Research on failure criterion of composite based on unified macro- and micro-mechanical model

A new unified macro- and micro-mechanics failure analysis method for composite structures was developed in order to take the effects of composite micro structure into consideration. In this method, the macro stress distribution of composite structure was calculated by commercial finite element analysis software. According to the macro stress distribution, the damage point was searched and the micro-stress distribution was calculated by reformulated finite-volume direct averaging micromechanics (FVDAM), which was a multi-scale finite element method for composite. The micro structure failure modes were estimated with the failure strength of constituents. A unidirectional composite plate with a circular hole in the center under two kinds of loads was analyzed with the traditional macro-mechanical failure analysis method and the unified macro- and micro-mechanics failure analysis method. The results obtained by the two methods are consistent, which show this new method’s accuracy and efficiency.     

A method of multi-objective reliability tolerance design for electronic circuits

Tolerance design plays an important role in reliability design for electronic circuits. The traditional method only focuses on the consistency of output response. It is not able to meet the needs of increasing development of electronic products. This paper researches the state of related fields and proposes a method of multi-objective reliability tolerance design. The characteristics of output response and operating stresses on critical components are both defined as design objectives. Critical components and their operating stresses are determined by failure mode and effect analysis (FMEA) and fault tree analysis (FTA). Sensitivity analysis is carried out to determine sensitive parameters that affect the design objectives significantly. Monte Carlo and worst-case analysis are utilized to explore the tolerance levels of sensitive parameters. Design of experiment and regression analysis are applied in this method. The optimal tolerance levels are selected in accord with a quality-cost model to improve consistency of output response and reduce failure rates of critical components synchronously. The application in light-emitting diode (LED) drivers indicates details and potential. It shows that the proposed method provides a more effective way to improve performance and reliability of electronic circuits.     

装备项目质量进度成本一体化监督方法研究

从项目管理中的三角关系,装备质量进度成本一体化监督模型的可操作性和监督结果的可信性等方面,分析了武器装备质量进度成本一体化监督需求,研究了装备项目一体化监督函数具有的依概率收敛、边际效益递减律和极值等条件,利用卡诺质量模型,以统计均衡分析方法为手段,阐述了项目管理一体化监督函数的生成及求解过程.结合装备研制过程,采用定性分析与定量计算相结合的方式,在大质量观的主导下,以直-8型直升机典型故障为实例,阐明了项目一体化监督函数的求解过程,开展了项目监督风险决策和风险预警工作.     

基于CFD的变后掠翼单速度最优后掠角预测模型

为延长飞行器续航时间,探索变后掠翼飞行器控制规律,根据新型变后掠翼飞行器模型,探究了通过飞行器速度及迎角来控制弹翼后掠角度,以达到最优气动性能,从而使该飞行器获得更长续航力.选取飞行马赫数为0.4～0.8、前缘后掠角度为15°～45°内的39个关键点,在迎角为0°～14°范围内进行CFD仿真,将仿真结果在不同数学模型下...     

Ionospheric electron density over Resolute Bay according to E-CHAIM model and RISR radar measurements

In this study, predictions of the E-CHAIM ionospheric model are compared with measurements by the incoherent scatter radars RISR at Resolute Bay, Canada, in the northern polar cap. Reasonable coverage was available for all seasons except winter for which no conclusions were drawn. It is shown that ratios of the model-to measured electron densities are close to unity in the central part of the F layer, around its peak. This is particularly evident for summer daytime. Distributions of the ratios are wider for other seasons indicating larger number of cases when the model underestimates or overestimates. E-CHAIM underestimates the electron density at ionospheric topside and bottomside by ～ 10–20 %. At the bottomside, the underestimations are strongest in summer and equinoctial nighttime. At the topside, the underestimations are strongest in autumn nighttime. Model overestimations are noticeable in the middle part of the F layer during dawn hours in autumn. Overall, the model tends to not predict highest-observed peak electron densities and the largest-observed heights of the peak.     

