hardness tester. Results show that the hybrid fabricated 1Cr12Ni2WMoVNb steel sample consists of laser deposited zone, wrought substrate zone, and heat affected zone (HAZ) of the wrought substrate. The laser deposited zone has coarse columnar prior austenite grains and fine well-aligned dendritic structure, while the HAZ of the wrought substrate has equiaxed prior austenite grains which are notably finer than those in the wrought substrate zone. Besides, austenitic transformation mechanism of the HAZ of the wrought substrate is different from that of the laser deposited zone during the reheating period of the laser deposition, which determines the different prior austenite grain morphologies of the two zones. Microhardness values of both the laser deposited zone and the HAZ of the wrought substrate are higher than that of the wrought substrate zone. Tensile properties of the hybrid fabricated 1Cr12Ni2WMoVNb steel sample are comparable to those of the wrought bar, and fracture occurs in the wrought substrate zone during the tensile test.     

基于仿真的机械产品设计系统

分析了现有CAD/CAE方法与产品设计的需求差异,指出:首先,性能分析与设计是机械产品设计的核心;其次,集成了CAD/CAE技术的产品设计应该是以CAE为中心的设计过程。提出了基于仿真的产品设计方法,构造了一种面向性能的产品设计系统。     

"机械制图"教学方法探索

“机械制图”是工科院校特别是机械类专业非常重要的专业基础课，也是学生普遍反映很不好学的一门课程。随着教学改革的深入，“机械制图”教学课时的压缩，有必要研究探索行之有效的教学方法以适应目前的教学环境。使教师能更好地为学生“答疑、解惑”。     

Multi-objective optimization of different dome reinforcement methods for composite cases

A multi-objective optimization method was proposed for different dome reinforcement methods of a filament-wound solid rocket motor composite case based on a Radial Basis Function (RBF) model. Progressive damage of the composite case was considered in a simulation based on Hashin failure criteria, and simulation results were validated by hydraulic burst tests to precisely predict the failure mode, failure position, and burst pressure. An RBF surrogate model was established and evaluated by Relative Average Absolute Error (RAAE), Relative Maximum Absolute Error (RMAE), Root Mean Squared Error (RMSE), and R² methods to improve the optimization efficient of dome reinforcement. In addition, the Non-dominated Sorting Genetic Algorithm (NSGA-II) was employed to establish multi-objective optimization models of variable-angle and variable-polar-radius dome reinforcements to investigate the coupling effect of the reinforcement angle, reinforcement layers, and reinforcement range on the case performance. Optimal reinforcement parameters were obtained and used to establish a progressive damage model of the composite case with dome reinforcement. In accordance with progressive damage analysis, the burst pressure and performance factor were obtained. Results illustrated that variable-angle dome reinforcement was the optimal reinforcement method compared with variable-polar-radius dome reinforcement as it could not only ensure the reinforcement angle’s continuous changing but also decrease the mass of composite materials. Compared with the unreinforced case, the reinforced case exhibited an increase in the burst pressure and performance factor of 36.1% and 23.5%, respectively.     

电弧增材制造7075铝合金的微观组织与力学性能

7xxx系铝合金电弧增材制造过程中因组织不均匀与元素偏析导致成形试样性能较低,针对这一问题,对电弧增材制造7075铝合金薄壁件进行固溶+人工时效热处理(T6态),对比研究了热处理前后微观组织与力学性能的变化。结果表明,7075铝合金沉积态试样中晶粒被网状共晶组织包围,Zn、Mg和Cu元素在晶界富集,产生元素偏析。经过T6态热处理后,大部分共晶组织溶解,元素分布的不均匀性得到明显改善。与沉积态试样相比,热处理后试样的抗拉强度与断后伸长率增加,抗拉强度从(279.4±5.3)MPa提高至(493.9±10.2)MPa,断后伸长率从3.78%±0.35%增加到9.66%±1.70%。T6态试样的拉伸断口表面密布着韧窝,断裂方式为韧性断裂。     

酚醛树脂分布对芳纶纸蜂窝力学性能的影响

采用两种浸胶工艺制作树脂分布不同的3种规格蜂窝芳纶纸蜂窝,对蜂窝进行力学性能测试和蜂窝孔壁树脂分布微观观察,研究了酚醛树脂分布、蜂窝孔壁厚度对芳纶纸蜂窝力学性能的影响。结果表明:酚醛树脂充分流淌后会使蜂窝的压缩强度提高8%~40%,剪切强度下降9%~21%;树脂在蜂窝节点端部形成胶柱是蜂窝压缩性能提高的主要原因,但胶柱的形成会使蜂窝孔壁的平均厚度下降,导致蜂窝的剪切性能下降。