Variations in cosmic ray cutoff rigidities during the great geomagnetic storm of November 2004

A very strong interplanetary and magnetospheric disturbance observed on 7–13 November 2004 can be regarded as one of the strongest events during the entire period of space observations. In this paper we report on the studies of cosmic ray cutoff rigidity variations during 7–13 November 2004 showing how storm conditions can affect the direct cosmic ray access to the inner magnetosphere. Effective cutoff rigidities have been calculated for selected points on the ground by tracing trajectories of cosmic ray particles through the magnetospheric magnetic field of the “storm-oriented” Tsyganenko 2003 model. Cutoff rigidity variations have also been determined by the spectrographic global survey method on the basis of experimental data of the neutron monitor network. Relations between the calculated and experimental cutoff rigidities and the geomagnetic Dst-index and interplanetary parameters have been investigated. Correlation coefficients between the cutoff rigidities obtained by the trajectory tracing method and the spectrographic global survey method have been found to be in the limits 0.76–0.89 for all stations except the low-latitude station Tokyo (0.35). The most pronounced correlation has been revealed between the cutoff rigidities that exhibited a very large variation of ∼1–1.5 GV during the magnetic storm and the Dst index.     

Finite element reconstruction approach for on-orbit spacecraft breakup dynamics simulation and fragment analysis

Breakup model is the key area of space debris environment modeling. NASA standard breakup model is currently the most widely used for general-purpose. It is a statistical model found based on space surveillance data and a few ground-based test data. NASA model takes the mass, impact velocity magnitude for input and provides the fragment size, area-to-mass ratio, velocity magnitude distributions for output. A more precise approach for spacecraft disintegration fragment analysis is presented in this paper. This approach is based on hypervelocity impact dynamics and takes the shape, material, internal structure and impact location etc. of spacecraft and impactor, which might greatly affect the fragment distribution, into consideration. The approach is a combination of finite element and particle methods, entitled finite element reconstruction (FER). By reconstructing elements from the particle debris cloud, reliable individual fragments are identified. Fragment distribution is generated with undirected graph conversion and connected component analysis. Ground-based test from literature is introduced for verification. In the simulation satellite targets and impactors are modeled in detail including the shape, material, internal structure and so on. FER output includes the total number of fragments and the mass, size and velocity vector of each fragment. The reported fragment distribution of FER shows good agreement with the test, and has good accuracy for small fragments.     

An improved approach to model regional ionosphere and accelerate convergence for precise point positioning

Given the severe effects of the ionosphere on global navigation satellite system (GNSS) signals, single-frequency (SF) precise point positioning (PPP) users can only achieve decimeter-level positioning results. Ionosphere-free combinations can eliminate the majority of ionospheric delay, but increase observation noise and slow down dual-frequency (DF) PPP convergence. In this paper, we develop a regional ionosphere modeling and rapid convergence approach to improve SF PPP (SFPPP) accuracy and accelerate DF PPP (DFPPP) convergence speed. Instead of area model, ionospheric delay is modeled for each satellite to be used as a priori correction. With the ionospheric, wide-lane uncalibrated phase delay (UPD) and residuals satellite DCBs product, the wide-lane observations for DF users change to be high-precision pseudorange observations. The validation of a continuously operating reference station (CORS) network was analyzed. The experimental results confirm that the approach considerably improves the accuracy of SFPPP. For DF users, convergence time is substantially reduced.     

利用热平衡试验稳态数据修正对接机构热模型

根据热平衡试验数据与计算结果的比较,分析两者存在差异的原因,用热平衡试验稳态工况数据修正对接机构热模型中的单元划分和热网络方程。研究了对热网络方程修正的方法,基于参数化和节点群概念改进参数化节点群整合方法,以明显减少需修正系数的数量,并与分级修正和局部修正综合,提高热网络修正方法的实用性。算例表明：通过热模型修正使温度计算值与试验值的偏差达到允许的要求,表明该热模型修正方法有效。     

用于微小卫星自主导航控制系统地面仿真的磁强计数学模型

对基于磁强计自主导航微小卫星控制系统地面仿真的磁强计数学模型建立进行了研究。给出了地磁场理论数据的生成模型及磁强计的测量模型,并据此建立了磁强计测量数据生成的数学模型。对低轨圆轨道微小卫星的仿真计算结果表明：由该磁强计数学模型获得的磁场强度测量值与文献中真实磁强计测量数据差异很小,验证了模型的有效性和准确性。